Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 07:34:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/misc/mxc_ocotp.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

451 lines
11 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2013 ADVANSEE
* Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
*
* Based on Dirk Behme's
* https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c,
* which is based on Freescale's
* http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6,
* which is:
* Copyright (C) 2011 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <fuse.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/sys_proto.h>
#define BO_CTRL_WR_UNLOCK 16
#define BM_CTRL_WR_UNLOCK 0xffff0000
#define BV_CTRL_WR_UNLOCK_KEY 0x3e77
#define BM_CTRL_ERROR 0x00000200
#define BM_CTRL_BUSY 0x00000100
#define BO_CTRL_ADDR 0
#ifdef CONFIG_MX7
#define BM_CTRL_ADDR 0x0000000f
#define BM_CTRL_RELOAD 0x00000400
#elif defined(CONFIG_MX7ULP)
#define BM_CTRL_ADDR 0x000000FF
#define BM_CTRL_RELOAD 0x00000400
#define BM_OUT_STATUS_DED 0x00000400
#define BM_OUT_STATUS_LOCKED 0x00000800
#define BM_OUT_STATUS_PROGFAIL 0x00001000
#elif defined(CONFIG_MX8M)
#define BM_CTRL_ADDR 0x000000ff
#else
#define BM_CTRL_ADDR 0x0000007f
#endif
#ifdef CONFIG_MX7
#define BO_TIMING_FSOURCE 12
#define BM_TIMING_FSOURCE 0x0007f000
#define BV_TIMING_FSOURCE_NS 1001
#define BO_TIMING_PROG 0
#define BM_TIMING_PROG 0x00000fff
#define BV_TIMING_PROG_US 10
#else
#define BO_TIMING_STROBE_READ 16
#define BM_TIMING_STROBE_READ 0x003f0000
#define BV_TIMING_STROBE_READ_NS 37
#define BO_TIMING_RELAX 12
#define BM_TIMING_RELAX 0x0000f000
#define BV_TIMING_RELAX_NS 17
#define BO_TIMING_STROBE_PROG 0
#define BM_TIMING_STROBE_PROG 0x00000fff
#define BV_TIMING_STROBE_PROG_US 10
#endif
#define BM_READ_CTRL_READ_FUSE 0x00000001
#define BF(value, field) (((value) << BO_##field) & BM_##field)
#define WRITE_POSTAMBLE_US 2
#if defined(CONFIG_MX6) || defined(CONFIG_VF610)
#define FUSE_BANK_SIZE 0x80
#ifdef CONFIG_MX6SL
#define FUSE_BANKS 8
#elif defined(CONFIG_MX6ULL) || defined(CONFIG_MX6SLL)
#define FUSE_BANKS 9
#else
#define FUSE_BANKS 16
#endif
#elif defined CONFIG_MX7
#define FUSE_BANK_SIZE 0x40
#define FUSE_BANKS 16
#elif defined(CONFIG_MX7ULP)
#define FUSE_BANK_SIZE 0x80
#define FUSE_BANKS 31
#elif defined(CONFIG_MX8M)
#define FUSE_BANK_SIZE 0x40
#define FUSE_BANKS 64
#else
#error "Unsupported architecture\n"
#endif
#if defined(CONFIG_MX6)
/*
* There is a hole in shadow registers address map of size 0x100
* between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX,
* iMX6UL, i.MX6ULL and i.MX6SLL.
* Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses,
* we should account for this hole in address space.
*
* Similar hole exists between bank 14 and bank 15 of size
* 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX.
* Note: iMX6SL has only 0-7 banks and there is no hole.
* Note: iMX6UL doesn't have this one.
*
* This function is to covert user input to physical bank index.
* Only needed when read fuse, because we use register offset, so
* need to calculate real register offset.
* When write, no need to consider hole, always use the bank/word
* index from fuse map.
