Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 11:13:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/fsl_esdhc_imx.h
Haibo Chen 925f6900c8 mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary 
After commit f132aab403 ("Revert "mmc: fsl_esdhc_imx: use
VENDORSPEC_FRC_SDCLK_ON to control card clock output""), it
involve issue in mmc_switch_voltage(), because of the special
design of usdhc.

For FSL_USDHC, it do not implement VENDORSPEC_CKEN/PEREN/HCKEN/IPGEN,
these are reserved bits(Though RM contain the definition of these bits,
but actually internal IC logic do not implement, already confirm with
IC team). Instead, use VENDORSPEC_FRC_SDCLK_ON to gate on/off the card
clock output. Here is the definition of this bit in RM:

[8] FRC_SDCLK_ON
Force CLK output active
Do not set this bit to 1 unless it is necessary. Also, make sure that
this bit is cleared when uSDHC’s clock is about to be changed (frequency
change, clock source change, or delay chain tuning).
0b - CLK active or inactive is fully controlled by the hardware.
1b - Force CLK active

In default, the FRC_SDCLK_ON is 0. This means, when there is no command
or data transfer on bus, hardware will gate off the card clock. But in
some case, we need the card clock keep on. Take IO voltage 1.8v switch
as example, after IO voltage change to 1.8v, spec require gate off the
card clock for 5ms, and gate on the clock back, once detect the card
clock on, then the card will draw the dat0 to high immediately. If there
is not clock gate off/on behavior, some card will keep the dat0 to low
level. This is the reason we fail in mmc_switch_voltage().

To fix this issue, and concern that this is only the fsl usdhc hardware
design limitation, set the bit FRC_SDCLK_ON in the beginning of the
wait_dat0() and clear it in the end. To make sure the 1.8v IO voltage
switch process align with SD specification.

For standard tuning process, usdhc specification also require the card
clock keep on, so also add these behavior in fsl_esdhc_execute_tuning().

Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-03-16 16:40:56 +09:00

273 lines
8.4 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* FSL SD/MMC Defines
*-------------------------------------------------------------------
*
* Copyright 2019 NXP
* Yangbo Lu <yangbo.lu@nxp.com>
*
* Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc
*/
#ifndef __FSL_ESDHC_IMX_H__
#define __FSL_ESDHC_IMX_H__
#include <linux/bitops.h>
#include <linux/errno.h>
#include <asm/byteorder.h>
/* needed for the mmc_cfg definition */
#include <mmc.h>
/* FSL eSDHC-specific constants */
#define SYSCTL 0x0002e02c
#define SYSCTL_INITA 0x08000000
#define SYSCTL_TIMEOUT_MASK 0x000f0000
#define SYSCTL_CLOCK_MASK 0x0000fff0
#define SYSCTL_CKEN 0x00000008
#define SYSCTL_PEREN 0x00000004
#define SYSCTL_HCKEN 0x00000002
#define SYSCTL_IPGEN 0x00000001
#define SYSCTL_RSTA 0x01000000
#define SYSCTL_RSTC 0x02000000
#define SYSCTL_RSTD 0x04000000
#define VENDORSPEC_CKEN 0x00004000
#define VENDORSPEC_PEREN 0x00002000
#define VENDORSPEC_HCKEN 0x00001000
#define VENDORSPEC_IPGEN 0x00000800
#define VENDORSPEC_INIT 0x20007809
#define VENDORSPEC_FRC_SDCLK_ON 0x00000100
#define IRQSTAT 0x0002e030
#define IRQSTAT_DMAE (0x10000000)
#define IRQSTAT_AC12E (0x01000000)
#define IRQSTAT_DEBE (0x00400000)
#define IRQSTAT_DCE (0x00200000)
#define IRQSTAT_DTOE (0x00100000)
#define IRQSTAT_CIE (0x00080000)
#define IRQSTAT_CEBE (0x00040000)
#define IRQSTAT_CCE (0x00020000)
#define IRQSTAT_CTOE (0x00010000)
#define IRQSTAT_CINT (0x00000100)
#define IRQSTAT_CRM (0x00000080)
#define IRQSTAT_CINS (0x00000040)
#define IRQSTAT_BRR (0x00000020)
#define IRQSTAT_BWR (0x00000010)
#define IRQSTAT_DINT (0x00000008)
#define IRQSTAT_BGE (0x00000004)
#define IRQSTAT_TC (0x00000002)
#define IRQSTAT_CC (0x00000001)
#define CMD_ERR (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE)
#define DATA_ERR (IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE | \
IRQSTAT_DMAE)
#define DATA_COMPLETE (IRQSTAT_TC | IRQSTAT_DINT)
#define IRQSTATEN 0x0002e034
#define IRQSTATEN_DMAE (0x10000000)
#define IRQSTATEN_AC12E (0x01000000)
#define IRQSTATEN_DEBE (0x00400000)
#define IRQSTATEN_DCE (0x00200000)
#define IRQSTATEN_DTOE (0x00100000)
#define IRQSTATEN_CIE (0x00080000)
#define IRQSTATEN_CEBE (0x00040000)
#define IRQSTATEN_CCE (0x00020000)
#define IRQSTATEN_CTOE (0x00010000)
#define IRQSTATEN_CINT (0x00000100)
#define IRQSTATEN_CRM (0x00000080)
#define IRQSTATEN_CINS (0x00000040)
#define IRQSTATEN_BRR (0x00000020)
#define IRQSTATEN_BWR (0x00000010)
#define IRQSTATEN_DINT (0x00000008)
#define IRQSTATEN_BGE (0x00000004)
#define IRQSTATEN_TC (0x00000002)
#define IRQSTATEN_CC (0x00000001)
#define ESDHCCTL 0x0002e40c
#define ESDHCCTL_PCS (0x00080000)
#define PRSSTAT 0x0002e024
#define PRSSTAT_DAT0 (0x01000000)
#define PRSSTAT_CLSL (0x00800000)
#define PRSSTAT_WPSPL (0x00080000)
#define PRSSTAT_CDPL (0x00040000)
#define PRSSTAT_CINS (0x00010000)
#define PRSSTAT_BREN (0x00000800)
#define PRSSTAT_BWEN (0x00000400)
#define PRSSTAT_SDOFF (0x00000080)
#define PRSSTAT_SDSTB (0X00000008)
#define PRSSTAT_DLA (0x00000004)
#define PRSSTAT_CICHB (0x00000002)
#define PRSSTAT_CIDHB (0x00000001)
#define PROCTL 0x0002e028
#define PROCTL_INIT 0x00000020
#define PROCTL_DTW_4 0x00000002
#define PROCTL_DTW_8 0x00000004
#define PROCTL_D3CD 0x00000008
#define CMDARG 0x0002e008
#define XFERTYP 0x0002e00c
#define XFERTYP_CMD(x) ((x & 0x3f) << 24)
#define XFERTYP_CMDTYP_NORMAL 0x0
#define XFERTYP_CMDTYP_SUSPEND 0x00400000
#define XFERTYP_CMDTYP_RESUME 0x00800000
#define XFERTYP_CMDTYP_ABORT 0x00c00000
#define XFERTYP_DPSEL 0x00200000
#define XFERTYP_CICEN 0x00100000
#define XFERTYP_CCCEN 0x00080000
#define XFERTYP_RSPTYP_NONE 0
#define XFERTYP_RSPTYP_136 0x00010000
#define XFERTYP_RSPTYP_48 0x00020000
#define XFERTYP_RSPTYP_48_BUSY 0x00030000
#define XFERTYP_MSBSEL 0x00000020
#define XFERTYP_DTDSEL 0x00000010
#define XFERTYP_DDREN 0x00000008
#define XFERTYP_AC12EN 0x00000004
#define XFERTYP_BCEN 0x00000002
#define XFERTYP_DMAEN 0x00000001
#define CINS_TIMEOUT 1000
#define PIO_TIMEOUT 500
#define DSADDR 0x2e004
#define CMDRSP0 0x2e010
#define CMDRSP1 0x2e014
#define CMDRSP2 0x2e018
#define CMDRSP3 0x2e01c
#define DATPORT 0x2e020
#define WML 0x2e044
#define WML_WRITE 0x00010000
