mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
9d24274509
Add support for U-BOOT SPL. NOR and RAM mode are supported. There are 3 images in NOR flash. u-boot.img, dtb and kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
188 lines
4.4 KiB
ArmAsm
188 lines
4.4 KiB
ArmAsm
/*
|
|
* (C) Copyright 2007 Michal Simek
|
|
* (C) Copyright 2004 Atmark Techno, Inc.
|
|
*
|
|
* Michal SIMEK <monstr@monstr.eu>
|
|
* Yasushi SHOJI <yashi@atmark-techno.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
|
|
.text
|
|
.global _start
|
|
_start:
|
|
/*
|
|
* reserve registers:
|
|
* r10: Stores little/big endian offset for vectors
|
|
* r2: Stores imm opcode
|
|
* r3: Stores brai opcode
|
|
*/
|
|
|
|
mts rmsr, r0 /* disable cache */
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
addi r1, r0, CONFIG_SPL_STACK_ADDR
|
|
addi r1, r1, -4 /* Decrement SP to top of memory */
|
|
#else
|
|
addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET
|
|
addi r1, r1, -4 /* Decrement SP to top of memory */
|
|
|
|
/* Find-out if u-boot is running on BIG/LITTLE endian platform
|
|
* There are some steps which is necessary to keep in mind:
|
|
* 1. Setup offset value to r6
|
|
* 2. Store word offset value to address 0x0
|
|
* 3. Load just byte from address 0x0
|
|
* 4a) LITTLE endian - r10 contains 0x2 because it is the smallest
|
|
* value that's why is on address 0x0
|
|
* 4b) BIG endian - r10 contains 0x0 because 0x2 offset is on addr 0x3
|
|
*/
|
|
addik r6, r0, 0x2 /* BIG/LITTLE endian offset */
|
|
lwi r7, r0, 0x28
|
|
swi r6, r0, 0x28 /* used first unused MB vector */
|
|
lbui r10, r0, 0x28 /* used first unused MB vector */
|
|
swi r7, r0, 0x28
|
|
|
|
/* add opcode instruction for 32bit jump - 2 instruction imm & brai */
|
|
addi r2, r0, 0xb0000000 /* hex b000 opcode imm */
|
|
addi r3, r0, 0xb8080000 /* hew b808 opcode brai */
|
|
|
|
#ifdef CONFIG_SYS_RESET_ADDRESS
|
|
/* reset address */
|
|
swi r2, r0, 0x0 /* reset address - imm opcode */
|
|
swi r3, r0, 0x4 /* reset address - brai opcode */
|
|
|
|
addik r6, r0, CONFIG_SYS_RESET_ADDRESS
|
|
sw r6, r1, r0
|
|
lhu r7, r1, r10
|
|
rsubi r8, r10, 0x2
|
|
sh r7, r0, r8
|
|
rsubi r8, r10, 0x6
|
|
sh r6, r0, r8
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USR_EXCEP
|
|
/* user_vector_exception */
|
|
swi r2, r0, 0x8 /* user vector exception - imm opcode */
|
|
swi r3, r0, 0xC /* user vector exception - brai opcode */
|
|
|
|
addik r6, r0, _exception_handler
|
|
sw r6, r1, r0
|
|
/*
|
|
* BIG ENDIAN memory map for user exception
|
|
* 0x8: 0xB000XXXX
|
|
* 0xC: 0xB808XXXX
|
|
*
|
|
* then it is necessary to count address for storing the most significant
|
|
* 16bits from _exception_handler address and copy it to
|
|
* 0xa address. Big endian use offset in r10=0 that's why is it just
|
|
* 0xa address. The same is done for the least significant 16 bits
|
|
* for 0xe address.
|
|
*
|
|
* LITTLE ENDIAN memory map for user exception
|
|
* 0x8: 0xXXXX00B0
|
|
* 0xC: 0xXXXX08B8
|
|
*
|
|
* Offset is for little endian setup to 0x2. rsubi instruction decrease
|
|
* address value to ensure that points to proper place which is
|
|
* 0x8 for the most significant 16 bits and
|
|
* 0xC for the least significant 16 bits
|
|
*/
|
|
lhu r7, r1, r10
|
|
rsubi r8, r10, 0xa
|
|
sh r7, r0, r8
|
|
rsubi r8, r10, 0xe
|
|
sh r6, r0, r8
|
|
#endif
|
|
|
|
/* interrupt_handler */
|
|
swi r2, r0, 0x10 /* interrupt - imm opcode */
|
|
swi r3, r0, 0x14 /* interrupt - brai opcode */
|
|
|
|
addik r6, r0, _interrupt_handler
|
|
sw r6, r1, r0
|
|
lhu r7, r1, r10
|
|
rsubi r8, r10, 0x12
|
|
sh r7, r0, r8
|
|
rsubi r8, r10, 0x16
|
|
sh r6, r0, r8
|
|
|
|
/* hardware exception */
|
|
swi r2, r0, 0x20 /* hardware exception - imm opcode */
|
|
swi r3, r0, 0x24 /* hardware exception - brai opcode */
|
|
|
|
addik r6, r0, _hw_exception_handler
|
|
sw r6, r1, r0
|
|
lhu r7, r1, r10
|
|
rsubi r8, r10, 0x22
|
|
sh r7, r0, r8
|
|
rsubi r8, r10, 0x26
|
|
sh r6, r0, r8
|
|
#endif /* BUILD_SPL */
|
|
|
|
/* Flush cache before enable cache */
|
|
addik r5, r0, 0
|
|
addik r6, r0, XILINX_DCACHE_BYTE_SIZE
|
|
flush: bralid r15, flush_cache
|
|
nop
|
|
|
|
/* enable instruction and data cache */
|
|
mfs r12, rmsr
|
|
ori r12, r12, 0xa0
|
|
mts rmsr, r12
|
|
|
|
clear_bss:
|
|
/* clear BSS segments */
|
|
addi r5, r0, __bss_start
|
|
addi r4, r0, __bss_end
|
|
cmp r6, r5, r4
|
|
beqi r6, 3f
|
|
2:
|
|
swi r0, r5, 0 /* write zero to loc */
|
|
addi r5, r5, 4 /* increment to next loc */
|
|
cmp r6, r5, r4 /* check if we have reach the end */
|
|
bnei r6, 2b
|
|
3: /* jumping to board_init */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
brai board_init_f
|
|
#else
|
|
brai board_init_r
|
|
#endif
|
|
1: bri 1b
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
/*
|
|
* Read 16bit little endian
|
|
*/
|
|
.text
|
|
.global in16
|
|
.ent in16
|
|
.align 2
|
|
in16: lhu r3, r0, r5
|
|
bslli r4, r3, 8
|
|
bsrli r3, r3, 8
|
|
andi r4, r4, 0xffff
|
|
or r3, r3, r4
|
|
rtsd r15, 8
|
|
sext16 r3, r3
|
|
.end in16
|
|
|
|
/*
|
|
* Write 16bit little endian
|
|
* first parameter(r5) - address, second(r6) - short value
|
|
*/
|
|
.text
|
|
.global out16
|
|
.ent out16
|
|
.align 2
|
|
out16: bslli r3, r6, 8
|
|
bsrli r6, r6, 8
|
|
andi r3, r3, 0xffff
|
|
or r3, r3, r6
|
|
sh r3, r0, r5
|
|
rtsd r15, 8
|
|
or r0, r0, r0
|
|
.end out16
|
|
#endif
|