mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
73b5396b25
When the DDR3 speed goes higher, we need to utilize fine offset from SPD. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
341 lines
16 KiB
C
341 lines
16 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef _DDR_SPD_H_
|
|
#define _DDR_SPD_H_
|
|
|
|
/*
|
|
* Format from "JEDEC Standard No. 21-C,
|
|
* Appendix D: Rev 1.0: SPD's for DDR SDRAM
|
|
*/
|
|
typedef struct ddr1_spd_eeprom_s {
|
|
unsigned char info_size; /* 0 # bytes written into serial memory */
|
|
unsigned char chip_size; /* 1 Total # bytes of SPD memory device */
|
|
unsigned char mem_type; /* 2 Fundamental memory type */
|
|
unsigned char nrow_addr; /* 3 # of Row Addresses on this assembly */
|
|
unsigned char ncol_addr; /* 4 # of Column Addrs on this assembly */
|
|
unsigned char nrows; /* 5 Number of DIMM Banks */
|
|
unsigned char dataw_lsb; /* 6 Data Width of this assembly */
|
|
unsigned char dataw_msb; /* 7 ... Data Width continuation */
|
|
unsigned char voltage; /* 8 Voltage intf std of this assembly */
|
|
unsigned char clk_cycle; /* 9 SDRAM Cycle time @ CL=X */
|
|
unsigned char clk_access; /* 10 SDRAM Access from Clk @ CL=X (tAC) */
|
|
unsigned char config; /* 11 DIMM Configuration type */
|
|
unsigned char refresh; /* 12 Refresh Rate/Type */
|
|
unsigned char primw; /* 13 Primary SDRAM Width */
|
|
unsigned char ecw; /* 14 Error Checking SDRAM width */
|
|
unsigned char min_delay; /* 15 for Back to Back Random Address */
|
|
unsigned char burstl; /* 16 Burst Lengths Supported */
|
|
unsigned char nbanks; /* 17 # of Banks on SDRAM Device */
|
|
unsigned char cas_lat; /* 18 CAS# Latencies Supported */
|
|
unsigned char cs_lat; /* 19 CS# Latency */
|
|
unsigned char write_lat; /* 20 Write Latency (aka Write Recovery) */
|
|
unsigned char mod_attr; /* 21 SDRAM Module Attributes */
|
|
unsigned char dev_attr; /* 22 SDRAM Device Attributes */
|
|
unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time @ CL=X-0.5 */
|
|
unsigned char clk_access2; /* 24 SDRAM Access from
|
|
Clk @ CL=X-0.5 (tAC) */
|
|
unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time @ CL=X-1 */
|
|
unsigned char clk_access3; /* 26 Max Access from Clk @ CL=X-1 (tAC) */
|
|
unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/
|
|
unsigned char trrd; /* 28 Min Row Active to Row Active (tRRD) */
|
|
unsigned char trcd; /* 29 Min RAS to CAS Delay (tRCD) */
|
|
unsigned char tras; /* 30 Minimum RAS Pulse Width (tRAS) */
|
|
unsigned char bank_dens; /* 31 Density of each bank on module */
|
|
unsigned char ca_setup; /* 32 Addr + Cmd Setup Time Before Clk */
|
|
unsigned char ca_hold; /* 33 Addr + Cmd Hold Time After Clk */
|
|
unsigned char data_setup; /* 34 Data Input Setup Time Before Strobe */
|
|
unsigned char data_hold; /* 35 Data Input Hold Time After Strobe */
|
|
unsigned char res_36_40[5];/* 36-40 reserved for VCSDRAM */
|
|
unsigned char trc; /* 41 Min Active to Auto refresh time tRC */
|
|
unsigned char trfc; /* 42 Min Auto to Active period tRFC */
|
