mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
29caf9305b
Globally replace all occurances of WATCHDOG_RESET() with schedule(), which handles the HW_WATCHDOG functionality and the cyclic infrastructure. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
246 lines
5.2 KiB
C
246 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* UART driver for MediaTek MT7620 and earlier SoCs
|
|
*
|
|
* Copyright (C) 2020 MediaTek Inc.
|
|
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <div64.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <reset.h>
|
|
#include <serial.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <asm/types.h>
|
|
#include <asm/addrspace.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/err.h>
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
#include <dt-structs.h>
|
|
#endif
|
|
|
|
struct mt7620_serial_regs {
|
|
u32 rbr;
|
|
u32 thr;
|
|
u32 ier;
|
|
u32 iir;
|
|
u32 fcr;
|
|
u32 lcr;
|
|
u32 mcr;
|
|
u32 lsr;
|
|
u32 msr;
|
|
u32 scratch;
|
|
u32 dl;
|
|
u32 dll;
|
|
u32 dlm;
|
|
u32 ifctl;
|
|
};
|
|
|
|
#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
|
|
|
|
#define UART_LSR_DR 0x01 /* Data ready */
|
|
#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
|
|
#define UART_LSR_TEMT 0x40 /* Xmitter empty */
|
|
|
|
#define UART_MCR_DTR 0x01 /* DTR */
|
|
#define UART_MCR_RTS 0x02 /* RTS */
|
|
|
|
#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
|
|
#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
|
|
#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
|
|
|
|
#define UART_MCRVAL (UART_MCR_DTR | \
|
|
UART_MCR_RTS)
|
|
|
|
/* Clear & enable FIFOs */
|
|
#define UART_FCRVAL (UART_FCR_FIFO_EN | \
|
|
UART_FCR_RXSR | \
|
|
UART_FCR_TXSR)
|
|
|
|
struct mt7620_serial_plat {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_serial_mt7620 dtplat;
|
|
#endif
|
|
|
|
struct mt7620_serial_regs __iomem *regs;
|
|
u32 clock;
|
|
};
|
|
|
|
static void _mt7620_serial_setbrg(struct mt7620_serial_plat *plat, int baud)
|
|
{
|
|
u32 quot;
|
|
|
|
/* set divisor */
|
|
quot = DIV_ROUND_CLOSEST(plat->clock, 16 * baud);
|
|
writel(quot, &plat->regs->dl);
|
|
|
|
/* set character length and stop bits */
|
|
writel(UART_LCR_WLS_8, &plat->regs->lcr);
|
|
}
|
|
|
|
static int mt7620_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
_mt7620_serial_setbrg(plat, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7620_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
if (!(readl(&plat->regs->lsr) & UART_LSR_THRE))
|
|
return -EAGAIN;
|
|
|
|
writel(ch, &plat->regs->thr);
|
|
|
|
if (ch == '\n')
|
|
schedule();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7620_serial_getc(struct udevice *dev)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
if (!(readl(&plat->regs->lsr) & UART_LSR_DR))
|
|
return -EAGAIN;
|
|
|
|
return readl(&plat->regs->rbr);
|
|
}
|
|
|
|
static int mt7620_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
if (input)
|
|
return (readl(&plat->regs->lsr) & UART_LSR_DR) ? 1 : 0;
|
|
|
|
return (readl(&plat->regs->lsr) & UART_LSR_THRE) ? 0 : 1;
|
|
}
|
|
|
|
static int mt7620_serial_probe(struct udevice *dev)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
plat->regs = (void __iomem *)KSEG1ADDR(plat->dtplat.reg[0]);
|
|
plat->clock = plat->dtplat.clock_frequency;
|
|
#endif
|
|
|
|
/* Disable interrupt */
|
|
writel(0, &plat->regs->ier);
|
|
|
|
writel(UART_MCRVAL, &plat->regs->mcr);
|
|
writel(UART_FCRVAL, &plat->regs->fcr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
static int mt7620_serial_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
struct reset_ctl reset_uart;
|
|
struct clk clk;
|
|
int err;
|
|
|
|
err = reset_get_by_index(dev, 0, &reset_uart);
|
|
if (!err)
|
|
reset_deassert(&reset_uart);
|
|
|
|
plat->regs = dev_remap_addr_index(dev, 0);
|
|
if (!plat->regs) {
|
|
dev_err(dev, "mt7620_serial: unable to map UART registers\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = clk_get_by_index(dev, 0, &clk);
|
|
if (!err) {
|
|
err = clk_get_rate(&clk);
|
|
if (!IS_ERR_VALUE(err))
|
|
plat->clock = err;
|
|
} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
|
|
dev_err(dev, "mt7620_serial: failed to get clock\n");
|
|
return err;
|
|
}
|
|
|
|
if (!plat->clock)
|
|
plat->clock = dev_read_u32_default(dev, "clock-frequency", 0);
|
|
|
|
if (!plat->clock) {
|
|
dev_err(dev, "mt7620_serial: clock not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mt7620_serial_ids[] = {
|
|
{ .compatible = "mediatek,mt7620-uart" },
|
|
{ }
|
|
};
|
|
#endif
|
|
|
|
static const struct dm_serial_ops mt7620_serial_ops = {
|
|
.putc = mt7620_serial_putc,
|
|
.pending = mt7620_serial_pending,
|
|
.getc = mt7620_serial_getc,
|
|
.setbrg = mt7620_serial_setbrg,
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_mt7620) = {
|
|
.name = "serial_mt7620",
|
|
.id = UCLASS_SERIAL,
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
.of_match = mt7620_serial_ids,
|
|
.of_to_plat = mt7620_serial_of_to_plat,
|
|
#endif
|
|
.plat_auto = sizeof(struct mt7620_serial_plat),
|
|
.probe = mt7620_serial_probe,
|
|
.ops = &mt7620_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
|
|
DM_DRIVER_ALIAS(serial_mt7620, mediatek_mt7620_uart);
|
|
|
|
#ifdef CONFIG_DEBUG_UART_MT7620
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct mt7620_serial_plat plat;
|
|
|
|
plat.regs = (void *)CONFIG_VAL(DEBUG_UART_BASE);
|
|
plat.clock = CONFIG_DEBUG_UART_CLOCK;
|
|
|
|
writel(0, &plat.regs->ier);
|
|
writel(UART_MCRVAL, &plat.regs->mcr);
|
|
writel(UART_FCRVAL, &plat.regs->fcr);
|
|
|
|
_mt7620_serial_setbrg(&plat, CONFIG_BAUDRATE);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct mt7620_serial_regs __iomem *regs =
|
|
(void *)CONFIG_VAL(DEBUG_UART_BASE);
|
|
|
|
while (!(readl(®s->lsr) & UART_LSR_THRE))
|
|
;
|
|
|
|
writel(ch, ®s->thr);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|