mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
399e2bb60c
When U-Boot boots from EL2, skip some lowlevel init code requiring EL3, including CCI-400/CCN-504, trust zone, GIC, etc. These initialization tasks are carried out before U-Boot runs. This applies to the RAM version image used for SPL boot if PPA is loaded first. Signed-off-by: York Sun <york.sun@nxp.com>
280 lines
7 KiB
C
280 lines
7 KiB
C
/*
|
|
* Copyright 2016 NXP Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/types.h>
|
|
#include <asm/macro.h>
|
|
#include <asm/armv8/sec_firmware.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
extern void c_runtime_cpu_setup(void);
|
|
|
|
#define SEC_FIRMWARE_LOADED 0x1
|
|
#define SEC_FIRMWARE_RUNNING 0x2
|
|
#define SEC_FIRMWARE_ADDR_MASK (~0x3)
|
|
/*
|
|
* Secure firmware load addr
|
|
* Flags used: 0x1 secure firmware has been loaded to secure memory
|
|
* 0x2 secure firmware is running
|
|
*/
|
|
phys_addr_t sec_firmware_addr;
|
|
|
|
#ifndef SEC_FIRMWARE_FIT_IMAGE
|
|
#define SEC_FIRMWARE_FIT_IMAGE "firmware"
|
|
#endif
|
|
#ifndef SEC_FIRMEWARE_FIT_CNF_NAME
|
|
#define SEC_FIRMEWARE_FIT_CNF_NAME "config@1"
|
|
#endif
|
|
#ifndef SEC_FIRMWARE_TARGET_EL
|
|
#define SEC_FIRMWARE_TARGET_EL 2
|
|
#endif
|
|
|
|
static int sec_firmware_get_data(const void *sec_firmware_img,
|
|
const void **data, size_t *size)
|
|
{
|
|
int conf_node_off, fw_node_off;
|
|
char *conf_node_name = NULL;
|
|
char *desc;
|
|
int ret;
|
|
|
|
conf_node_name = SEC_FIRMEWARE_FIT_CNF_NAME;
|
|
|
|
conf_node_off = fit_conf_get_node(sec_firmware_img, conf_node_name);
|
|
if (conf_node_off < 0) {
|
|
printf("SEC Firmware: %s: no such config\n", conf_node_name);
|
|
return -ENOENT;
|
|
}
|
|
|
|
fw_node_off = fit_conf_get_prop_node(sec_firmware_img, conf_node_off,
|
|
SEC_FIRMWARE_FIT_IMAGE);
|
|
if (fw_node_off < 0) {
|
|
printf("SEC Firmware: No '%s' in config\n",
|
|
SEC_FIRMWARE_FIT_IMAGE);
|
|
return -ENOLINK;
|
|
}
|
|
|
|
/* Verify secure firmware image */
|
|
if (!(fit_image_verify(sec_firmware_img, fw_node_off))) {
|
|
printf("SEC Firmware: Bad firmware image (bad CRC)\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fit_image_get_data(sec_firmware_img, fw_node_off, data, size)) {
|
|
printf("SEC Firmware: Can't get %s subimage data/size",
|
|
SEC_FIRMWARE_FIT_IMAGE);
|
|
return -ENOENT;
|
|
}
|
|
|
|
ret = fit_get_desc(sec_firmware_img, fw_node_off, &desc);
|
|
if (ret)
|
|
printf("SEC Firmware: Can't get description\n");
|
|
else
|
|
printf("%s\n", desc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* SEC Firmware FIT image parser checks if the image is in FIT
|
|
* format, verifies integrity of the image and calculates raw
|
|
* image address and size values.
|
|
*
|
|
* Returns 0 on success and a negative errno on error task fail.
|
|
*/
|
|
static int sec_firmware_parse_image(const void *sec_firmware_img,
|
|
const void **raw_image_addr,
|
|
size_t *raw_image_size)
|
|
{
|
|
int ret;
|
|
|
|
ret = sec_firmware_get_data(sec_firmware_img, raw_image_addr,
|
|
raw_image_size);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug("SEC Firmware: raw_image_addr = 0x%p, raw_image_size = 0x%lx\n",
|
|
*raw_image_addr, *raw_image_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sec_firmware_copy_image(const char *title,
|
|
u64 image_addr, u32 image_size, u64 sec_firmware)
|
|
{
|
|
debug("%s copied to address 0x%p\n", title, (void *)sec_firmware);
|
|
memcpy((void *)sec_firmware, (void *)image_addr, image_size);
|
|
flush_dcache_range(sec_firmware, sec_firmware + image_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function will parse the SEC Firmware image, and then load it
|
|
* to secure memory.
|
|
*/
|
|
static int sec_firmware_load_image(const void *sec_firmware_img)
|
|
{
|
|
const void *raw_image_addr;
|
|
size_t raw_image_size = 0;
|
|
int ret;
|
|
|
|
/*
|
|
* The Excetpion Level must be EL3 to load and initialize
|
|
* the SEC Firmware.
|
|
*/
|
|
if (current_el() != 3) {
|
|
ret = -EACCES;
|
|
goto out;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
|
|
/*
|
|
* The SEC Firmware must be stored in secure memory.
|
|
* Append SEC Firmware to secure mmu table.