|
unsigned char tckmax; /* 43 Max device cycle time tCKmax */
|
|
unsigned char tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */
|
|
unsigned char tqhs; /* 45 Max Read DataHold skew (tQHS) */
|
|
unsigned char res_46; /* 46 Reserved */
|
|
unsigned char dimm_height; /* 47 DDR SDRAM DIMM Height */
|
|
unsigned char res_48_61[14]; /* 48-61 Reserved */
|
|
unsigned char spd_rev; /* 62 SPD Data Revision Code */
|
|
unsigned char cksum; /* 63 Checksum for bytes 0-62 */
|
|
unsigned char mid[8]; /* 64-71 Mfr's JEDEC ID code per JEP-106 */
|
|
unsigned char mloc; /* 72 Manufacturing Location */
|
|
unsigned char mpart[18]; /* 73 Manufacturer's Part Number */
|
|
unsigned char rev[2]; /* 91 Revision Code */
|
|
unsigned char mdate[2]; /* 93 Manufacturing Date */
|
|
unsigned char sernum[4]; /* 95 Assembly Serial Number */
|
|
unsigned char mspec[27]; /* 99-127 Manufacturer Specific Data */
|
|
|
|
} ddr1_spd_eeprom_t;
|
|
|
|
/*
|
|
* Format from "JEDEC Appendix X: Serial Presence Detects for DDR2 SDRAM",
|
|
* SPD Revision 1.2
|
|
*/
|
|
typedef struct ddr2_spd_eeprom_s {
|
|
unsigned char info_size; /* 0 # bytes written into serial memory */
|
|
unsigned char chip_size; /* 1 Total # bytes of SPD memory device */
|
|
unsigned char mem_type; /* 2 Fundamental memory type */
|
|
unsigned char nrow_addr; /* 3 # of Row Addresses on this assembly */
|
|
unsigned char ncol_addr; /* 4 # of Column Addrs on this assembly */
|
|
unsigned char mod_ranks; /* 5 Number of DIMM Ranks */
|
|
unsigned char dataw; /* 6 Module Data Width */
|
|
unsigned char res_7; /* 7 Reserved */
|
|
unsigned char voltage; /* 8 Voltage intf std of this assembly */
|
|
unsigned char clk_cycle; /* 9 SDRAM Cycle time @ CL=X */
|
|
unsigned char clk_access; /* 10 SDRAM Access from Clk @ CL=X (tAC) */
|
|
unsigned char config; /* 11 DIMM Configuration type */
|
|
unsigned char refresh; /* 12 Refresh Rate/Type */
|
|
unsigned char primw; /* 13 Primary SDRAM Width */
|
|
unsigned char ecw; /* 14 Error Checking SDRAM width */
|
|
unsigned char res_15; /* 15 Reserved */
|
|
unsigned char burstl; /* 16 Burst Lengths Supported */
|
|
unsigned char nbanks; /* 17 # of Banks on Each SDRAM Device */
|
|
unsigned char cas_lat; /* 18 CAS# Latencies Supported */
|
|
unsigned char mech_char; /* 19 DIMM Mechanical Characteristics */
|
|
unsigned char dimm_type; /* 20 DIMM type information */
|
|
unsigned char mod_attr; /* 21 SDRAM Module Attributes */
|
|
unsigned char dev_attr; /* 22 SDRAM Device Attributes */
|
|
unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time @ CL=X-1 */
|
|
unsigned char clk_access2; /* 24 SDRAM Access from Clk @ CL=X-1 (tAC) */
|
|
unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time @ CL=X-2 */
|
|
unsigned char clk_access3; /* 26 Max Access from Clk @ CL=X-2 (tAC) */
|
|
unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/
|
|
unsigned char trrd; /* 28 Min Row Active to Row Active (tRRD) */
|
|
unsigned char trcd; /* 29 Min RAS to CAS Delay (tRCD) */
|
|
unsigned char tras; /* 30 Minimum RAS Pulse Width (tRAS) */
