mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
235 lines
6.7 KiB
C
235 lines
6.7 KiB
C
/*
|
|
* (C) Copyright 2011
|
|
* Logic Product Development <www.logicpd.com>
|
|
*
|
|
* Author :
|
|
* Peter Barada <peter.barada@logicpd.com>
|
|
*
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <flash.h>
|
|
#include <nand.h>
|
|
#include <i2c.h>
|
|
#include <twl4030.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-types.h>
|
|
#include "omap3logic.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* two dimensional array of strucures containining board name and Linux
|
|
* machine IDs; row it selected based on CPU column is slected based
|
|
* on hsusb0_data5 pin having a pulldown resistor
|
|
*/
|
|
static struct board_id {
|
|
char *name;
|
|
int machine_id;
|
|
} boards[2][2] = {
|
|
{
|
|
{
|
|
.name = "OMAP35xx SOM LV",
|
|
.machine_id = MACH_TYPE_OMAP3530_LV_SOM,
|
|
},
|
|
{
|
|
.name = "OMAP35xx Torpedo",
|
|
.machine_id = MACH_TYPE_OMAP3_TORPEDO,
|
|
},
|
|
},
|
|
{
|
|
{
|
|
.name = "DM37xx SOM LV",
|
|
.machine_id = MACH_TYPE_DM3730_SOM_LV,
|
|
},
|
|
{
|
|
.name = "DM37xx Torpedo",
|
|
.machine_id = MACH_TYPE_DM3730_TORPEDO,
|
|
},
|
|
},
|
|
};
|
|
|
|
/*
|
|
* BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
|
|
*/
|
|
#define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */
|
|
|
|
/*
|
|
* Routine: board_init
|
|
* Description: Early hardware init.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
struct board_id *board;
|
|
unsigned int val;
|
|
|
|
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
|
|
|
|
/* boot param addr */
|
|
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
|
|
|
|
/*
|
|
* To identify between a SOM LV and Torpedo module,
|
|
* a pulldown resistor is on hsusb0_data5 for the SOM LV module.
|
|
* Drive the pin (and let it soak), then read it back.
|
|
* If the pin is still high its a Torpedo. If low its a SOM LV
|
|
*/
|
|
|
|
/* Mux hsusb0_data5 as a GPIO */
|
|
MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4));
|
|
|
|
if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {
|
|
|
|
/*
|
|
* Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV
|
|
* will drain the voltage.
|
|
*/
|
|
gpio_direction_output(BOARD_ID_GPIO, 0);
|
|
gpio_set_value(BOARD_ID_GPIO, 1);
|
|
|
|
/* Let it soak for a bit */
|
|
sdelay(0x100);
|
|
|
|
/*
|
|
* Read state of BOARD_ID_GPIO as an input and if its set.
|
|
* If so the board is a Torpedo
|
|
*/
|
|
gpio_direction_input(BOARD_ID_GPIO);
|
|
val = gpio_get_value(BOARD_ID_GPIO);
|
|
gpio_free(BOARD_ID_GPIO);
|
|
|
|
board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val];
|
|
printf("Board: %s\n", board->name);
|
|
|
|
/* Set the machine_id passed to Linux */
|
|
gd->bd->bi_arch_number = board->machine_id;
|
|
}
|
|
|
|
/* restore hsusb0_data5 pin as hsusb0_data5 */
|
|
MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
return omap_mmc_init(0, 0, 0, -1, -1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMC911X
|
|
/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
|
|
static const u32 gpmc_lan92xx_config[] = {
|
|
NET_LAN92XX_GPMC_CONFIG1,
|
|
NET_LAN92XX_GPMC_CONFIG2,
|
|
NET_LAN92XX_GPMC_CONFIG3,
|
|
NET_LAN92XX_GPMC_CONFIG4,
|
|
NET_LAN92XX_GPMC_CONFIG5,
|
|
NET_LAN92XX_GPMC_CONFIG6,
|
|
};
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],
|
|
CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
|
|
|
|
return smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* IEN - Input Enable
|
|
* IDIS - Input Disable
|
|
* PTD - Pull type Down
|
|
* PTU - Pull type Up
|
|
* DIS - Pull type selection is inactive
|
|
* EN - Pull type selection is active
|
|
* M0 - Mode 0
|
|
* The commented string gives the final mux configuration for that pin
|
|
*/
|
|
|
|
/*
|
|
* Routine: set_muxconf_regs
|
|
* Description: Setting up the configuration Mux registers specific to the
|
|
* hardware. Many pins need to be moved from protect to primary
|
|
* mode.
|
|
*/
|
|
void set_muxconf_regs(void)
|
|
{
|
|
/*GPMC*/
|
|
MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M0));
|
|
MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M4));
|
|
MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | DIS | M1)); /*GPMC_IO_DIR*/
|
|
MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0));
|
|
|
|
/*Expansion card */
|
|
MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
|
|
MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
|
|
|
|
/* Serial Console */
|
|
MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0));
|
|
MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0));
|
|
MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0));
|
|
MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0));
|
|
|
|
/* I2C */
|
|
MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
|
|
|
|
MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0));
|
|
|
|
/*Control and debug */
|
|
MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0));
|
|
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0));
|
|
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0));
|
|
MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0));
|
|
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
|
|
}
|