/* * USB HOST XHCI Controller stack * * Based on xHCI host controller driver in linux-kernel * by Sarah Sharp. * * Copyright (C) 2008 Intel Corp. * Author: Sarah Sharp * * Copyright (C) 2013 Samsung Electronics Co.Ltd * Authors: Vivek Gautam * Vikas Sajjan * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include "xhci.h" /** * Is this TRB a link TRB or was the last TRB the last TRB in this event ring * segment? I.e. would the updated event TRB pointer step off the end of the * event seg ? * * @param ctrl Host controller data structure * @param ring pointer to the ring * @param seg poniter to the segment to which TRB belongs * @param trb poniter to the ring trb * @return 1 if this TRB a link TRB else 0 */ static int last_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring, struct xhci_segment *seg, union xhci_trb *trb) { if (ring == ctrl->event_ring) return trb == &seg->trbs[TRBS_PER_SEGMENT]; else return TRB_TYPE_LINK_LE32(trb->link.control); } /** * Does this link TRB point to the first segment in a ring, * or was the previous TRB the last TRB on the last segment in the ERST? * * @param ctrl Host controller data structure * @param ring pointer to the ring * @param seg poniter to the segment to which TRB belongs * @param trb poniter to the ring trb * @return 1 if this TRB is the last TRB on the last segment else 0 */ static bool last_trb_on_last_seg(struct xhci_ctrl *ctrl, struct xhci_ring *ring, struct xhci_segment *seg, union xhci_trb *trb) { if (ring == ctrl->event_ring) return ((trb == &seg->trbs[TRBS_PER_SEGMENT]) && (seg->next == ring->first_seg)); else return le32_to_cpu(trb->link.control) & LINK_TOGGLE; } /** * See Cycle bit rules. SW is the consumer for the event ring only. * Don't make a ring full of link TRBs. That would be dumb and this would loop. * * If we've just enqueued a TRB that is in the middle of a TD (meaning the * chain bit is set), then set the chain bit in all the following link TRBs. * If we've enqueued the last TRB in a TD, make sure the following link TRBs * have their chain bit cleared (so that each Link TRB is a separate TD). * * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit * set, but other sections talk about dealing with the chain bit set. This was * fixed in the 0.96 specification errata, but we have to assume that all 0.95 * xHCI hardware can't handle the chain bit being cleared on a link TRB. * * @param ctrl Host controller data structure * @param ring pointer to the ring * @param more_trbs_coming flag to indicate whether more trbs * are expected or NOT. * Will you enqueue more TRBs before calling * prepare_ring()? * @return none */ static void inc_enq(struct xhci_ctrl *ctrl, struct xhci_ring *ring, bool more_trbs_coming) { u32 chain; union xhci_trb *next; chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN; next = ++(ring->enqueue); /* * Update the dequeue pointer further if that was a link TRB or we're at * the end of an event ring segment (which doesn't have link TRBS) */ while (last_trb(ctrl, ring, ring->enq_seg, next)) { if (ring != ctrl->event_ring) { /* * If the caller doesn't plan on enqueueing more * TDs before ringing the doorbell, then we * don't want to give the link TRB to the * hardware just yet. We'll give the link TRB * back in prepare_ring() just before we enqueue * the TD at the top of the ring. */ if (!chain && !more_trbs_coming) break; /* * If we're not dealing with 0.95 hardware or * isoc rings on AMD 0.96 host, * carry over the chain bit of the previous TRB * (which may mean the chain bit is cleared). */ next->link.control &= cpu_to_le32(~TRB_CHAIN); next->link.control |= cpu_to_le32(chain); next->link.control ^= cpu_to_le32(TRB_CYCLE); xhci_flush_cache((uintptr_t)next, sizeof(union xhci_trb)); } /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(ctrl, ring, ring->enq_seg, next)) ring->cycle_state = (ring->cycle_state ? 