|
|
unsigned char rank_dens; /* 31 Density of each rank on module */
|
|
unsigned char ca_setup; /* 32 Addr+Cmd Setup Time Before Clk (tIS) */
|
|
unsigned char ca_hold; /* 33 Addr+Cmd Hold Time After Clk (tIH) */
|
|
unsigned char data_setup; /* 34 Data Input Setup Time
|
|
Before Strobe (tDS) */
|
|
unsigned char data_hold; /* 35 Data Input Hold Time
|
|
After Strobe (tDH) */
|
|
unsigned char twr; /* 36 Write Recovery time tWR */
|
|
unsigned char twtr; /* 37 Int write to read delay tWTR */
|
|
unsigned char trtp; /* 38 Int read to precharge delay tRTP */
|
|
unsigned char mem_probe; /* 39 Mem analysis probe characteristics */
|
|
unsigned char trctrfc_ext; /* 40 Extensions to trc and trfc */
|
|
unsigned char trc; /* 41 Min Active to Auto refresh time tRC */
|
|
unsigned char trfc; /* 42 Min Auto to Active period tRFC */
|
|
unsigned char tckmax; /* 43 Max device cycle time tCKmax */
|
|
unsigned char tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */
|
|
unsigned char tqhs; /* 45 Max Read DataHold skew (tQHS) */
|
|
unsigned char pll_relock; /* 46 PLL Relock time */
|
|
unsigned char Tcasemax; /* 47 Tcasemax */
|
|
unsigned char psiTAdram; /* 48 Thermal Resistance of DRAM Package from
|
|
Top (Case) to Ambient (Psi T-A DRAM) */
|
|
unsigned char dt0_mode; /* 49 DRAM Case Temperature Rise from Ambient
|
|
due to Activate-Precharge/Mode Bits
|
|
(DT0/Mode Bits) */
|
|
unsigned char dt2n_dt2q; /* 50 DRAM Case Temperature Rise from Ambient
|
|
due to Precharge/Quiet Standby
|
|
(DT2N/DT2Q) */
|
|
unsigned char dt2p; /* 51 DRAM Case Temperature Rise from Ambient
|
|
due to Precharge Power-Down (DT2P) */
|
|
unsigned char dt3n; /* 52 DRAM Case Temperature Rise from Ambient
|
|
due to Active Standby (DT3N) */
|
|
unsigned char dt3pfast; /* 53 DRAM Case Temperature Rise from Ambient
|
|
due to Active Power-Down with
|
|
Fast PDN Exit (DT3Pfast) */
|
|
unsigned char dt3pslow; /* 54 DRAM Case Temperature Rise from Ambient
|
|
due to Active Power-Down with Slow
|
|
PDN Exit (DT3Pslow) */
|
|
unsigned char dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from Ambient
|
|
due to Page Open Burst Read/DT4R4W
|
|
Mode Bit (DT4R/DT4R4W Mode Bit) */
|
|
unsigned char dt5b; /* 56 DRAM Case Temperature Rise from Ambient
|
|
due to Burst Refresh (DT5B) */
|
|
unsigned char dt7; /* 57 DRAM Case Temperature Rise from Ambient
|
|
due to Bank Interleave Reads with
|
|
Auto-Precharge (DT7) */
|
|
unsigned char psiTApll; /* 58 Thermal Resistance of PLL Package form
|
|
Top (Case) to Ambient (Psi T-A PLL) */
|
|
unsigned char psiTAreg; /* 59 Thermal Reisitance of Register Package
|
|
from Top (Case) to Ambient
|
|
(Psi T-A Register) */
|
|
unsigned char dtpllactive; /* 60 PLL Case Temperature Rise from Ambient
|
|
due to PLL Active (DT PLL Active) */
|
|
unsigned char dtregact; /* 61 Register Case Temperature Rise from
|
|
Ambient due to Register Active/Mode Bit
|
|
(DT Register Active/Mode Bit) */
|
|
unsigned char spd_rev; /* 62 SPD Data Revision Code */
|
|
