mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
370 lines
8.2 KiB
C
370 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clock_legacy.h>
|
|
#include <command.h>
|
|
#include <div64.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int get_clocks(void)
|
|
{
|
|
#ifdef CONFIG_FSL_ESDHC_IMX
|
|
#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC0_RBASE
|
|
gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC1_RBASE
|
|
gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
|
#endif
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static u32 get_fast_plat_clk(void)
|
|
{
|
|
return scg_clk_get_rate(SCG_NIC0_CLK);
|
|
}
|
|
|
|
static u32 get_slow_plat_clk(void)
|
|
{
|
|
return scg_clk_get_rate(SCG_NIC1_CLK);
|
|
}
|
|
|
|
static u32 get_ipg_clk(void)
|
|
{
|
|
return scg_clk_get_rate(SCG_NIC1_BUS_CLK);
|
|
}
|
|
|
|
u32 get_lpuart_clk(void)
|
|
{
|
|
int index = 0;
|
|
|
|
const u32 lpuart_array[] = {
|
|
LPUART0_RBASE,
|
|
LPUART1_RBASE,
|
|
LPUART2_RBASE,
|
|
LPUART3_RBASE,
|
|
LPUART4_RBASE,
|
|
LPUART5_RBASE,
|
|
LPUART6_RBASE,
|
|
LPUART7_RBASE,
|
|
};
|
|
|
|
const enum pcc_clk lpuart_pcc_clks[] = {
|
|
PER_CLK_LPUART4,
|
|
PER_CLK_LPUART5,
|
|
PER_CLK_LPUART6,
|
|
PER_CLK_LPUART7,
|
|
};
|
|
|
|
for (index = 0; index < 8; index++) {
|
|
if (lpuart_array[index] == LPUART_BASE)
|
|
break;
|
|
}
|
|
|
|
if (index < 4 || index > 7)
|
|
return 0;
|
|
|
|
return pcc_clock_get_rate(lpuart_pcc_clks[index - 4]);
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_I2C_IMX_LPI2C
|
|
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
|
|
{
|
|
/* Set parent to FIRC DIV2 clock */
|
|
const enum pcc_clk lpi2c_pcc_clks[] = {
|
|
PER_CLK_LPI2C4,
|
|
PER_CLK_LPI2C5,
|
|
PER_CLK_LPI2C6,
|
|
PER_CLK_LPI2C7,
|
|
};
|
|
|
|
if (i2c_num < 4 || i2c_num > 7)
|
|
return -EINVAL;
|
|
|
|
if (enable) {
|
|
pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4], false);
|
|
pcc_clock_sel(lpi2c_pcc_clks[i2c_num - 4], SCG_FIRC_DIV2_CLK);
|
|
pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4], true);
|
|
} else {
|
|
pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4], false);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
u32 imx_get_i2cclk(unsigned i2c_num)
|
|
{
|
|
const enum pcc_clk lpi2c_pcc_clks[] = {
|
|
PER_CLK_LPI2C4,
|
|
PER_CLK_LPI2C5,
|
|
PER_CLK_LPI2C6,
|
|
PER_CLK_LPI2C7,
|
|
};
|
|
|
|
if (i2c_num < 4 || i2c_num > 7)
|
|
return 0;
|
|
|
|
return pcc_clock_get_rate(lpi2c_pcc_clks[i2c_num - 4]);
|
|
}
|
|
#endif
|
|
|
|
unsigned int mxc_get_clock(enum mxc_clock clk)
|
|
{
|
|
switch (clk) {
|
|
case MXC_ARM_CLK:
|
|
return scg_clk_get_rate(SCG_CORE_CLK);
|
|
case MXC_AXI_CLK:
|
|
return get_fast_plat_clk();
|
|
case MXC_AHB_CLK:
|
|
return get_slow_plat_clk();
|
|
case MXC_IPG_CLK:
|
|
return get_ipg_clk();
|
|
case MXC_I2C_CLK:
|
|
return pcc_clock_get_rate(PER_CLK_LPI2C4);
|
|
case MXC_UART_CLK:
|
|
return get_lpuart_clk();
|
|
case MXC_ESDHC_CLK:
|
|
return pcc_clock_get_rate(PER_CLK_USDHC0);
|
|
case MXC_ESDHC2_CLK:
|
|
return pcc_clock_get_rate(PER_CLK_USDHC1);
|
|
case MXC_DDR_CLK:
|
|