0 : 1); ring->enq_seg = ring->enq_seg->next; ring->enqueue = ring->enq_seg->trbs; next = ring->enqueue; } } /** * See Cycle bit rules. SW is the consumer for the event ring only. * Don't make a ring full of link TRBs. That would be dumb and this would loop. * * @param ctrl Host controller data structure * @param ring Ring whose Dequeue TRB pointer needs to be incremented. * return none */ static void inc_deq(struct xhci_ctrl *ctrl, struct xhci_ring *ring) { do { /* * Update the dequeue pointer further if that was a link TRB or * we're at the end of an event ring segment (which doesn't have * link TRBS) */ if (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue)) { if (ring == ctrl->event_ring && last_trb_on_last_seg(ctrl, ring, ring->deq_seg, ring->dequeue)) { ring->cycle_state = (ring->cycle_state ? 0 : 1); } ring->deq_seg = ring->deq_seg->next; ring->dequeue = ring->deq_seg->trbs; } else { ring->dequeue++; } } while (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue)); } /** * Generic function for queueing a TRB on a ring. * The caller must have checked to make sure there's room on the ring. * * @param more_trbs_coming: Will you enqueue more TRBs before calling * prepare_ring()? * @param ctrl Host controller data structure * @param ring pointer to the ring * @param more_trbs_coming flag to indicate whether more trbs * @param trb_fields pointer to trb field array containing TRB contents * @return pointer to the enqueued trb */ static struct xhci_generic_trb *queue_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring, bool more_trbs_coming, unsigned int *trb_fields) { struct xhci_generic_trb *trb; int i; trb = &ring->enqueue->generic; for (i = 0; i < 4; i++) trb->field[i] = cpu_to_le32(trb_fields[i]); xhci_flush_cache((uintptr_t)trb, sizeof(struct xhci_generic_trb)); inc_enq(ctrl, ring, more_trbs_coming); return trb; } /** * Does various checks on the endpoint ring, and makes it ready * to queue num_trbs. * * @param ctrl Host controller data structure * @param ep_ring pointer to the EP Transfer Ring * @param ep_state State of the End Point * @return error code in case of invalid ep_state, 0 on success */ static int prepare_ring(struct xhci_ctrl *ctrl, struct xhci_ring *ep_ring, u32 ep_state) { union xhci_trb *next = ep_ring->enqueue; /* Make sure the endpoint has been added to xHC schedule */ switch (ep_state) { case EP_STATE_DISABLED: /* * USB core changed config/interfaces without notifying us, * or hardware is reporting the wrong state. */ puts("WARN urb submitted to disabled ep\n"); return -ENOENT; case EP_STATE_ERROR: puts("WARN waiting for error on ep to be cleared\n"); return -EINVAL; case EP_STATE_HALTED: puts("WARN halted endpoint, queueing URB anyway.\n"); case EP_STATE_STOPPED: case EP_STATE_RUNNING: debug("EP STATE RUNNING.\n"); break; default: puts("ERROR unknown endpoint state for ep\n"); return -EINVAL; } while (last_trb(ctrl, ep_ring, ep_ring->enq_seg, next)) { /* * If we're not dealing with 0.95 hardware or isoc rings * on AMD 0.96 host, clear the chain bit. */ next->link.control &= cpu_to_le32(~TRB_CHAIN); next->link.control ^= cpu_to_le32(TRB_CYCLE); xhci_flush_cache((uintptr_t)next, sizeof(union xhci_trb)); /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(ctrl, ep_ring, ep_ring->enq_seg, next)) ep_ring->cycle_state = (ep_ring->cycle_state ? 