#ifdef CONFIG_FSL_SDHC_V2_3
#define WML_RD_WML_MAX 0x80
#define WML_WR_WML_MAX 0x80
#define WML_RD_WML_MAX_VAL 0x0
#define WML_WR_WML_MAX_VAL 0x0
#define WML_RD_WML_MASK 0x7f
#define WML_WR_WML_MASK 0x7f0000
#else
#define WML_RD_WML_MAX 0x10
#define WML_WR_WML_MAX 0x80
#define WML_RD_WML_MAX_VAL 0x10
#define WML_WR_WML_MAX_VAL 0x80
#define WML_RD_WML_MASK 0xff
#define WML_WR_WML_MASK 0xff0000
#endif
#define BLKATTR 0x2e004
#define BLKATTR_CNT(x) ((x & 0xffff) << 16)
#define BLKATTR_SIZE(x) (x & 0x1fff)
#define MAX_BLK_CNT 0x7fff /* so malloc will have enough room with 32M */
#define HOSTCAPBLT_VS18 0x04000000
#define HOSTCAPBLT_VS30 0x02000000
#define HOSTCAPBLT_VS33 0x01000000
#define HOSTCAPBLT_SRS 0x00800000
#define HOSTCAPBLT_DMAS 0x00400000
#define HOSTCAPBLT_HSS 0x00200000
#define ESDHC_VENDORSPEC_VSELECT 0x00000002 /* Use 1.8V */
/* Imported from Linux Kernel drivers/mmc/host/sdhci-esdhc-imx.c */
#define MIX_CTRL_DDREN BIT(3)
#define MIX_CTRL_DTDSEL_READ BIT(4)
#define MIX_CTRL_AC23EN BIT(7)
#define MIX_CTRL_EXE_TUNE BIT(22)
#define MIX_CTRL_SMPCLK_SEL BIT(23)
#define MIX_CTRL_AUTO_TUNE_EN BIT(24)
#define MIX_CTRL_FBCLK_SEL BIT(25)
#define MIX_CTRL_HS400_EN BIT(26)
#define MIX_CTRL_HS400_ES BIT(27)
/* Bits 3 and 6 are not SDHCI standard definitions */
#define MIX_CTRL_SDHCI_MASK 0xb7
/* Tuning bits */
#define MIX_CTRL_TUNING_MASK 0x03c00000
/* strobe dll register */
#define ESDHC_STROBE_DLL_CTRL 0x70
#define ESDHC_STROBE_DLL_CTRL_ENABLE BIT(0)
#define ESDHC_STROBE_DLL_CTRL_RESET BIT(1)
#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT 0x7
#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT 3
#define ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT (4 << 20)
#define ESDHC_STROBE_DLL_STATUS 0x74
#define ESDHC_STROBE_DLL_STS_REF_LOCK BIT(1)
#define ESDHC_STROBE_DLL_STS_SLV_LOCK 0x1
#define ESDHC_STROBE_DLL_CLK_FREQ 100000000
#define ESDHC_STD_TUNING_EN BIT(24)
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP_DEFAULT 0x1
#define ESDHC_TUNING_START_TAP_MASK 0x7f
#define ESDHC_TUNING_CMD_CRC_CHECK_DISABLE BIT(7)
#define ESDHC_TUNING_STEP_MASK 0x00070000
#define ESDHC_TUNING_STEP_SHIFT 16
#define ESDHC_FLAG_MULTIBLK_NO_INT BIT(1)
#define ESDHC_FLAG_ENGCM07207 BIT(2)
#define ESDHC_FLAG_USDHC BIT(3)
#define ESDHC_FLAG_MAN_TUNING BIT(4)
#define ESDHC_FLAG_STD_TUNING BIT(5)
#define ESDHC_FLAG_HAVE_CAP1 BIT(6)
#define ESDHC_FLAG_ERR004536 BIT(7)
#define ESDHC_FLAG_HS200 BIT(8)
#define ESDHC_FLAG_HS400 BIT(9)
#define ESDHC_FLAG_ERR010450 BIT(10)
#define ESDHC_FLAG_HS400_ES BIT(11)
struct fsl_esdhc_cfg {
phys_addr_t esdhc_base;
u32 sdhc_clk;
u8 max_bus_width;
int wp_enable;
int vs18_enable; /* Use 1.8V if set to 1 */
struct mmc_config cfg;
};
/* Select the correct accessors depending on endianess */
#if defined CONFIG_SYS_FSL_ESDHC_LE
#define esdhc_read32 in_le32
#define esdhc_write32 out_le32
#define esdhc_clrsetbits32 clrsetbits_le32
#define esdhc_clrbits32 clrbits_le32
#define esdhc_setbits32 setbits_le32
#elif defined(CONFIG_SYS_FSL_ESDHC_BE)
#define esdhc_read32 in_be32
#define esdhc_write32 out_be32
#define esdhc_clrsetbits32 clrsetbits_be32
#define esdhc_clrbits32 clrbits_be32
#define esdhc_setbits32 setbits_be32
#elif __BYTE_ORDER == __LITTLE_ENDIAN
#define esdhc_read32 in_le32
#define esdhc_write32 out_le32
#define esdhc_clrsetbits32 clrsetbits_le32
#define esdhc_clrbits32 clrbits_le32
#define esdhc_setbits32 setbits_le32
#elif __BYTE_ORDER == __BIG_ENDIAN
#define esdhc_read32 in_be32
#define esdhc_write32 out_be32
#define esdhc_clrsetbits32 clrsetbits_be32
#define esdhc_clrbits32 clrbits_be32
#define esdhc_setbits32 setbits_be32
#else
#error "Endianess is not defined: please fix to continue"
#endif
#ifdef CONFIG_FSL_ESDHC_IMX
int fsl_esdhc_mmc_init(struct bd_info *bis);
int fsl_esdhc_initialize(struct bd_info *bis, struct fsl_esdhc_cfg *cfg);
void fdt_fixup_esdhc(void *blob, struct bd_info *bd);
#else
static inline int fsl_esdhc_mmc_init(struct bd_info *bis) { return -ENOSYS; }
static inline void fdt_fixup_esdhc(void *blob, struct bd_info *bd) {}
#endif /* CONFIG_FSL_ESDHC_IMX */
void __noreturn mmc_boot(void);
void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
#endif /* __FSL_ESDHC_IMX_H__ */
Reference in a new issue View git blame Copy permalink