*/
u32 fuse_bank_physical(int index)
{
u32 phy_index;
if (is_mx6sl() || is_mx7ulp()) {
phy_index = index;
} else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
if ((is_mx6ull() || is_mx6sll()) && index == 8)
index = 7;
if (index >= 6)
phy_index = fuse_bank_physical(5) + (index - 6) + 3;
else
phy_index = index;
} else {
if (index >= 15)
phy_index = fuse_bank_physical(14) + (index - 15) + 2;
else if (index >= 6)
phy_index = fuse_bank_physical(5) + (index - 6) + 3;
else
phy_index = index;
}
return phy_index;
}
u32 fuse_word_physical(u32 bank, u32 word_index)
{
if (is_mx6ull() || is_mx6sll()) {
if (bank == 8)
word_index = word_index + 4;
}
return word_index;
}
#else
u32 fuse_bank_physical(int index)
{
return index;
}
u32 fuse_word_physical(u32 bank, u32 word_index)
{
return word_index;
}
#endif
static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us)
{
while (readl(&regs->ctrl) & BM_CTRL_BUSY)
udelay(delay_us);
}
static void clear_error(struct ocotp_regs *regs)
{
writel(BM_CTRL_ERROR, &regs->ctrl_clr);
}
static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word,
int assert, const char *caller)
{
*regs = (struct ocotp_regs *)OCOTP_BASE_ADDR;
if (bank >= FUSE_BANKS ||
word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 ||
!assert) {
printf("mxc_ocotp %s(): Invalid argument\n", caller);
return -EINVAL;
}
if (is_mx6ull() || is_mx6sll()) {
if ((bank == 7 || bank == 8) &&
word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 3) {
printf("mxc_ocotp %s(): Invalid argument\n", caller);
return -EINVAL;
}
}
enable_ocotp_clk(1);
wait_busy(*regs, 1);
clear_error(*regs);
return 0;
}
static int finish_access(struct ocotp_regs *regs, const char *caller)
{
u32 err;
err = !!(readl(&regs->ctrl) & BM_CTRL_ERROR);
clear_error(regs);
#ifdef CONFIG_MX7ULP
/* Need to power down the OTP memory */
writel(1, &regs->pdn);
#endif
if (err) {
printf("mxc_ocotp %s(): Access protect error\n", caller);
return -EIO;
}
return 0;
}
static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val,
const char *caller)
{
return prepare_access(regs, bank, word, val != NULL, caller);
}
int fuse_read(u32 bank, u32 word, u32 *val)
{
struct ocotp_regs *regs;
int ret;
u32 phy_bank;
u32 phy_word;
ret = prepare_read(&regs, bank, word, val, __func__);
if (ret)
return ret;
phy_bank = fuse_bank_physical(bank);
phy_word = fuse_word_physical(bank, word);
*val = readl(&regs->bank[phy_bank].fuse_regs[phy_word << 2]);
#ifdef CONFIG_MX7ULP
if (readl(&regs->out_status) & BM_OUT_STATUS_DED) {
writel(BM_OUT_STATUS_DED, &regs->out_status_clr);
printf("mxc_ocotp %s(): fuse read wrong\n", __func__);
return -EIO;
}
#endif
return finish_access(regs, __func__);
}
#ifdef CONFIG_MX7
static void set_timing(struct ocotp_regs *regs)
{
u32 ipg_clk;
u32 fsource, prog;
u32 timing;
ipg_clk = mxc_get_clock(MXC_IPG_CLK);
fsource = DIV_ROUND_UP((ipg_clk / 1000) * BV_TIMING_FSOURCE_NS,
+ 1000000) + 1;
prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_PROG_US, 1000000) + 1;
timing = BF(fsource, TIMING_FSOURCE) | BF(prog, TIMING_PROG);
clrsetbits_le32(&regs->timing, BM_TIMING_FSOURCE | BM_TIMING_PROG,
timing);
}
#elif defined(CONFIG_MX7ULP)
static void set_timing(struct ocotp_regs *regs)
{
/* No timing set for MX7ULP */
}
#else
static void set_timing(struct ocotp_regs *regs)
{
u32 ipg_clk;
u32 relax, strobe_read, strobe_prog;
u32 timing;
ipg_clk = mxc_get_clock(MXC_IPG_CLK);
relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1;
strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS,
1000000000) + 2 * (relax + 1) - 1;
strobe_prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_STROBE_PROG_US,
1000000) + 2 * (relax + 1) - 1;
timing = BF(strobe_read, TIMING_STROBE_READ) |
