u-boot/drivers/mtd/spi/sst.c
Mike Frysinger b376bbb49f sf: move useful messages from debug to printf
At the moment, the default SPI flash subsystem is quite terse.  Errors and
successes both result in a generic message.  So move the useful errors and
useful successes to printf output by default.

While we're here, also convert the messages to use print_size().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00

375 lines
7.9 KiB
C

/*
* Driver for SST serial flashes
*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Copyright 2008, Network Appliance Inc.
* Jason McMullan <mcmullan@netapp.com>
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
* Copyright (c) 2008-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <malloc.h>
#include <spi_flash.h>
#include "spi_flash_internal.h"
#define CMD_SST_WREN 0x06 /* Write Enable */
#define CMD_SST_WRDI 0x04 /* Write Disable */
#define CMD_SST_RDSR 0x05 /* Read Status Register */
#define CMD_SST_WRSR 0x01 /* Write Status Register */
#define CMD_SST_READ 0x03 /* Read Data Bytes */
#define CMD_SST_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
#define CMD_SST_BP 0x02 /* Byte Program */
#define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */
#define CMD_SST_SE 0x20 /* Sector Erase */
#define SST_SR_WIP (1 << 0) /* Write-in-Progress */
#define SST_SR_WEL (1 << 1) /* Write enable */
#define SST_SR_BP0 (1 << 2) /* Block Protection 0 */
#define SST_SR_BP1 (1 << 3) /* Block Protection 1 */
#define SST_SR_BP2 (1 << 4) /* Block Protection 2 */
#define SST_SR_AAI (1 << 6) /* Addressing mode */
#define SST_SR_BPL (1 << 7) /* BP bits lock */
struct sst_spi_flash_params {
u8 idcode1;
u16 nr_sectors;
const char *name;
};
struct sst_spi_flash {
struct spi_flash flash;
const struct sst_spi_flash_params *params;
};
static inline struct sst_spi_flash *to_sst_spi_flash(struct spi_flash *flash)
{
return container_of(flash, struct sst_spi_flash, flash);
}
#define SST_SECTOR_SIZE (4 * 1024)
static const struct sst_spi_flash_params sst_spi_flash_table[] = {
{
.idcode1 = 0x8d,
.nr_sectors = 128,
.name = "SST25VF040B",
},{
.idcode1 = 0x8e,
.nr_sectors = 256,
.name = "SST25VF080B",
},{
.idcode1 = 0x41,
.nr_sectors = 512,
.name = "SST25VF016B",
},{
.idcode1 = 0x4a,
.nr_sectors = 1024,
.name = "SST25VF032B",
},{
.idcode1 = 0x01,
.nr_sectors = 16,
.name = "SST25WF512",
},{
.idcode1 = 0x02,
.nr_sectors = 32,
.name = "SST25WF010",
},{
.idcode1 = 0x03,
.nr_sectors = 64,
.name = "SST25WF020",
},{
.idcode1 = 0x04,
.nr_sectors = 128,
.name = "SST25WF040",
},
};
static int
sst_wait_ready(struct spi_flash *flash, unsigned long timeout)
{
struct spi_slave *spi = flash->spi;
unsigned long timebase;
int ret;
u8 byte = CMD_SST_RDSR;
ret = spi_xfer(spi, sizeof(byte) * 8, &byte, NULL, SPI_XFER_BEGIN);
if (ret) {
debug("SF: Failed to send command %02x: %d\n", byte, ret);
return ret;
}
timebase = get_timer(0);
do {
ret = spi_xfer(spi, sizeof(byte) * 8, NULL, &byte, 0);
if (ret)
break;
if ((byte & SST_SR_WIP) == 0)
break;
} while (get_timer(timebase) < timeout);
spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
if (!ret && (byte & SST_SR_WIP) != 0)
ret = -1;
if (ret)
debug("SF: sst wait for ready timed out\n");
return ret;
}
static int
sst_enable_writing(struct spi_flash *flash)
{
int ret = spi_flash_cmd(flash->spi, CMD_SST_WREN, NULL, 0);
if (ret)
debug("SF: Enabling Write failed\n");
return ret;
}
static int
sst_disable_writing(struct spi_flash *flash)
{
int ret = spi_flash_cmd(flash->spi, CMD_SST_WRDI, NULL, 0);
if (ret)
debug("SF: Disabling Write failed\n");
return ret;
}
static int
sst_read_fast(struct spi_flash *flash, u32 offset, size_t len, void *buf)
{
u8 cmd[5] = {
CMD_READ_ARRAY_FAST,
offset >> 16,
offset >> 8,
offset,
0x00,
};
return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
}
static int
sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
{
int ret;
u8 cmd[4] = {
CMD_SST_BP,
offset >> 16,
offset >> 8,
offset,
};
debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