0 : 1); ep_ring->enq_seg = ep_ring->enq_seg->next; ep_ring->enqueue = ep_ring->enq_seg->trbs; next = ep_ring->enqueue; } return 0; } /** * Generic function for queueing a command TRB on the command ring. * Check to make sure there's room on the command ring for one command TRB. * * @param ctrl Host controller data structure * @param ptr Pointer address to write in the first two fields (opt.) * @param slot_id Slot ID to encode in the flags field (opt.) * @param ep_index Endpoint index to encode in the flags field (opt.) * @param cmd Command type to enqueue * @return none */ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id, u32 ep_index, trb_type cmd) { u32 fields[4]; u64 val_64 = (uintptr_t)ptr; BUG_ON(prepare_ring(ctrl, ctrl->cmd_ring, EP_STATE_RUNNING)); fields[0] = lower_32_bits(val_64); fields[1] = upper_32_bits(val_64); fields[2] = 0; fields[3] = TRB_TYPE(cmd) | EP_ID_FOR_TRB(ep_index) | SLOT_ID_FOR_TRB(slot_id) | ctrl->cmd_ring->cycle_state; queue_trb(ctrl, ctrl->cmd_ring, false, fields); /* Ring the command ring doorbell */ xhci_writel(&ctrl->dba->doorbell[0], DB_VALUE_HOST); } /** * The TD size is the number of bytes remaining in the TD (including this TRB), * right shifted by 10. * It must fit in bits 21:17, so it can't be bigger than 31. * * @param remainder remaining packets to be sent * @return remainder if remainder is less than max else max */ static u32 xhci_td_remainder(unsigned int remainder) { u32 max = (1 << (21 - 17 + 1)) - 1; if ((remainder >> 10) >= max) return max << 17; else return (remainder >> 10) << 17; } /** * Finds out the remanining packets to be sent * * @param running_total total size sent so far * @param trb_buff_len length of the TRB Buffer * @param total_packet_count total packet count * @param maxpacketsize max packet size of current pipe * @param num_trbs_left number of TRBs left to be processed * @return 0 if running_total or trb_buff_len is 0, else remainder */ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len, unsigned int total_packet_count, int maxpacketsize, unsigned int num_trbs_left) { int packets_transferred; /* One TRB with a zero-length data packet. */ if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0)) return 0; /* * All the TRB queueing functions don't count the current TRB in * running_total. */ packets_transferred = (running_total + trb_buff_len) / maxpacketsize; if ((total_packet_count - packets_transferred) > 31) return 31 << 17; return (total_packet_count - packets_transferred) << 17; } /** * Ring the doorbell of the End Point * * @param udev pointer to the USB device structure * @param ep_index index of the endpoint * @param start_cycle cycle flag of the first TRB * @param start_trb pionter to the first TRB * @return none */ static void giveback_first_trb(struct usb_device *udev, int ep_index, int start_cycle, struct xhci_generic_trb *start_trb) { struct xhci_ctrl *ctrl = udev->controller; /* * Pass all the TRBs to the hardware at once and make sure this write * isn't reordered. */ if (start_cycle) start_trb->field[3] |= cpu_to_le32(start_cycle); else start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); xhci_flush_cache((uintptr_t)start_trb, sizeof(struct xhci_generic_trb)); /* Ringing EP doorbell here */ xhci_writel(&ctrl->dba->doorbell[udev->slot_id], DB_VALUE(ep_index, 0)); return; } /**** POLLING mechanism for XHCI ****/ /** * Finalizes a handled event TRB by advancing our dequeue pointer and giving * the TRB back to the hardware for recycling. Must call this exactly once at * the end of each event handler, and not touch the TRB again afterwards. * * @param ctrl Host controller data structure * @return none */ void xhci_acknowledge_event(struct xhci_ctrl *ctrl) { /* Advance our dequeue pointer to the next event */ inc_deq(ctrl, ctrl->event_ring); /* Inform the hardware */ xhci_writeq(&ctrl->ir_set->erst_dequeue, (uintptr_t)ctrl->event_ring->dequeue | ERST_EHB); } /** * Checks if there is a new