return scg_clk_get_rate(SCG_DDR_CLK);
|
|
default:
|
|
printf("Unsupported mxc_clock %d\n", clk);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void init_clk_usdhc(u32 index)
|
|
{
|
|
switch (index) {
|
|
case 0:
|
|
/*Disable the clock before configure it */
|
|
pcc_clock_enable(PER_CLK_USDHC0, false);
|
|
|
|
/* 158MHz / 1 = 158MHz */
|
|
pcc_clock_sel(PER_CLK_USDHC0, SCG_NIC1_CLK);
|
|
pcc_clock_div_config(PER_CLK_USDHC0, false, 1);
|
|
pcc_clock_enable(PER_CLK_USDHC0, true);
|
|
break;
|
|
case 1:
|
|
/*Disable the clock before configure it */
|
|
pcc_clock_enable(PER_CLK_USDHC1, false);
|
|
|
|
/* 158MHz / 1 = 158MHz */
|
|
pcc_clock_sel(PER_CLK_USDHC1, SCG_NIC1_CLK);
|
|
pcc_clock_div_config(PER_CLK_USDHC1, false, 1);
|
|
pcc_clock_enable(PER_CLK_USDHC1, true);
|
|
break;
|
|
default:
|
|
printf("Invalid index for USDHC %d\n", index);
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_MXC_OCOTP
|
|
|
|
#define OCOTP_CTRL_PCC1_SLOT (38)
|
|
#define OCOTP_CTRL_HIGH4K_PCC1_SLOT (39)
|
|
|
|
void enable_ocotp_clk(unsigned char enable)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* Seems the OCOTP CLOCKs have been enabled at default,
|
|
* check its inuse flag
|
|
*/
|
|
|
|
val = readl(PCC1_RBASE + 4 * OCOTP_CTRL_PCC1_SLOT);
|
|
if (!(val & PCC_INUSE_MASK))
|
|
writel(PCC_CGC_MASK, (PCC1_RBASE + 4 * OCOTP_CTRL_PCC1_SLOT));
|
|
|
|
val = readl(PCC1_RBASE + 4 * OCOTP_CTRL_HIGH4K_PCC1_SLOT);
|
|
if (!(val & PCC_INUSE_MASK))
|
|
writel(PCC_CGC_MASK,
|
|
(PCC1_RBASE + 4 * OCOTP_CTRL_HIGH4K_PCC1_SLOT));
|
|
}
|
|
#endif
|
|
|
|
void enable_usboh3_clk(unsigned char enable)
|
|
{
|
|
if (enable) {
|
|
pcc_clock_enable(PER_CLK_USB0, false);
|
|
pcc_clock_sel(PER_CLK_USB0, SCG_NIC1_BUS_CLK);
|
|
pcc_clock_enable(PER_CLK_USB0, true);
|
|
|
|
#ifdef CONFIG_USB_MAX_CONTROLLER_COUNT
|
|
if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1) {
|
|
pcc_clock_enable(PER_CLK_USB1, false);
|
|
pcc_clock_sel(PER_CLK_USB1, SCG_NIC1_BUS_CLK);
|
|
pcc_clock_enable(PER_CLK_USB1, true);
|
|
}
|
|
#endif
|
|
|
|
pcc_clock_enable(PER_CLK_USB_PHY, true);
|
|
pcc_clock_enable(PER_CLK_USB_PL301, true);
|
|
} else {
|
|
pcc_clock_enable(PER_CLK_USB0, false);
|
|
pcc_clock_enable(PER_CLK_USB1, false);
|
|
pcc_clock_enable(PER_CLK_USB_PHY, false);
|
|
pcc_clock_enable(PER_CLK_USB_PL301, false);
|
|
}
|
|
}
|
|
|
|
static void lpuart_set_clk(uint32_t index, enum scg_clk clk)
|
|
{
|
|
const enum pcc_clk lpuart_pcc_clks[] = {
|
|
PER_CLK_LPUART4,
|
|
PER_CLK_LPUART5,
|
|
PER_CLK_LPUART6,
|
|
PER_CLK_LPUART7,
|
|
};
|
|
|
|
if (index < 4 || index > 7)
|
|
return;
|
|
|
|
#ifndef CONFIG_CLK_DEBUG
|
|
pcc_clock_enable(lpuart_pcc_clks[index - 4], false);
|
|
#endif
|
|
pcc_clock_sel(lpuart_pcc_clks[index - 4], clk);
|
|
pcc_clock_enable(lpuart_pcc_clks[index - 4], true);
|
|
}
|
|
|
|
static void init_clk_lpuart(void)
|
|
{
|
|
u32 index = 0, i;
|
|
|
|
const u32 lpuart_array[] = {
|
|
LPUART0_RBASE,
|
|
LPUART1_RBASE,
|
|
LPUART2_RBASE,
|
|
LPUART3_RBASE,
|
|
LPUART4_RBASE,
|
|
LPUART5_RBASE,
|
|
LPUART6_RBASE,
|
|
LPUART7_RBASE,
|
|
};
