mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
e9624f304d
This fixes eth0 not initializing properly. Both eth0 and eth1 use the MDIO interface on eth1 to access their PHYs. However, without DM_ETH_PHY, eth0 still tries to use its own MDIO interface to access its phy. Before this patch, a boot log might contain lines like Net: Warning: ethernet@20b4000 using MAC address from ROM eth1: ethernet@20b4000 [PRIME]Could not get PHY for FEC0: addr 2 After this patch they now look like Net: Warning: ethernet@20b4000 using MAC address from ROM eth1: ethernet@20b4000 [PRIME]Get shared mii bus on ethernet@2188000 Warning: ethernet@2188000 using MAC address from ROM , eth0: ethernet@2188000 As an alternative to DM_ETH_PHY, FEC_MXC_SHARE_MDIO could also have been used to achieve the same effect. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
62 lines
1.4 KiB
Text
62 lines
1.4 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_MX6=y
|
|
CONFIG_SYS_TEXT_BASE=0x87800000
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_SYS_MEMTEST_START=0x80000000
|
|
CONFIG_SYS_MEMTEST_END=0x88000000
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_OFFSET=0xC0000
|
|
CONFIG_MX6ULL=y
|
|
CONFIG_TARGET_MX6ULL_14X14_EVK=y
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk"
|
|
CONFIG_SUPPORT_RAW_INITRD=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ullevk/imximage.cfg"
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_MEMTEST=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_SYS_MMC_ENV_DEV=1
|
|
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
|
CONFIG_BOUNCE_BUFFER=y
|
|
CONFIG_DM_74X164=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_DM_MMC=y
|
|
CONFIG_FSL_USDHC=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_MODE=0
|
|
CONFIG_SF_DEFAULT_SPEED=40000000
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_MICREL=y
|
|
CONFIG_PHY_MICREL_KSZ8XXX=y
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_DM_ETH_PHY=y
|
|
CONFIG_FEC_MXC=y
|
|
CONFIG_MII=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_IMX6=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_MXC_UART=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_FSL_QSPI=y
|
|
CONFIG_IMX_THERMAL=y
|