event to handle on the event ring. * * @param ctrl Host controller data structure * @return 0 if failure else 1 on success */ static int event_ready(struct xhci_ctrl *ctrl) { union xhci_trb *event; xhci_inval_cache((uintptr_t)ctrl->event_ring->dequeue, sizeof(union xhci_trb)); event = ctrl->event_ring->dequeue; /* Does the HC or OS own the TRB? */ if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) != ctrl->event_ring->cycle_state) return 0; return 1; } /** * Waits for a specific type of event and returns it. Discards unexpected * events. Caller *must* call xhci_acknowledge_event() after it is finished * processing the event, and must not access the returned pointer afterwards. * * @param ctrl Host controller data structure * @param expected TRB type expected from Event TRB * @return pointer to event trb */ union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected) { trb_type type; unsigned long ts = get_timer(0); do { union xhci_trb *event = ctrl->event_ring->dequeue; if (!event_ready(ctrl)) continue; type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags)); if (type == expected) return event; if (type == TRB_PORT_STATUS) /* TODO: remove this once enumeration has been reworked */ /* * Port status change events always have a * successful completion code */ BUG_ON(GET_COMP_CODE( le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS); else printf("Unexpected XHCI event TRB, skipping... " "(%08x %08x %08x %08x)\n", le32_to_cpu(event->generic.field[0]), le32_to_cpu(event->generic.field[1]), le32_to_cpu(event->generic.field[2]), le32_to_cpu(event->generic.field[3])); xhci_acknowledge_event(ctrl); } while (get_timer(ts) < XHCI_TIMEOUT); if (expected == TRB_TRANSFER) return NULL; printf("XHCI timeout on event type %d... cannot recover.\n", expected); BUG(); } /* * Stops transfer processing for an endpoint and throws away all unprocessed * TRBs by setting the xHC's dequeue pointer to our enqueue pointer. The next * xhci_bulk_tx/xhci_ctrl_tx on this enpoint will add new transfers there and * ring the doorbell, causing this endpoint to start working again. * (Careful: This will BUG() when there was no transfer in progress. Shouldn't * happen in practice for current uses and is too complicated to fix right now.) */ static void abort_td(struct usb_device *udev, int ep_index) { struct xhci_ctrl *ctrl = udev->controller; struct xhci_ring *ring = ctrl->devs[udev->slot_id]->eps[ep_index].ring; union xhci_trb *event; u32 field; xhci_queue_command(ctrl, NULL, udev->slot_id, ep_index, TRB_STOP_RING); event = xhci_wait_for_event(ctrl, TRB_TRANSFER); field = le32_to_cpu(event->trans_event.flags); BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id); BUG_ON(TRB_TO_EP_INDEX(field) != ep_index); BUG_ON(GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len != COMP_STOP))); xhci_acknowledge_event(ctrl); event = xhci_wait_for_event(ctrl, TRB_COMPLETION); BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) != udev->slot_id || GET_COMP_CODE(le32_to_cpu( event->event_cmd.status)) != COMP_SUCCESS); xhci_acknowledge_event(ctrl); xhci_queue_command(ctrl, (void *)((uintptr_t)ring->enqueue | ring->cycle_state), udev->slot_id, ep_index, TRB_SET_DEQ); event = xhci_wait_for_event(ctrl, TRB_COMPLETION); BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) != udev->slot_id || GET_COMP_CODE(le32_to_cpu( event->event_cmd.status)) != COMP_SUCCESS); xhci_acknowledge_event(ctrl); } static void record_transfer_result(struct usb_device *udev, union xhci_trb *event, int length) { udev->act_len = min(length, length - (int)EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len))); switch (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))) { case COMP_SUCCESS: BUG_ON(udev->act_len != length); /* fallthrough */ case COMP_SHORT_TX: udev->status = 0; break; case COMP_STALL: udev->status = USB_ST_STALLED; break; case COMP_DB_ERR: case COMP_TRB_ERR: udev->status = USB_ST_BUF_ERR; break; case COMP_BABBLE: udev->status = USB_ST_BABBLE_DET; break; default: udev->status = 0x80; /* USB_ST_TOO_LAZY_TO_MAKE_A_NEW_MACRO */ } } /**** Bulk and Control transfer methods ****/ /** * Queues up the BULK Request * * @param udev pointer to the USB device structure * @param pipe contains the DIR_IN or OUT , devnum * @param length length of the buffer * @param buffer buffer to be read/written based on the request * @return returns 0 if successful else -1 on failure */ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe, int length, void *buffer) { int num_trbs = 0; struct xhci_generic_trb *start_trb; bool first_trb = 0; int start_cycle; u32 field = 0; u32 length_field = 0; struct xhci_ctrl *ctrl = udev->controller; int slot_id = udev->slot_id; int ep_index; struct xhci_virt_device *virt_dev; struct xhci_ep_ctx *ep_ctx; struct xhci_ring *ring; /* EP transfer ring */ union xhci_trb *event; int running_total, trb_buff_len; unsigned int total_packet_count; int maxpacketsize; u64 addr; int ret; u32 trb_fields[4]; u64 val_64 = (uintptr_t)buffer; debug("dev=%p, pipe=%lx, buffer=%p, length=%d\n", udev, pipe, buffer, length); ep_index = usb_pipe_ep_index(pipe); virt_dev = ctrl->devs[slot_id]; xhci_inval_cache((uintptr_t)virt_dev->out_ctx->bytes, virt_dev->out_ctx->size); ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index); ring = virt_dev->eps[ep_index].ring; /* * How much data is (potentially) left before the 64KB boundary? * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec) * that the buffer should not span 64KB boundary. if so * we send request in more than 1 TRB by chaining them. */ running_total = TRB_MAX_BUFF_SIZE - (lower_32_bits(val_64) & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = running_total; running_total &= TRB_MAX_BUFF_SIZE - 1; /* * If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB */ if (running_total != 0 || length == 0) num_trbs++; /* How many more 64KB chunks to transfer, how many more TRBs? */ while (running_total < length) { num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } /* * XXX: Calling routine prepare_ring() called in place of * prepare_trasfer() as there in 'Linux' since we are not * maintaining multiple TDs/transfer at the same time. */ ret = prepare_ring(ctrl, ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK); if (ret < 0) return ret; /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle * state may change as we enqueue the other TRBs, so save it too. */ start_trb = &ring->enqueue->generic; start_cycle = ring->cycle_state; running_total = 0; maxpacketsize = usb_maxpacket(udev, pipe); total_packet_count = DIV_ROUND_UP(length, maxpacketsize); /* How much data is in the first TRB? */ /* * How much data is (potentially) left before the 64KB boundary? * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec) * that the buffer should not span 64KB boundary. if so * we send request in more than 1 TRB by chaining them. */ addr = val_64; if (trb_buff_len > length) trb_buff_len = length; first_trb = true; /* flush the buffer before use */ xhci_flush_cache((uintptr_t)buffer, length); /* Queue the first TRB, even if it's zero-length */ do { u32 remainder = 0; field = 0; /* Don't change the cycle bit of the first TRB until later */ if (first_trb) { first_trb = false; if (start_cycle == 0) field |= TRB_CYCLE; } else { field |= ring->cycle_state; } /* * Chain all the TRBs together; clear the chain bit in the last * TRB to indicate it's the last TRB in the chain. */ if (num_trbs > 1) field |= TRB_CHAIN; else field |= TRB_IOC; /* Only set interrupt on short packet for IN endpoints */ if (usb_pipein(pipe)) field |= TRB_ISP; /* Set the TRB length, TD size, and interrupter fields. */ if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) < 0x100) remainder = xhci_td_remainder(length - running_total); else remainder = xhci_v1_0_td_remainder(running_total, trb_buff_len, total_packet_count, maxpacketsize, num_trbs - 1); length_field = ((trb_buff_len & TRB_LEN_MASK) | remainder | ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT)); trb_fields[0] = lower_32_bits(addr); trb_fields[1] = upper_32_bits(addr); trb_fields[2] = length_field; trb_fields[3] = field | (TRB_NORMAL << TRB_TYPE_SHIFT); queue_trb(ctrl, ring, (num_trbs > 1), trb_fields); --num_trbs; running_total += trb_buff_len; /* Calculate length for next transfer */ addr += trb_buff_len; trb_buff_len = min((length - running_total), TRB_MAX_BUFF_SIZE); } while (running_total < length); giveback_first_trb(udev, ep_index, start_cycle, start_trb); event = xhci_wait_for_event(ctrl, TRB_TRANSFER); if (!event) { debug("XHCI bulk transfer timed out, aborting...\n"); abort_td(udev, ep_index); udev->status = USB_ST_NAK_REC; /* closest thing to a timeout */ udev->act_len = 0; return -ETIMEDOUT; } field = le32_to_cpu(event->trans_event.flags); BUG_ON(TRB_TO_SLOT_ID(field) != slot_id); BUG_ON(TRB_TO_EP_INDEX(field) != ep_index); BUG_ON(*(void **)(uintptr_t)le64_to_cpu(event->trans_event.buffer) - buffer > (size_t)length); record_transfer_result(udev, event, length); xhci_acknowledge_event(ctrl); xhci_inval_cache((uintptr_t)buffer, length); return (udev->status != USB_ST_NOT_PROC) ? 0 : -1; } /** * Queues up the Control Transfer Request * * @param udev pointer to the USB device structure * @param pipe contains the DIR_IN or OUT , devnum * @param req request type * @param length length of the buffer * @param buffer buffer to be read/written based on the request * @return returns 0 if successful else error code on failure */ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe, struct devrequest *req, int length, void *buffer) { int ret; int start_cycle; int num_trbs; u32 field; u32 length_field; u64 buf_64 = 0; struct xhci_generic_trb *start_trb; struct xhci_ctrl *ctrl = udev->controller; int slot_id = udev->slot_id; int ep_index; u32 trb_fields[4]; struct xhci_virt_device *virt_dev = ctrl->devs[slot_id]; struct xhci_ring *ep_ring; union xhci_trb *event; debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n", req->request, req->request, req->requesttype, req->requesttype, le16_to_cpu(req->value), le16_to_cpu(req->value), le16_to_cpu(req->index)); ep_index = usb_pipe_ep_index(pipe); ep_ring = virt_dev->eps[ep_index].ring; /* * Check to see if the max packet size for the default control * endpoint changed during FS device enumeration */ if (udev->speed == USB_SPEED_FULL) { ret = xhci_check_maxpacket(udev); if (ret < 0) return ret; } xhci_inval_cache((uintptr_t)virt_dev->out_ctx->bytes, virt_dev->out_ctx->size); struct xhci_ep_ctx *ep_ctx = NULL; ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index); /* 1 TRB for setup, 1 for status */ num_trbs = 2; /* * Don't need to check if we need additional event data and normal TRBs, * since data in control transfers will never get bigger than 16MB * XXX: can we get a buffer that crosses 64KB boundaries? */ if (length > 0) num_trbs++; /* * XXX: Calling routine prepare_ring() called in place of * prepare_trasfer() as there in 'Linux' since we are not * maintaining multiple TDs/transfer at the same time. */ ret = prepare_ring(ctrl, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK); if (ret < 0) return ret; /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle * state may change as we enqueue the other TRBs, so save it too. */ start_trb = &ep_ring->enqueue->generic; start_cycle = ep_ring->cycle_state; debug("start_trb %p, start_cycle %d\n", start_trb, start_cycle); /* Queue setup TRB - see section 6.4.1.2.1 */ /* FIXME better way to translate setup_packet into two u32 fields? */ field = 0; field |= TRB_IDT | (TRB_SETUP << TRB_TYPE_SHIFT); if (start_cycle == 0) field |= 0x1; /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) == 0x100) { if (length > 0) { if (req->requesttype & USB_DIR_IN) field |= (TRB_DATA_IN << TRB_TX_TYPE_SHIFT); else field |= (TRB_DATA_OUT << TRB_TX_TYPE_SHIFT); } } debug("req->requesttype = %d, req->request = %d," "le16_to_cpu(req->value) = %d," "le16_to_cpu(req->index) = %d," "le16_to_cpu(req->length) = %d\n", req->requesttype, req->request, le16_to_cpu(req->value), le16_to_cpu(req->index), le16_to_cpu(req->length)); trb_fields[0] = req->requesttype | req->request << 8 | le16_to_cpu(req->value) << 16; trb_fields[1] = le16_to_cpu(req->index) | le16_to_cpu(req->length) << 16; /* TRB_LEN | (TRB_INTR_TARGET) */ trb_fields[2] = (8 | ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT)); /* Immediate data in pointer */ trb_fields[3] = field; queue_trb(ctrl, ep_ring, true, trb_fields); /* Re-initializing field to zero */ field = 0; /* If there's data, queue data TRBs */ /* Only set interrupt on short packet for IN endpoints */ if (usb_pipein(pipe)) field = TRB_ISP | (TRB_DATA << TRB_TYPE_SHIFT); else field = (TRB_DATA << TRB_TYPE_SHIFT); length_field = (length & TRB_LEN_MASK) | xhci_td_remainder(length) | ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT); debug("length_field = %d, length = %d," "xhci_td_remainder(length) = %d , TRB_INTR_TARGET(0) = %d\n", length_field, (length & TRB_LEN_MASK), xhci_td_remainder(length), 0); if (length > 0) { if (req->requesttype & USB_DIR_IN) field |= TRB_DIR_IN; buf_64 = (uintptr_t)buffer; trb_fields[0] = lower_32_bits(buf_64); trb_fields[1] = upper_32_bits(buf_64); trb_fields[2] = length_field; trb_fields[3] = field | ep_ring->cycle_state; xhci_flush_cache((uintptr_t)buffer, length); queue_trb(ctrl, ep_ring, true, trb_fields); } /* * Queue status TRB - * see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */ /* If the device sent data, the status stage is an OUT transfer */ field = 0; if (length > 0 && req->requesttype & USB_DIR_IN) field = 0; else field = TRB_DIR_IN; trb_fields[0] = 0; trb_fields[1] = 0; trb_fields[2] = ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT); /* Event on completion */ trb_fields[3] = field | TRB_IOC | (TRB_STATUS << TRB_TYPE_SHIFT) | ep_ring->cycle_state; queue_trb(ctrl, ep_ring, false, trb_fields); giveback_first_trb(udev, ep_index, start_cycle, start_trb); event = xhci_wait_for_event(ctrl, TRB_TRANSFER); if (!event) goto abort; field = le32_to_cpu(event->trans_event.flags); BUG_ON(TRB_TO_SLOT_ID(field) != slot_id); BUG_ON(TRB_TO_EP_INDEX(field) != ep_index); record_transfer_result(udev, event, length); xhci_acknowledge_event(ctrl); /* Invalidate buffer to make it available to usb-core */ if (length > 0) xhci_inval_cache((uintptr_t)buffer, length); if (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len)) == COMP_SHORT_TX) { /* Short data stage, clear up additional status stage event */ event = xhci_wait_for_event(ctrl, TRB_TRANSFER); if (!event) goto abort; BUG_ON(TRB_TO_SLOT_ID(field) != slot_id); BUG_ON(TRB_TO_EP_INDEX(field) != ep_index); xhci_acknowledge_event(ctrl); } return (udev->status != USB_ST_NOT_PROC) ? 0 : -1; abort: debug("XHCI control transfer timed out, aborting...\n"); abort_td(udev, ep_index); udev->status = USB_ST_NAK_REC; udev->act_len = 0; return -ETIMEDOUT; }