u-boot/board/compulab/cm_t54/cm_t54.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

259 lines
5.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Board functions for Compulab CM-T54 board
*
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
*
* Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
*/
#include <common.h>
#include <environment.h>
#include <fdt_support.h>
#include <usb.h>
#include <mmc.h>
#include <palmas.h>
#include <spl.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/clock.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
#include "../common/eeprom.h"
#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
#define DIE_ID_REG_OFFSET 0x200
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_SPL_BUILD)
inline void set_muxconf_regs(void){};
#endif
const struct omap_sysinfo sysinfo = {
"Board: CM-T54\n"
};
/*
* Routine: board_init
* Description: hardware init.
*/
int board_init(void)
{
gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
return 0;
}
/*
* Routine: cm_t54_palmas_regulator_set
* Description: select voltage and turn on/off Palmas PMIC regulator.
*/
static int cm_t54_palmas_regulator_set(u8 vreg, u8 vval, u8 creg, u8 cval)
{
int err;
/* Setup voltage */
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, vreg, vval);
if (err) {
printf("cm_t54: could not set regulator 0x%02x voltage : %d\n",
vreg, err);
return err;
}
/* Turn on/off regulator */
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, creg, cval);
if (err) {
printf("cm_t54: could not turn on/off regulator 0x%02x : %d\n",
creg, err);
return err;
}
return 0;
}
/*
* Routine: mmc_get_env_part
* Description: setup environment storage device partition.
*/
#ifdef CONFIG_SYS_MMC_ENV_PART
uint mmc_get_env_part(struct mmc *mmc)
{
u32 bootmode = gd->arch.omap_boot_mode;
uint bootpart = CONFIG_SYS_MMC_ENV_PART;
/*
* If booted from eMMC boot partition then force eMMC
* FIRST boot partition to be env storage
*/
if (bootmode == BOOT_DEVICE_MMC2)
bootpart = 1;
return bootpart;
}
#endif
#if defined(CONFIG_MMC)
#define SB_T54_CD_GPIO 228
#define SB_T54_WP_GPIO 229
int board_mmc_init(bd_t *bis)
{
int ret0, ret1;
ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO);
if (ret0)
printf("cm_t54: failed to initialize mmc0\n");
ret1 = omap_mmc_init(1, 0, 0, -1, -1);
if (ret1)
printf("cm_t54: failed to initialize mmc1\n");
if (ret0 && ret1)
return -1;
return 0;
}
#endif
#ifdef CONFIG_USB_HOST_ETHER
int ft_board_setup(void *blob, bd_t *bd)
{
uint8_t enetaddr[6];
/* MAC addr */
if (eth_env_get_enetaddr("usbethaddr", enetaddr)) {
fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address",
enetaddr, 6, 1);
}
return 0;
}
static void generate_mac_addr(uint8_t *enetaddr)
{
int reg;
reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
/*
* create a fake MAC address from the processor ID code.
* first byte is 0x02 to signify locally administered.
*/
enetaddr[0] = 0x02;
enetaddr[1] = readl(reg + 0x10) & 0xff;
enetaddr[2] = readl(reg + 0xC) & 0xff;
enetaddr[3] = readl(reg + 0x8) & 0xff;
enetaddr[4] = readl(reg) & 0xff;
enetaddr[5] = (readl(reg) >> 8) & 0xff;
}
/*
* Routine: handle_mac_address
* Description: prepare MAC address for on-board Ethernet.
*/
static int handle_mac_address(void)
{
uint8_t enetaddr[6];
int ret;
ret = eth_env_get_enetaddr("usbethaddr", enetaddr);
if (ret)
return 0;
ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (ret || !is_valid_ethaddr(enetaddr))
generate_mac_addr(enetaddr);
if (!is_valid_ethaddr(enetaddr))
return -1;
return eth_env_set_enetaddr("usbethaddr", enetaddr);
}
int board_eth_init(bd_t *bis)
{
return handle_mac_address();
}
#endif
#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
};
static void setup_host_clocks(bool enable)
{
int usbhost_clk = OPTFCLKEN_HSIC60M_P3_CLK |
OPTFCLKEN_HSIC480M_P3_CLK |
OPTFCLKEN_HSIC60M_P2_CLK |
OPTFCLKEN_HSIC480M_P2_CLK |
OPTFCLKEN_UTMI_P3_CLK |
OPTFCLKEN_UTMI_P2_CLK;
int usbtll_clk = OPTFCLKEN_USB_CH1_CLK_ENABLE |
OPTFCLKEN_USB_CH2_CLK_ENABLE;
int usbhub_clk = CKOBUFFER_CLK_ENABLE_MASK;
if (enable) {
/* Enable port 2 and 3 clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
/* Enable port 2 and 3 usb host ports tll clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
/* Request FREF_XTAL_CLK clock for HSIC USB Hub */
setbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
} else {
clrbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
clrbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
clrbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
}
}
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
int ret;
/* VCC_3V3_ETH */
cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_3V3, SMPS9_CTRL,
SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO);
setup_host_clocks(true);
ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
if (ret < 0)
printf("cm_t54: Failed to initialize ehci : %d\n", ret);
return ret;
}
int ehci_hcd_stop(void)
{
int ret = omap_ehci_hcd_stop();
setup_host_clocks(false);
cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_OFF,
SMPS9_CTRL, SMPS_MODE_SLP_AUTO);
return ret;
}
void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
{
/* The LAN9730 needs to be reset after the port power has been set. */
if (port == 3) {
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
udelay(10);
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
}
}
#endif