mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
8d7b3638e9
As the cs for spi is worked in gpio mode, so no need to configure it as peripheral and then configure to gpio. Configure it to gpio directly. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
295 lines
7.4 KiB
C
295 lines
7.4 KiB
C
/*
|
|
* Copyright (C) 2012 Atmel Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/at91sam9x5_matrix.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <lcd.h>
|
|
#include <atmel_hlcdc.h>
|
|
#include <atmel_mci.h>
|
|
#ifdef CONFIG_MACB
|
|
#include <net.h>
|
|
#endif
|
|
#include <netdev.h>
|
|
#ifdef CONFIG_LCD_INFO
|
|
#include <nand.h>
|
|
#include <version.h>
|
|
#endif
|
|
#ifdef CONFIG_ATMEL_SPI
|
|
#include <spi.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/*
|
|
* Miscelaneous platform dependent initialisations
|
|
*/
|
|
#ifdef CONFIG_CMD_NAND
|
|
static void at91sam9x5ek_nand_hw_init(void)
|
|
{
|
|
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
|
|
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
unsigned long csa;
|
|
|
|
/* Enable CS3 */
|
|
csa = readl(&matrix->ebicsa);
|
|
csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
|
|
/* NAND flash on D16 */
|
|
csa |= AT91_MATRIX_NFD0_ON_D16;
|
|
|
|
/* Configure IO drive */
|
|
csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
|
|
|
|
writel(csa, &matrix->ebicsa);
|
|
|
|
/* Configure SMC CS3 for NAND/SmartMedia */
|
|
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
|
|
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
|
|
&smc->cs[3].setup);
|
|
writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
|
|
AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6),
|
|
&smc->cs[3].pulse);
|
|
writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(6),
|
|
&smc->cs[3].cycle);
|
|
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
|
AT91_SMC_MODE_EXNW_DISABLE |
|
|
#ifdef CONFIG_SYS_NAND_DBW_16
|
|
AT91_SMC_MODE_DBW_16 |
|
|
#else /* CONFIG_SYS_NAND_DBW_8 */
|
|
AT91_SMC_MODE_DBW_8 |
|
|
#endif
|
|
AT91_SMC_MODE_TDF_CYCLE(1),
|
|
&smc->cs[3].mode);
|
|
|
|
writel(1 << ATMEL_ID_PIOCD, &pmc->pcer);
|
|
|
|
/* Configure RDY/BSY */
|
|
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
|
|
/* Enable NandFlash */
|
|
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 6, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTD, 7, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTD, 9, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTD, 10, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTD, 11, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTD, 12, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTD, 13, 1);
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
|
|
#ifdef CONFIG_MACB
|
|
if (has_emac0())
|
|
rc = macb_eth_initialize(0,
|
|
(void *)ATMEL_BASE_EMAC0, 0x00);
|
|
if (has_emac1())
|
|
rc = macb_eth_initialize(1,
|
|
(void *)ATMEL_BASE_EMAC1, 0x00);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_LCD
|
|
vidinfo_t panel_info = {
|
|
.vl_col = 800,
|
|
.vl_row = 480,
|
|
.vl_clk = 24000000,
|
|
.vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
|
|
.vl_bpix = LCD_BPP,
|
|
.vl_tft = 1,
|
|
.vl_clk_pol = 1,
|
|
.vl_hsync_len = 128,
|
|
.vl_left_margin = 64,
|
|
.vl_right_margin = 64,
|
|
.vl_vsync_len = 2,
|
|
.vl_upper_margin = 22,
|
|
.vl_lower_margin = 21,
|
|
.mmio = ATMEL_BASE_LCDC,
|
|
};
|
|
|
|
void lcd_enable(void)
|
|
{
|
|
if (has_lcdc())
|
|
at91_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
|
|
}
|
|
|
|
void lcd_disable(void)
|
|
{
|
|
if (has_lcdc())
|
|
at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
|
|
}
|
|
|
|
static void at91sam9x5ek_lcd_hw_init(void)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
|
if (has_lcdc()) {
|
|
at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
|
|
|
|
writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_LCD_INFO
|
|
void lcd_show_board_info(void)
|
|
{
|
|
ulong dram_size, nand_size;
|
|
int i;
|
|
char temp[32];
|
|
|
|
if (has_lcdc()) {
|
|
lcd_printf("%s\n", U_BOOT_VERSION);
|
|
lcd_printf("(C) 2012 ATMEL Corp\n");
|
|
lcd_printf("at91support@atmel.com\n");
|
|
lcd_printf("%s CPU at %s MHz\n",
|
|
get_cpu_name(),
|
|
strmhz(temp, get_cpu_clk_rate()));
|
|
|
|
dram_size = 0;
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
|
|
dram_size += gd->bd->bi_dram[i].size;
|
|
nand_size = 0;
|
|
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
|
|
nand_size += nand_info[i].size;
|
|
lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
|
|
dram_size >> 20,
|
|
nand_size >> 20);
|
|
}
|
|
}
|
|
#endif /* CONFIG_LCD_INFO */
|
|
#endif /* CONFIG_LCD */
|
|
|
|
/* SPI chip select control */
|
|
#ifdef CONFIG_ATMEL_SPI
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && cs < 2;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
switch (slave->cs) {
|
|
case 1:
|
|
at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
|
|
break;
|
|
case 0:
|
|
default:
|
|
at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
switch (slave->cs) {
|
|
case 1:
|
|
at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
|
|
break;
|
|
case 0:
|
|
default:
|
|
at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
|
|
break;
|
|
}
|
|
}
|
|
#endif /* CONFIG_ATMEL_SPI */
|
|
|
|
#ifdef CONFIG_GENERIC_ATMEL_MCI
|
|
int board_mmc_init(bd_t *bd)
|
|
{
|
|
at91_mci_hw_init();
|
|
|
|
return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
at91_seriald_hw_init();
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* arch number of AT91SAM9X5EK-Board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
at91sam9x5ek_nand_hw_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_ATMEL_SPI
|
|
at91_spi0_hw_init(1 << 4);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
at91_macb_hw_init();
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI)
|
|
at91_uhp_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_LCD
|
|
at91sam9x5ek_lcd_hw_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
return 0;
|
|
}
|