mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
00f43e51c5
mx6sabre boards can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the eMMC changes depending on the kernel version. In order to avoid such issue, use UUID method to specify the rootfs location. Succesfully tested booting a NXP 4.1 and also a mainline kernel on a mx6qsabresd and mx6dlsabreauto. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
73 lines
2 KiB
C
73 lines
2 KiB
C
/*
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration settings for the Freescale i.MX6Q SabreSD board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __MX6SABRESD_CONFIG_H
|
|
#define __MX6SABRESD_CONFIG_H
|
|
|
|
#ifdef CONFIG_SPL
|
|
#include "imx6_spl.h"
|
|
#endif
|
|
|
|
#define CONFIG_MACH_TYPE 3980
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
#define CONSOLE_DEV "ttymxc0"
|
|
|
|
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
|
|
|
|
#include "mx6sabre_common.h"
|
|
|
|
/* Falcon Mode */
|
|
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
|
|
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
|
|
#define CONFIG_CMD_SPL
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
|
|
|
|
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
|
#if defined(CONFIG_ENV_IS_IN_MMC)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */
|
|
#endif
|
|
|
|
#define CONFIG_CMD_PCI
|
|
#ifdef CONFIG_CMD_PCI
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_PCIE_IMX
|
|
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
|
|
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19)
|
|
#endif
|
|
|
|
/* I2C Configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* PMIC */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_PFUZE100
|
|
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
|
|
|
|
/* USB Configs */
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
|
|
#endif
|
|
|
|
#endif /* __MX6SABRESD_CONFIG_H */
|