|
|
*/
|
|
if (!(gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED)) {
|
|
ret = -ENXIO;
|
|
goto out;
|
|
}
|
|
|
|
sec_firmware_addr = (gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK) +
|
|
gd->arch.tlb_size;
|
|
#else
|
|
#error "The CONFIG_SYS_MEM_RESERVE_SECURE must be defined when enabled SEC Firmware support"
|
|
#endif
|
|
|
|
/* Align SEC Firmware base address to 4K */
|
|
sec_firmware_addr = (sec_firmware_addr + 0xfff) & ~0xfff;
|
|
debug("SEC Firmware: Load address: 0x%llx\n",
|
|
sec_firmware_addr & SEC_FIRMWARE_ADDR_MASK);
|
|
|
|
ret = sec_firmware_parse_image(sec_firmware_img, &raw_image_addr,
|
|
&raw_image_size);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* TODO:
|
|
* Check if the end addr of SEC Firmware has been extend the secure
|
|
* memory.
|
|
*/
|
|
|
|
/* Copy the secure firmware to secure memory */
|
|
ret = sec_firmware_copy_image("SEC Firmware", (u64)raw_image_addr,
|
|
raw_image_size, sec_firmware_addr &
|
|
SEC_FIRMWARE_ADDR_MASK);
|
|
if (ret)
|
|
goto out;
|
|
|
|
sec_firmware_addr |= SEC_FIRMWARE_LOADED;
|
|
debug("SEC Firmware: Entry point: 0x%llx\n",
|
|
sec_firmware_addr & SEC_FIRMWARE_ADDR_MASK);
|
|
|
|
return 0;
|
|
|
|
out:
|
|
printf("SEC Firmware: error (%d)\n", ret);
|
|
sec_firmware_addr = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sec_firmware_entry(u32 *eret_hold_l, u32 *eret_hold_h)
|
|
{
|
|
const void *entry = (void *)(sec_firmware_addr &
|
|
SEC_FIRMWARE_ADDR_MASK);
|
|
|
|
return _sec_firmware_entry(entry, eret_hold_l, eret_hold_h);
|
|
}
|
|
|
|
/* Check the secure firmware FIT image */
|
|
__weak bool sec_firmware_is_valid(const void *sec_firmware_img)
|
|
{
|
|
if (fdt_check_header(sec_firmware_img)) {
|
|
printf("SEC Firmware: Bad firmware image (not a FIT image)\n");
|
|
return false;
|
|
}
|
|
|
|
if (!fit_check_format(sec_firmware_img)) {
|
|
printf("SEC Firmware: Bad firmware image (bad FIT header)\n");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
#ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI
|
|
/*
|
|
* The PSCI_VERSION function is added from PSCI v0.2. When the PSCI
|
|
* v0.1 received this function, the NOT_SUPPORTED (0xffff_ffff) error
|
|
* number will be returned according to SMC Calling Conventions. But
|
|
* when getting the NOT_SUPPORTED error number, we cannot ensure if
|
|
* the PSCI version is v0.1 or other error occurred. So, PSCI v0.1
|
|
* won't be supported by this framework.
|
|
* And if the secure firmware isn't running, return NOT_SUPPORTED.
|
|
*
|
|
* The return value on success is PSCI version in format
|
|
* major[31:16]:minor[15:0].
|
|
*/
|
|
unsigned int sec_firmware_support_psci_version(void)
|
|
{
|
|
if (current_el() == SEC_FIRMWARE_TARGET_EL)
|
|
return _sec_firmware_support_psci_version();
|
|
|
|
return PSCI_INVALID_VER;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* sec_firmware_init - Initialize the SEC Firmware
|
|
* @sec_firmware_img: the SEC Firmware image address
|
|
* @eret_hold_l: the address to hold exception return address low
|
|
* @eret_hold_h: the address to hold exception return address high
|
|
*/
|
|
int sec_firmware_init(const void *sec_firmware_img,
|
|
u32 *eret_hold_l,
|
|
u32 *eret_hold_h)
|
|
{
|
|
int ret;
|
|
|
|
if (!sec_firmware_is_valid(sec_firmware_img))
|
|
return -EINVAL;
|
|
|
|
ret = sec_firmware_load_image(sec_firmware_img);
|
|
if (ret) {
|
|
printf("SEC Firmware: Failed to load image\n");
|
|
return ret;
|
|
} else if (sec_firmware_addr & SEC_FIRMWARE_LOADED) {
|
|
ret = sec_firmware_entry(eret_hold_l, eret_hold_h);
|
|
if (ret) {
|
|
printf("SEC Firmware: Failed to initialize\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
debug("SEC Firmware: Return from SEC Firmware: current_el = %d\n",
|
|
current_el());
|
|
|
|
/*
|
|
* The PE will be turned into target EL when returned from
|
|
* SEC Firmware.
|
|
*/
|
|
if (current_el() != SEC_FIRMWARE_TARGET_EL)
|
|
return -EACCES;
|
|
|
|
sec_firmware_addr |= SEC_FIRMWARE_RUNNING;
|
|
|
|
/* Set exception table and enable caches if it isn't EL3 */
|
|
if (current_el() != 3) {
|
|
c_runtime_cpu_setup();
|
|
enable_caches();
|
|
}
|
|
|
|
return 0;
|
|
}
|