/* * (C) Copyright 2003 * Texas Instruments. * Kshitij Gupta <kshitij@ti.com> * Configuation settings for the TI OMAP Innovator board. * * (C) Copyright 2004 * ARM Ltd. * Philippe Robin, <philippe.robin@arm.com> * Configuration for Integrator AP board. *. * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H #include "integrator-common.h" /* Integrator/AP-specific configuration */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" #define CONFIG_BOOTCOMMAND "" /* Flash settings */ #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ #define CONFIG_SYS_MAX_FLASH_SECT 128 #define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_SIZE 32768 /*----------------------------------------------------------------------- * PCI definitions */ #define CONFIG_PCI #define CONFIG_CMD_PCI #define CONFIG_PCI_PNP #define CONFIG_TULIP #define CONFIG_EEPRO100 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ /*----------------------------------------------------------------------- * There are various dependencies on the core module (CM) fitted * Users should refer to their CM user guide * - when porting adjust u-boot/Makefile accordingly * to define the necessary CONFIG_ s for the CM involved * see e.g. integratorcp_CM926EJ-S_config */ #include "armcoremodule.h" #endif /* __CONFIG_H */