mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
cc25f346c9
The pwm_sifive_set_config() and pwm_sifive_set_enable() cannot work properly due to the wrong implementations. It will cause the u-boot PWM command to not work as expected. The bugs will be resolved in this patch. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
174 lines
4.8 KiB
C
174 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2020 SiFive, Inc
|
|
* For SiFive's PWM IP block documentation please refer Chapter 14 of
|
|
* Reference Manual : https://static.dev.sifive.com/FU540-C000-v1.0.pdf
|
|
*
|
|
* Limitations:
|
|
* - When changing both duty cycle and period, we cannot prevent in
|
|
* software that the output might produce a period with mixed
|
|
* settings (new period length and old duty cycle).
|
|
* - The hardware cannot generate a 100% duty cycle.
|
|
* - The hardware generates only inverted output.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <div64.h>
|
|
#include <dm.h>
|
|
#include <pwm.h>
|
|
#include <regmap.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/io.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
/* PWMCFG fields */
|
|
#define PWM_SIFIVE_PWMCFG_SCALE GENMASK(3, 0)
|
|
#define PWM_SIFIVE_PWMCFG_STICKY BIT(8)
|
|
#define PWM_SIFIVE_PWMCFG_ZERO_CMP BIT(9)
|
|
#define PWM_SIFIVE_PWMCFG_DEGLITCH BIT(10)
|
|
#define PWM_SIFIVE_PWMCFG_EN_ALWAYS BIT(12)
|
|
#define PWM_SIFIVE_PWMCFG_EN_ONCE BIT(13)
|
|
#define PWM_SIFIVE_PWMCFG_CENTER BIT(16)
|
|
#define PWM_SIFIVE_PWMCFG_GANG BIT(24)
|
|
#define PWM_SIFIVE_PWMCFG_IP BIT(28)
|
|
|
|
/* PWM_SIFIVE_SIZE_PWMCMP is used to calculate offset for pwmcmpX registers */
|
|
#define PWM_SIFIVE_SIZE_PWMCMP 4
|
|
#define PWM_SIFIVE_CMPWIDTH 16
|
|
|
|
#define PWM_SIFIVE_CHANNEL_ENABLE_VAL 0
|
|
#define PWM_SIFIVE_CHANNEL_DISABLE_VAL 0xffff
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct pwm_sifive_regs {
|
|
unsigned long cfg;
|
|
unsigned long cnt;
|
|
unsigned long pwms;
|
|
unsigned long cmp0;
|
|
};
|
|
|
|
struct pwm_sifive_data {
|
|
struct pwm_sifive_regs regs;
|
|
};
|
|
|
|
struct pwm_sifive_priv {
|
|
void __iomem *base;
|
|
ulong freq;
|
|
const struct pwm_sifive_data *data;
|
|
};
|
|
|
|
static int pwm_sifive_set_config(struct udevice *dev, uint channel,
|
|
uint period_ns, uint duty_ns)
|
|
{
|
|
struct pwm_sifive_priv *priv = dev_get_priv(dev);
|
|
const struct pwm_sifive_regs *regs = &priv->data->regs;
|
|
unsigned long scale_pow;
|
|
unsigned long long num;
|
|
u32 scale, val = 0, frac;
|
|
|
|
debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns);
|
|
|
|
/*
|
|
* The PWM unit is used with pwmzerocmp=0, so the only way to modify the
|
|
* period length is using pwmscale which provides the number of bits the
|
|
* counter is shifted before being feed to the comparators. A period
|
|
* lasts (1 << (PWM_SIFIVE_CMPWIDTH + pwmscale)) clock ticks.
|
|
* (1 << (PWM_SIFIVE_CMPWIDTH + scale)) * 10^9/rate = period
|
|
*/
|
|
scale_pow = lldiv((uint64_t)priv->freq * period_ns, 1000000000);
|
|
scale = clamp(ilog2(scale_pow) - PWM_SIFIVE_CMPWIDTH, 0, 0xf);
|
|
val |= (FIELD_PREP(PWM_SIFIVE_PWMCFG_SCALE, scale) | PWM_SIFIVE_PWMCFG_EN_ALWAYS);
|
|
|
|
/*
|
|
* The problem of output producing mixed setting as mentioned at top,
|
|
* occurs here. To minimize the window for this problem, we are
|
|
* calculating the register values first and then writing them
|
|
* consecutively
|
|
*/
|
|
num = (u64)duty_ns * (1U << PWM_SIFIVE_CMPWIDTH);
|
|
frac = DIV_ROUND_CLOSEST_ULL(num, period_ns);
|
|
frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
|
|
frac = (1U << PWM_SIFIVE_CMPWIDTH) - 1 - frac;
|
|
|
|
writel(val, priv->base + regs->cfg);
|
|
writel(frac, priv->base + regs->cmp0 + channel *
|
|
PWM_SIFIVE_SIZE_PWMCMP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_sifive_set_enable(struct udevice *dev, uint channel, bool enable)
|
|
{
|
|
struct pwm_sifive_priv *priv = dev_get_priv(dev);
|
|
const struct pwm_sifive_regs *regs = &priv->data->regs;
|
|
|
|
debug("%s: Enable '%s'\n", __func__, dev->name);
|
|
|
|
if (enable)
|
|
writel(PWM_SIFIVE_CHANNEL_ENABLE_VAL, priv->base +
|
|
regs->cmp0 + channel * PWM_SIFIVE_SIZE_PWMCMP);
|
|
else
|
|
writel(PWM_SIFIVE_CHANNEL_DISABLE_VAL, priv->base +
|
|
regs->cmp0 + channel * PWM_SIFIVE_SIZE_PWMCMP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_sifive_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct pwm_sifive_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->base = dev_read_addr_ptr(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_sifive_probe(struct udevice *dev)
|
|
{
|
|
struct pwm_sifive_priv *priv = dev_get_priv(dev);
|
|
struct clk clk;
|
|
int ret = 0;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0) {
|
|
debug("%s get clock fail!\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->freq = clk_get_rate(&clk);
|
|
priv->data = (struct pwm_sifive_data *)dev_get_driver_data(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops pwm_sifive_ops = {
|
|
.set_config = pwm_sifive_set_config,
|
|
.set_enable = pwm_sifive_set_enable,
|
|
};
|
|
|
|
static const struct pwm_sifive_data pwm_data = {
|
|
.regs = {
|
|
.cfg = 0x00,
|
|
.cnt = 0x08,
|
|
.pwms = 0x10,
|
|
.cmp0 = 0x20,
|
|
},
|
|
};
|
|
|
|
static const struct udevice_id pwm_sifive_ids[] = {
|
|
{ .compatible = "sifive,pwm0", .data = (ulong)&pwm_data},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pwm_sifive) = {
|
|
.name = "pwm_sifive",
|
|
.id = UCLASS_PWM,
|
|
.of_match = pwm_sifive_ids,
|
|
.ops = &pwm_sifive_ops,
|
|
.of_to_plat = pwm_sifive_of_to_plat,
|
|
.probe = pwm_sifive_probe,
|
|
.priv_auto = sizeof(struct pwm_sifive_priv),
|
|
};
|