mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
0e9802095d
The pinctrl will default init the io while driver is probe with new pinctrl driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
320 lines
6.4 KiB
C
320 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015 Google, Inc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <ram.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/cru_rk3288.h>
|
|
#include <asm/arch-rockchip/periph.h>
|
|
#include <asm/arch-rockchip/pmu_rk3288.h>
|
|
#include <asm/arch-rockchip/qos_rk3288.h>
|
|
#include <asm/arch-rockchip/boot_mode.h>
|
|
#include <asm/gpio.h>
|
|
#include <dt-bindings/clock/rk3288-cru.h>
|
|
#include <power/regulator.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
__weak int rk_board_late_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int rk3288_qos_init(void)
|
|
{
|
|
int val = 2 << PRIORITY_HIGH_SHIFT | 2 << PRIORITY_LOW_SHIFT;
|
|
/* set vop qos to higher priority */
|
|
writel(val, CPU_AXI_QOS_PRIORITY + VIO0_VOP_QOS);
|
|
writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS);
|
|
|
|
if (!fdt_node_check_compatible(gd->fdt_blob, 0,
|
|
"rockchip,rk3288-tinker"))
|
|
{
|
|
/* set isp qos to higher priority */
|
|
writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS);
|
|
writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W0_QOS);
|
|
writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W1_QOS);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void rk3288_detect_reset_reason(void)
|
|
{
|
|
struct rk3288_cru *cru = rockchip_get_cru();
|
|
const char *reason;
|
|
|
|
if (IS_ERR(cru))
|
|
return;
|
|
|
|
switch (cru->cru_glb_rst_st) {
|
|
case GLB_POR_RST:
|
|
reason = "POR";
|
|
break;
|
|
case FST_GLB_RST_ST:
|
|
case SND_GLB_RST_ST:
|
|
reason = "RST";
|
|
break;
|
|
case FST_GLB_TSADC_RST_ST:
|
|
case SND_GLB_TSADC_RST_ST:
|
|
reason = "THERMAL";
|
|
break;
|
|
case FST_GLB_WDT_RST_ST:
|
|
case SND_GLB_WDT_RST_ST:
|
|
reason = "WDOG";
|
|
break;
|
|
default:
|
|
reason = "unknown reset";
|
|
}
|
|
|
|
env_set("reset_reason", reason);
|
|
|
|
/*
|
|
* Clear cru_glb_rst_st, so we can determine the last reset cause
|
|
* for following resets.
|
|
*/
|
|
rk_clrreg(&cru->cru_glb_rst_st, GLB_RST_ST_MASK);
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
setup_boot_mode();
|
|
rk3288_qos_init();
|
|
rk3288_detect_reset_reason();
|
|
|
|
return rk_board_late_init();
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)
|
|
static int veyron_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
ret = regulator_get_by_platname("vdd_arm", &dev);
|
|
if (ret) {
|
|
debug("Cannot set regulator name\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Slowly raise to max CPU voltage to prevent overshoot */
|
|
ret = regulator_set_value(dev, 1200000);
|
|
if (ret)
|
|
return ret;
|
|
udelay(175); /* Must wait for voltage to stabilize, 2mV/us */
|
|
ret = regulator_set_value(dev, 1400000);
|
|
if (ret)
|
|
return ret;
|
|
udelay(100); /* Must wait for voltage to stabilize, 2mV/us */
|
|
|
|
ret = rockchip_get_clk(&clk.dev);
|
|
if (ret)
|
|
return ret;
|
|
clk.id = PLL_APLL;
|
|
ret = clk_set_rate(&clk, 1800000000);
|
|
if (IS_ERR_VALUE(ret))
|
|
return ret;
|
|
|
|
ret = regulator_get_by_platname("vcc33_sd", &dev);
|
|
if (ret) {
|
|
debug("Cannot get regulator name\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_set_value(dev, 3300000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulators_enable_boot_on(false);
|
|
if (ret) {
|
|
debug("%s: Cannot enable boot on regulators\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)
|
|
return 0;
|
|
#else
|
|
int ret;
|
|
|
|
/* We do some SoC one time setting here */