unsigned char cksum; /* 63 Checksum for bytes 0-62 */
|
|
unsigned char mid[8]; /* 64 Mfr's JEDEC ID code per JEP-106 */
|
|
unsigned char mloc; /* 72 Manufacturing Location */
|
|
unsigned char mpart[18]; /* 73 Manufacturer's Part Number */
|
|
unsigned char rev[2]; /* 91 Revision Code */
|
|
unsigned char mdate[2]; /* 93 Manufacturing Date */
|
|
unsigned char sernum[4]; /* 95 Assembly Serial Number */
|
|
unsigned char mspec[27]; /* 99-127 Manufacturer Specific Data */
|
|
|
|
} ddr2_spd_eeprom_t;
|
|
|
|
typedef struct ddr3_spd_eeprom_s {
|
|
/* General Section: Bytes 0-59 */
|
|
unsigned char info_size_crc; /* 0 # bytes written into serial memory,
|
|
CRC coverage */
|
|
unsigned char spd_rev; /* 1 Total # bytes of SPD mem device */
|
|
unsigned char mem_type; /* 2 Key Byte / Fundamental mem type */
|
|
unsigned char module_type; /* 3 Key Byte / Module Type */
|
|
unsigned char density_banks; /* 4 SDRAM Density and Banks */
|
|
unsigned char addressing; /* 5 SDRAM Addressing */
|
|
unsigned char module_vdd; /* 6 Module nominal voltage, VDD */
|
|
unsigned char organization; /* 7 Module Organization */
|
|
unsigned char bus_width; /* 8 Module Memory Bus Width */
|
|
unsigned char ftb_div; /* 9 Fine Timebase (FTB)
|
|
Dividend / Divisor */
|
|
unsigned char mtb_dividend; /* 10 Medium Timebase (MTB) Dividend */
|
|
unsigned char mtb_divisor; /* 11 Medium Timebase (MTB) Divisor */
|
|
unsigned char tCK_min; /* 12 SDRAM Minimum Cycle Time */
|
|
unsigned char res_13; /* 13 Reserved */
|
|
unsigned char caslat_lsb; /* 14 CAS Latencies Supported,
|
|
Least Significant Byte */
|
|
unsigned char caslat_msb; /* 15 CAS Latencies Supported,
|
|
Most Significant Byte */
|
|
unsigned char tAA_min; /* 16 Min CAS Latency Time */
|
|
unsigned char tWR_min; /* 17 Min Write REcovery Time */
|
|
unsigned char tRCD_min; /* 18 Min RAS# to CAS# Delay Time */
|
|
unsigned char tRRD_min; /* 19 Min Row Active to
|
|
Row Active Delay Time */
|
|
unsigned char tRP_min; /* 20 Min Row Precharge Delay Time */
|
|
unsigned char tRAS_tRC_ext; /* 21 Upper Nibbles for tRAS and tRC */
|
|
unsigned char tRAS_min_lsb; /* 22 Min Active to Precharge
|
|
Delay Time */
|
|
unsigned char tRC_min_lsb; /* 23 Min Active to Active/Refresh
|
|
Delay Time, LSB */
|
|
unsigned char tRFC_min_lsb; /* 24 Min Refresh Recovery Delay Time */
|
|
unsigned char tRFC_min_msb; /* 25 Min Refresh Recovery Delay Time */
|
|
unsigned char tWTR_min; /* 26 Min Internal Write to
|
|
Read Command Delay Time */
|
|
unsigned char tRTP_min; /* 27 Min Internal Read to Precharge
|
|
Command Delay Time */
|
|
unsigned char tFAW_msb; /* 28 Upper Nibble for tFAW */
|
|
unsigned char tFAW_min; /* 29 Min Four Activate Window
|
|
Delay Time*/
|
|
unsigned char opt_features; /* 30 SDRAM Optional Features */
|
|
unsigned char therm_ref_opt; /* 31 SDRAM Thermal and Refresh Opts */
|
|
unsigned char therm_sensor; /* 32 Module Thermal Sensor */
|
|
unsigned char device_type; /* 33 SDRAM device type */
|
|
int8_t fine_tCK_min; /* 34 Fine offset for tCKmin */
|
|