BF(relax, TIMING_RELAX) |
BF(strobe_prog, TIMING_STROBE_PROG);
clrsetbits_le32(&regs->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX |
BM_TIMING_STROBE_PROG, timing);
}
#endif
static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word,
int write)
{
u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0;
#ifdef CONFIG_MX7
u32 addr = bank;
#elif defined CONFIG_MX8M
u32 addr = bank << 2 | word;
#else
u32 addr;
/* Bank 7 and Bank 8 only supports 4 words each for i.MX6ULL */
if ((is_mx6ull() || is_mx6sll()) && (bank > 7)) {
bank = bank - 1;
word += 4;
}
addr = bank << 3 | word;
#endif
set_timing(regs);
clrsetbits_le32(&regs->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR,
BF(wr_unlock, CTRL_WR_UNLOCK) |
BF(addr, CTRL_ADDR));
}
int fuse_sense(u32 bank, u32 word, u32 *val)
{
struct ocotp_regs *regs;
int ret;
ret = prepare_read(&regs, bank, word, val, __func__);
if (ret)
return ret;
setup_direct_access(regs, bank, word, false);
writel(BM_READ_CTRL_READ_FUSE, &regs->read_ctrl);
wait_busy(regs, 1);
#ifdef CONFIG_MX7
*val = readl((&regs->read_fuse_data0) + (word << 2));
#else
*val = readl(&regs->read_fuse_data);
#endif
#ifdef CONFIG_MX7ULP
if (readl(&regs->out_status) & BM_OUT_STATUS_DED) {
writel(BM_OUT_STATUS_DED, &regs->out_status_clr);
printf("mxc_ocotp %s(): fuse read wrong\n", __func__);
return -EIO;
}
#endif
return finish_access(regs, __func__);
}
static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word,
const char *caller)
{
#ifdef CONFIG_MX7ULP
u32 val;
int ret;
/* Only bank 0 and 1 are redundancy mode, others are ECC mode */
if (bank != 0 && bank != 1) {
ret = fuse_sense(bank, word, &val);
if (ret)
return ret;
if (val != 0) {
printf("mxc_ocotp: The word has been programmed, no more write\n");
return -EPERM;
}
}
#endif
return prepare_access(regs, bank, word, true, caller);
}
int fuse_prog(u32 bank, u32 word, u32 val)
{
struct ocotp_regs *regs;
int ret;
ret = prepare_write(&regs, bank, word, __func__);
if (ret)
return ret;
setup_direct_access(regs, bank, word, true);
#ifdef CONFIG_MX7
switch (word) {
case 0:
writel(0, &regs->data1);
writel(0, &regs->data2);
writel(0, &regs->data3);
writel(val, &regs->data0);
break;
case 1:
writel(val, &regs->data1);
writel(0, &regs->data2);
writel(0, &regs->data3);
writel(0, &regs->data0);
break;
case 2:
writel(0, &regs->data1);
writel(val, &regs->data2);
writel(0, &regs->data3);
writel(0, &regs->data0);
break;
case 3:
writel(0, &regs->data1);
writel(0, &regs->data2);
writel(val, &regs->data3);
writel(0, &regs->data0);
break;
}
wait_busy(regs, BV_TIMING_PROG_US);
#else
writel(val, &regs->data);
wait_busy(regs, BV_TIMING_STROBE_PROG_US);
#endif
udelay(WRITE_POSTAMBLE_US);
#ifdef CONFIG_MX7ULP
if (readl(&regs->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) {
writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), &regs->out_status_clr);
printf("mxc_ocotp %s(): fuse write is failed\n", __func__);
return -EIO;
}
#endif
return finish_access(regs, __func__);
}
int fuse_override(u32 bank, u32 word, u32 val)
{
struct ocotp_regs *regs;
int ret;
u32 phy_bank;
u32 phy_word;
ret = prepare_write(&regs, bank, word, __func__);
if (ret)
return ret;
phy_bank = fuse_bank_physical(bank);
phy_word = fuse_word_physical(bank, word);
writel(val, &regs->bank[phy_bank].fuse_regs[phy_word << 2]);
#ifdef CONFIG_MX7ULP
if (readl(&regs->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) {
writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), &regs->out_status_clr);
printf("mxc_ocotp %s(): fuse write is failed\n", __func__);
return -EIO;
}
#endif
return finish_access(regs, __func__);
}
Reference in a new issue View git blame Copy permalink