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (lpuart_array[i] == LPUART_BASE) {
|
|
index = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
lpuart_set_clk(index, SCG_SOSC_DIV2_CLK);
|
|
}
|
|
|
|
static void init_clk_rgpio2p(void)
|
|
{
|
|
/*Enable RGPIO2P1 clock */
|
|
pcc_clock_enable(PER_CLK_RGPIO2P1, true);
|
|
|
|
/*
|
|
* Hard code to enable RGPIO2P0 clock since it is not
|
|
* in clock frame for A7 domain
|
|
*/
|
|
writel(PCC_CGC_MASK, (PCC0_RBASE + 0x3C));
|
|
}
|
|
|
|
/* Configure PLL/PFD freq */
|
|
void clock_init(void)
|
|
{
|
|
/*
|
|
* ROM has enabled clocks:
|
|
* A4 side: SIRC 16Mhz (DIV1-3 off), FIRC 48Mhz (DIV1-2 on),
|
|
* Non-LP-boot: SOSC, SPLL PFD0 (scs selected)
|
|
* A7 side: SPLL PFD0 (scs selected, 413Mhz),
|
|
* APLL PFD0 (352Mhz), DDRCLK, all NIC clocks
|
|
* A7 Plat0 (NIC0) = 176Mhz, Plat1 (NIC1) = 176Mhz,
|
|
* IP BUS (NIC1_BUS) = 58.6Mhz
|
|
*
|
|
* In u-boot:
|
|
* 1. Enable PFD1-3 of APLL for A7 side. Enable FIRC and DIVs.
|
|
* 2. Enable USB PLL
|
|
* 3. Init the clocks of peripherals used in u-boot bu
|
|
* without set rate interface.The clocks for these
|
|
* peripherals are enabled in this intialization.
|
|
* 4.Other peripherals with set clock rate interface
|
|
* does not be set in this function.
|
|
*/
|
|
|
|
scg_a7_firc_init();
|
|
|
|
scg_a7_soscdiv_init();
|
|
|
|
scg_a7_init_core_clk();
|
|
|
|
/* APLL PFD1 = 270Mhz, PFD2=345.6Mhz, PFD3=800Mhz */
|
|
scg_enable_pll_pfd(SCG_APLL_PFD1_CLK, 35);
|
|
scg_enable_pll_pfd(SCG_APLL_PFD2_CLK, 28);
|
|
scg_enable_pll_pfd(SCG_APLL_PFD3_CLK, 12);
|
|
|
|
init_clk_lpuart();
|
|
|
|
init_clk_rgpio2p();
|
|
|
|
enable_usboh3_clk(1);
|
|
}
|
|
|
|
#ifdef CONFIG_IMX_HAB
|
|
void hab_caam_clock_enable(unsigned char enable)
|
|
{
|
|
if (enable)
|
|
pcc_clock_enable(PER_CLK_CAAM, true);
|
|
else
|
|
pcc_clock_enable(PER_CLK_CAAM, false);
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
/*
|
|
* Dump some core clockes.
|
|
*/
|
|
int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
char *const argv[])
|
|
{
|
|
|
|
u32 freq;
|
|
freq = decode_pll(PLL_A7_SPLL);
|
|
printf("PLL_A7_SPLL %8d MHz\n", freq / 1000000);
|
|
|
|
freq = decode_pll(PLL_A7_APLL);
|
|
printf("PLL_A7_APLL %8d MHz\n", freq / 1000000);
|
|
|
|
freq = decode_pll(PLL_USB);
|
|
printf("PLL_USB %8d MHz\n", freq / 1000000);
|
|
|
|
printf("\n");
|
|
|
|
printf("CORE %8d kHz\n", scg_clk_get_rate(SCG_CORE_CLK) / 1000);
|
|
printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
|
|
printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
|
|
printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
|
|
printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
|
|
printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
|
|
printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
|
|
printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
|
|
printf("I2C4 %8d kHz\n", mxc_get_clock(MXC_I2C_CLK) / 1000);
|
|
|
|
scg_a7_info();
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
clocks, CONFIG_SYS_MAXARGS, 1, do_mx7_showclocks,
|
|
"display clocks",
|
|
""
|
|
);
|
|
#endif
|