spi_w8r8(flash->spi, CMD_SST_RDSR), buf, cmd[0], offset);
ret = sst_enable_writing(flash);
if (ret)
return ret;
ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1);
if (ret)
return ret;
return sst_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
}
static int
sst_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf)
{
size_t actual, cmd_len;
int ret;
u8 cmd[4];
ret = spi_claim_bus(flash->spi);
if (ret) {
debug("SF: Unable to claim SPI bus\n");
return ret;
}
/* If the data is not word aligned, write out leading single byte */
actual = offset % 2;
if (actual) {
ret = sst_byte_write(flash, offset, buf);
if (ret)
goto done;
}
offset += actual;
ret = sst_enable_writing(flash);
if (ret)
goto done;
cmd_len = 4;
cmd[0] = CMD_SST_AAI_WP;
cmd[1] = offset >> 16;
cmd[2] = offset >> 8;
cmd[3] = offset;
for (; actual < len - 1; actual += 2) {
debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
spi_w8r8(flash->spi, CMD_SST_RDSR), buf + actual, cmd[0],
offset);
ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
buf + actual, 2);
if (ret) {
debug("SF: sst word program failed\n");
break;
}
ret = sst_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
if (ret)
break;
cmd_len = 1;
offset += 2;
}
if (!ret)
ret = sst_disable_writing(flash);
/* If there is a single trailing byte, write it out */
if (!ret && actual != len)
ret = sst_byte_write(flash, offset, buf + actual);
done:
debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
ret ? "failure" : "success", len, offset - actual);
spi_release_bus(flash->spi);
return ret;
}
int
sst_erase(struct spi_flash *flash, u32 offset, size_t len)
{
unsigned long sector_size;
u32 start, end;
int ret;
u8 cmd[4];
/*
* This function currently uses sector erase only.
* Probably speed things up by using bulk erase
* when possible.
*/
sector_size = SST_SECTOR_SIZE;
if (offset % sector_size) {
debug("SF: Erase offset not multiple of sector size\n");
return -1;
}
ret = spi_claim_bus(flash->spi);
if (ret) {
debug("SF: Unable to claim SPI bus\n");
return ret;
}
cmd[0] = CMD_SST_SE;
cmd[3] = 0;
start = offset;
end = start + len;
ret = 0;
while (offset < end) {
cmd[1] = offset >> 16;
cmd[2] = offset >> 8;
offset += sector_size;
debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
cmd[2], cmd[3], offset);
ret = sst_enable_writing(flash);
if (ret)
break;
ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0);
if (ret) {
debug("SF: sst page erase failed\n");
break;
}
ret = sst_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
if (ret)
break;
}
debug("SF: sst: Successfully erased %lu bytes @ 0x%x\n",
len * sector_size, start);
spi_release_bus(flash->spi);
return ret;
}
static int
sst_unlock(struct spi_flash *flash)
{
int ret;
u8 cmd, status;
ret = sst_enable_writing(flash);
if (ret)
return ret;
cmd = CMD_SST_WRSR;
status = 0;
ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &status, 1);
if (ret)
debug("SF: Unable to set status byte\n");
debug("SF: sst: status = %x\n", spi_w8r8(flash->spi, CMD_SST_RDSR));
return ret;
}
struct spi_flash *
spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode)
{
const struct sst_spi_flash_params *params;
struct sst_spi_flash *stm;
size_t i;
for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) {
params = &sst_spi_flash_table[i];
if (params->idcode1 == idcode[2])
break;
}
if (i == ARRAY_SIZE(sst_spi_flash_table)) {
debug("SF: Unsupported SST ID %02x\n", idcode[1]);
return NULL;
}
stm = malloc(sizeof(*stm));
if (!stm) {
debug("SF: Failed to allocate memory\n");
return NULL;
}
stm->params = params;
stm->flash.spi = spi;
stm->flash.name = params->name;
stm->flash.write = sst_write;
stm->flash.erase = sst_erase;
stm->flash.read = sst_read_fast;
stm->flash.size = SST_SECTOR_SIZE * params->nr_sectors;
printf("SF: Detected %s with page size %u, total ",
params->name, SST_SECTOR_SIZE);
print_size(stm->flash.size, "\n");
/* Flash powers up read-only, so clear BP# bits */
sst_unlock(&stm->flash);
return &stm->flash;
}