int8_t fine_tAA_min; /* 35 Fine offset for tAAmin */
|
|
int8_t fine_tRCD_min; /* 36 Fine offset for tRCDmin */
|
|
int8_t fine_tRP_min; /* 37 Fine offset for tRPmin */
|
|
int8_t fine_tRC_min; /* 38 Fine offset for tRCmin */
|
|
unsigned char res_39_59[21]; /* 39-59 Reserved, General Section */
|
|
|
|
/* Module-Specific Section: Bytes 60-116 */
|
|
union {
|
|
struct {
|
|
/* 60 (Unbuffered) Module Nominal Height */
|
|
unsigned char mod_height;
|
|
/* 61 (Unbuffered) Module Maximum Thickness */
|
|
unsigned char mod_thickness;
|
|
/* 62 (Unbuffered) Reference Raw Card Used */
|
|
unsigned char ref_raw_card;
|
|
/* 63 (Unbuffered) Address Mapping from
|
|
Edge Connector to DRAM */
|
|
unsigned char addr_mapping;
|
|
/* 64-116 (Unbuffered) Reserved */
|
|
unsigned char res_64_116[53];
|
|
} unbuffered;
|
|
struct {
|
|
/* 60 (Registered) Module Nominal Height */
|
|
unsigned char mod_height;
|
|
/* 61 (Registered) Module Maximum Thickness */
|
|
unsigned char mod_thickness;
|
|
/* 62 (Registered) Reference Raw Card Used */
|
|
unsigned char ref_raw_card;
|
|
/* 63 DIMM Module Attributes */
|
|
unsigned char modu_attr;
|
|
/* 64 RDIMM Thermal Heat Spreader Solution */
|
|
unsigned char thermal;
|
|
/* 65 Register Manufacturer ID Code, Least Significant Byte */
|
|
unsigned char reg_id_lo;
|
|
/* 66 Register Manufacturer ID Code, Most Significant Byte */
|
|
unsigned char reg_id_hi;
|
|
/* 67 Register Revision Number */
|
|
unsigned char reg_rev;
|
|
/* 68 Register Type */
|
|
unsigned char reg_type;
|
|
/* 69-76 RC1,3,5...15 (MS Nibble) / RC0,2,4...14 (LS Nibble) */
|
|
unsigned char rcw[8];
|
|
} registered;
|
|
unsigned char uc[57]; /* 60-116 Module-Specific Section */
|
|
} mod_section;
|
|
|
|
/* Unique Module ID: Bytes 117-125 */
|
|
unsigned char mmid_lsb; /* 117 Module MfgID Code LSB - JEP-106 */
|
|
unsigned char mmid_msb; /* 118 Module MfgID Code MSB - JEP-106 */
|
|
unsigned char mloc; /* 119 Mfg Location */
|
|
unsigned char mdate[2]; /* 120-121 Mfg Date */
|
|
unsigned char sernum[4]; /* 122-125 Module Serial Number */
|
|
|
|
/* CRC: Bytes 126-127 */
|
|
unsigned char crc[2]; /* 126-127 SPD CRC */
|
|
|
|
/* Other Manufacturer Fields and User Space: Bytes 128-255 */
|
|
unsigned char mpart[18]; /* 128-145 Mfg's Module Part Number */
|
|
unsigned char mrev[2]; /* 146-147 Module Revision Code */
|
|
|
|
unsigned char dmid_lsb; /* 148 DRAM MfgID Code LSB - JEP-106 */
|
|
unsigned char dmid_msb; /* 149 DRAM MfgID Code MSB - JEP-106 */
|
|
|
|
unsigned char msd[26]; /* 150-175 Mfg's Specific Data */
|
|
unsigned char cust[80]; /* 176-255 Open for Customer Use */
|
|
|
|
} ddr3_spd_eeprom_t;
|
|
|
|
extern unsigned int ddr1_spd_check(const ddr1_spd_eeprom_t *spd);
|
|
extern void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd);
|
|
extern unsigned int ddr2_spd_check(const ddr2_spd_eeprom_t *spd);
|
|
extern void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd);
|
|
extern unsigned int ddr3_spd_check(const ddr3_spd_eeprom_t *spd);
|
|
|
|
/*
|
|
* Byte 2 Fundamental Memory Types.
