u-boot/board/freescale/mx6ullevk
Simon Glass 382bee57f1 env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:22:18 -04:00
..
imximage.cfg imx: s/docs\/README.imximage/doc\/README.imximage/g 2016-10-26 16:53:16 +02:00
Kconfig arm: imx: add i.MX6ULL 14x14 EVK board support 2016-10-04 15:42:07 +02:00
MAINTAINERS mx6ullevk: Add missing MAINTAINERS for mx6ull_14x14_evk_plugin_defconfig 2017-01-08 10:07:10 -05:00
Makefile arm: imx: add i.MX6ULL 14x14 EVK board support 2016-10-04 15:42:07 +02:00
mx6ullevk.c env: Rename setenv() to env_set() 2017-08-16 08:22:18 -04:00
plugin.S imx: mx6ullevk: support plugin 2016-10-24 10:58:18 +02:00
README mx6ull_14x14_evk: Add README file 2016-11-13 15:54:35 -05:00

How to use U-Boot on Freescale MX6ULL 14x14 EVK
----------------------------------------------

- First make sure you have installed the dtc package (device tree compiler):

$ sudo apt-get install device-tree-compiler

- Build U-Boot for MX6ULL 14x14 EVK:

$ make mrproper
$ make mx6ull_14x14_evk_defconfig
$ make

This generates the u-boot-dtb.imx image in the current directory.

- Flash the u-boot-dtb.imx image into the micro SD card:

$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 && sync

- Jumper settings:

SW601: 0 0 1 0
Sw602: 1 0

Where 0 means bottom position and 1 means top position (from the switch label
numbers reference).

Connect the USB cable between the EVK and the PC for the console.
(The USB console connector is the one close the push buttons)

Insert the micro SD card in the board, power it up and U-Boot messages should
come up.

The link for the board: http://www.nxp.com/products/microcontrollers-and- \
processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/ \
i.mx6qp/evaluation-kit-for-the-i.mx-6ull-applications-processor:MCIMX6ULL-EVK