mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
176 lines
4.3 KiB
C
176 lines
4.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2014
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
|
|
#define ADV7611_I2C_ADDR 0x4c
|
|
#define ADV7611_RDINFO 0x2051
|
|
|
|
/*
|
|
* ADV7611 I2C Addresses in u-boot notation
|
|
*/
|
|
enum {
|
|
CP_I2C_ADDR = 0x22,
|
|
DPLL_I2C_ADDR = 0x26,
|
|
KSV_I2C_ADDR = 0x32,
|
|
HDMI_I2C_ADDR = 0x34,
|
|
EDID_I2C_ADDR = 0x36,
|
|
INFOFRAME_I2C_ADDR = 0x3e,
|
|
CEC_I2C_ADDR = 0x40,
|
|
IO_I2C_ADDR = ADV7611_I2C_ADDR,
|
|
};
|
|
|
|
/*
|
|
* Global Control Registers
|
|
*/
|
|
enum {
|
|
IO_RD_INFO_MSB = 0xea,
|
|
IO_RD_INFO_LSB = 0xeb,
|
|
IO_CEC_ADDR = 0xf4,
|
|
IO_INFOFRAME_ADDR = 0xf5,
|
|
IO_DPLL_ADDR = 0xf8,
|
|
IO_KSV_ADDR = 0xf9,
|
|
IO_EDID_ADDR = 0xfa,
|
|
IO_HDMI_ADDR = 0xfb,
|
|
IO_CP_ADDR = 0xfd,
|
|
};
|
|
|
|
int adv7611_i2c[] = CONFIG_SYS_ADV7611_I2C;
|
|
|
|
int adv7611_probe(unsigned int screen)
|
|
{
|
|
int old_bus = i2c_get_bus_num();
|
|
unsigned int rd_info;
|
|
int res = 0;
|
|
|
|
i2c_set_bus_num(adv7611_i2c[screen]);
|
|
|
|
rd_info = (i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_MSB) << 8)
|
|
| i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_LSB);
|
|
|
|
if (rd_info != ADV7611_RDINFO) {
|
|
res = -1;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* set I2C addresses to default values
|
|
*/
|
|
i2c_reg_write(IO_I2C_ADDR, IO_CEC_ADDR, CEC_I2C_ADDR << 1);
|
|
i2c_reg_write(IO_I2C_ADDR, IO_INFOFRAME_ADDR, INFOFRAME_I2C_ADDR << 1);
|
|
i2c_reg_write(IO_I2C_ADDR, IO_DPLL_ADDR, DPLL_I2C_ADDR << 1);
|
|
i2c_reg_write(IO_I2C_ADDR, IO_KSV_ADDR, KSV_I2C_ADDR << 1);
|
|
i2c_reg_write(IO_I2C_ADDR, IO_EDID_ADDR, EDID_I2C_ADDR << 1);
|
|
i2c_reg_write(IO_I2C_ADDR, IO_HDMI_ADDR, HDMI_I2C_ADDR << 1);
|
|
i2c_reg_write(IO_I2C_ADDR, IO_CP_ADDR, CP_I2C_ADDR << 1);
|
|
|
|
/*
|
|
* do magic initialization sequence from
|
|
* "ADV7611 Register Settings Recommendations Revision 1.5"
|
|
* with most registers undocumented
|
|
*/
|
|
i2c_reg_write(CP_I2C_ADDR, 0x6c, 0x00);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x9b, 0x03);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x6f, 0x08);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x85, 0x1f);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x87, 0x70);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x57, 0xda);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x58, 0x01);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x03, 0x98);
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x4c, 0x44);
|
|
|
|
/*
|
|
* IO_REG_02, default 0xf0
|
|
*
|
|
* INP_COLOR_SPACE (IO, Address 0x02[7:4])
|
|
* default: 0b1111 auto
|
|
* set to : 0b0001 force RGB (range 0 to 255) input
|
|
*
|
|
* RGB_OUT (IO, Address 0x02[1])
|
|
* default: 0 YPbPr color space output
|
|
* set to : 1 RGB color space output
|
|
*/
|
|
i2c_reg_write(IO_I2C_ADDR, 0x02, 0x12);
|
|
|
|
/*
|
|
* IO_REG_03, default 0x00
|
|
*
|
|
* OP_FORMAT_SEL (IO, Address 0x03[7:0])
|
|
* default: 0x00 8-bit SDR ITU-656 mode
|
|
* set to : 0x40 24-bit 4:4:4 SDR mode
|
|
*/
|
|
i2c_reg_write(IO_I2C_ADDR, 0x03, 0x40);
|
|
|
|
/*
|
|
* IO_REG_05, default 0x2c
|
|
*
|
|
* AVCODE_INSERT_EN (IO, Address 0x05[2])
|
|
* default: 1 insert AV codes into data stream
|
|
* set to : 0 do not insert AV codes into data stream
|
|
*/
|
|
i2c_reg_write(IO_I2C_ADDR, 0x05, 0x28);
|
|
|
|
/*
|
|
* IO_REG_0C, default 0x62
|
|
*
|
|
* POWER_DOWN (IO, Address 0x0C[5])
|
|
* default: 1 chip is powered down
|
|
* set to : 0 chip is operational
|
|
*/
|
|
i2c_reg_write(IO_I2C_ADDR, 0x0c, 0x42);
|
|
|
|
/*
|
|
* IO_REG_15, default 0xbe
|
|
*
|
|
* TRI_SYNCS (IO, Address 0x15[3)
|
|
* TRI_LLC (IO, Address 0x15[2])
|
|
* TRI_PIX (IO, Address 0x15[1])
|
|
* default: 1 video output pins are tristate
|
|
* set to : 0 video output pins are active
|
|
*/
|
|
i2c_reg_write(IO_I2C_ADDR, 0x15, 0xb0);
|
|
|
|
/*
|
|
* HDMI_REGISTER_02H, default 0xff
|
|
*
|
|
* CLOCK_TERMA_DISABLE (HDMI, Address 0x83[0])
|
|
* default: 1 disable termination
|
|
* set to : 0 enable termination
|
|
* Future options are:
|
|
* - use the chips automatic termination control
|
|
* - set this manually on cable detect
|
|
* but at the moment this seems a safe default.
|
|
*/
|
|
i2c_reg_write(HDMI_I2C_ADDR, 0x83, 0xfe);
|
|
|
|
/*
|
|
* HDMI_CP_CNTRL_1, default 0x01
|
|
*
|
|
* HDMI_FRUN_EN (CP, Address 0xBA[0])
|
|
* default: 1 Enable the free run feature in HDMI mode
|
|
* set to : 0 Disable the free run feature in HDMI mode
|
|
*/
|
|
i2c_reg_write(CP_I2C_ADDR, 0xba, 0x00);
|
|
|
|
/*
|
|
* INT1_CONFIGURATION, default 0x20
|
|
*
|
|
* INTRQ_DUR_SEL[1:0] (IO, Address 0x40[7:6])
|
|
* default: 00 Interrupt signal is active for 4 Xtal periods
|
|
* set to : 11 Active until cleared
|
|
*
|
|
* INTRQ_OP_SEL[1:0] (IO, Address 0x40[1:0])
|
|
* default: 00 Open drain
|
|
* set to : 10 Drives high when active
|
|
*/
|
|
i2c_reg_write(IO_I2C_ADDR, 0x40, 0xc2);
|
|
|
|
out:
|
|
i2c_set_bus_num(old_bus);
|
|
|
|
return res;
|
|
}
|