|
|
*/
|
|
#define SPD_MEMTYPE_FPM (0x01)
|
|
#define SPD_MEMTYPE_EDO (0x02)
|
|
#define SPD_MEMTYPE_PIPE_NIBBLE (0x03)
|
|
#define SPD_MEMTYPE_SDRAM (0x04)
|
|
#define SPD_MEMTYPE_ROM (0x05)
|
|
#define SPD_MEMTYPE_SGRAM (0x06)
|
|
#define SPD_MEMTYPE_DDR (0x07)
|
|
#define SPD_MEMTYPE_DDR2 (0x08)
|
|
#define SPD_MEMTYPE_DDR2_FBDIMM (0x09)
|
|
#define SPD_MEMTYPE_DDR2_FBDIMM_PROBE (0x0A)
|
|
#define SPD_MEMTYPE_DDR3 (0x0B)
|
|
|
|
/* DIMM Type for DDR2 SPD (according to v1.3) */
|
|
#define DDR2_SPD_DIMMTYPE_UNDEFINED (0x00)
|
|
#define DDR2_SPD_DIMMTYPE_RDIMM (0x01)
|
|
#define DDR2_SPD_DIMMTYPE_UDIMM (0x02)
|
|
#define DDR2_SPD_DIMMTYPE_SO_DIMM (0x04)
|
|
#define DDR2_SPD_DIMMTYPE_72B_SO_CDIMM (0x06)
|
|
#define DDR2_SPD_DIMMTYPE_72B_SO_RDIMM (0x07)
|
|
#define DDR2_SPD_DIMMTYPE_MICRO_DIMM (0x08)
|
|
#define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10)
|
|
#define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20)
|
|
|
|
/* Byte 3 Key Byte / Module Type for DDR3 SPD */
|
|
#define DDR3_SPD_MODULETYPE_MASK (0x0f)
|
|
#define DDR3_SPD_MODULETYPE_RDIMM (0x01)
|
|
#define DDR3_SPD_MODULETYPE_UDIMM (0x02)
|
|
#define DDR3_SPD_MODULETYPE_SO_DIMM (0x03)
|
|
#define DDR3_SPD_MODULETYPE_MICRO_DIMM (0x04)
|
|
#define DDR3_SPD_MODULETYPE_MINI_RDIMM (0x05)
|
|
#define DDR3_SPD_MODULETYPE_MINI_UDIMM (0x06)
|
|
#define DDR3_SPD_MODULETYPE_MINI_CDIMM (0x07)
|
|
#define DDR3_SPD_MODULETYPE_72B_SO_UDIMM (0x08)
|
|
#define DDR3_SPD_MODULETYPE_72B_SO_RDIMM (0x09)
|
|
#define DDR3_SPD_MODULETYPE_72B_SO_CDIMM (0x0A)
|
|
#define DDR3_SPD_MODULETYPE_LRDIMM (0x0B)
|
|
#define DDR3_SPD_MODULETYPE_16B_SO_DIMM (0x0C)
|
|
#define DDR3_SPD_MODULETYPE_32B_SO_DIMM (0x0D)
|
|
|
|
#endif /* _DDR_SPD_H_ */
|