|
|
if (!fdt_node_check_compatible(gd->fdt_blob, 0, "google,veyron")) {
|
|
ret = veyron_init();
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
|
|
void enable_caches(void)
|
|
{
|
|
/* Enable D-cache. I-cache is already enabled in start.S */
|
|
dcache_enable();
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
|
|
#include <usb.h>
|
|
#include <usb/dwc2_udc.h>
|
|
|
|
static struct dwc2_plat_otg_data rk3288_otg_data = {
|
|
.rx_fifo_sz = 512,
|
|
.np_tx_fifo_sz = 16,
|
|
.tx_fifo_sz = 128,
|
|
};
|
|
|
|
int board_usb_init(int index, enum usb_init_type init)
|
|
{
|
|
int node, phy_node;
|
|
const char *mode;
|
|
bool matched = false;
|
|
const void *blob = gd->fdt_blob;
|
|
u32 grf_phy_offset;
|
|
|
|
/* find the usb_otg node */
|
|
node = fdt_node_offset_by_compatible(blob, -1,
|
|
"rockchip,rk3288-usb");
|
|
|
|
while (node > 0) {
|
|
mode = fdt_getprop(blob, node, "dr_mode", NULL);
|
|
if (mode && strcmp(mode, "otg") == 0) {
|
|
matched = true;
|
|
break;
|
|
}
|
|
|
|
node = fdt_node_offset_by_compatible(blob, node,
|
|
"rockchip,rk3288-usb");
|
|
}
|
|
if (!matched) {
|
|
debug("Not found usb_otg device\n");
|
|
return -ENODEV;
|
|
}
|
|
rk3288_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
|
|
|
|
node = fdtdec_lookup_phandle(blob, node, "phys");
|
|
if (node <= 0) {
|
|
debug("Not found usb phy device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy_node = fdt_parent_offset(blob, node);
|
|
if (phy_node <= 0) {
|
|
debug("Not found usb phy device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
rk3288_otg_data.phy_of_node = phy_node;
|
|
grf_phy_offset = fdtdec_get_addr(blob, node, "reg");
|
|
|
|
/* find the grf node */
|
|
node = fdt_node_offset_by_compatible(blob, -1,
|
|
"rockchip,rk3288-grf");
|
|
if (node <= 0) {
|
|
debug("Not found grf device\n");
|
|
return -ENODEV;
|
|
}
|
|
rk3288_otg_data.regs_phy = grf_phy_offset +
|
|
fdtdec_get_addr(blob, node, "reg");
|
|
|
|
return dwc2_udc_probe(&rk3288_otg_data);
|
|
}
|
|
|
|
int board_usb_cleanup(int index, enum usb_init_type init)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
static const struct {
|
|
char *name;
|
|
int id;
|
|
} clks[] = {
|
|
{ "osc", CLK_OSC },
|
|
{ "apll", CLK_ARM },
|
|
{ "dpll", CLK_DDR },
|
|
{ "cpll", CLK_CODEC },
|
|
{ "gpll", CLK_GENERAL },
|
|
#ifdef CONFIG_ROCKCHIP_RK3036
|
|
{ "mpll", CLK_NEW },
|
|
#else
|
|
{ "npll", CLK_NEW },
|
|
#endif
|
|
};
|
|
int ret, i;
|
|
struct udevice *dev;
|
|
|
|
ret = rockchip_get_clk(&dev);
|
|
if (ret) {
|
|
printf("clk-uclass not found\n");
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(clks); i++) {
|
|
struct clk clk;
|
|
ulong rate;
|
|
|
|
clk.id = clks[i].id;
|
|
ret = clk_request(dev, &clk);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
rate = clk_get_rate(&clk);
|
|
printf("%s: %lu\n", clks[i].name, rate);
|
|
|
|
clk_free(&clk);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
clock, 2, 1, do_clock,
|
|
"display information about clocks",
|
|
""
|
|
);
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
const uintptr_t GRF_SOC_CON0 = 0xff770244;
|
|
const uintptr_t GRF_SOC_CON2 = 0xff77024c;
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
/*
|
|
* This init is done in SPL, but when chain-loading U-Boot SPL will
|
|
* have been skipped. Allow the clock driver to check if it needs
|
|
* setting up.
|
|
*/
|
|
ret = rockchip_get_clk(&dev);
|
|
if (ret) {
|
|
debug("CLK init failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rk_setreg(GRF_SOC_CON2, 1 << 0);
|
|
|
|
/*
|
|
* Disable JTAG on sdmmc0 IO. The SDMMC won't work until this bit is
|
|
* cleared
|
|
*/
|
|
rk_clrreg(GRF_SOC_CON0, 1 << 12);
|
|
|
|
return 0;
|
|
}
|