/* SPDX-License-Identifier: GPL-2.0+ */ /* * LG Optimus Black codename sniper config * * Copyright (C) 2015 Paul Kocialkowski */ #ifndef __CONFIG_H #define __CONFIG_H #include #include /* * Clocks */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 #define V_NS16550_CLK 48000000 #define V_OSCK 26000000 #define V_SCLK (V_OSCK >> 1) /* * DRAM */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* * Memory */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) /* * I2C */ #define CONFIG_I2C_MULTI_BUS /* * Input */ /* * SPL */ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_CBSIZE 512 /* * Serial */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #endif #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \ 115200 } /* * Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x82000000\0" \ "loadaddr=0x82000000\0" \ "fdt_addr_r=0x88000000\0" \ "fdtaddr=0x88000000\0" \ "ramdisk_addr_r=0x88080000\0" \ "pxefile_addr_r=0x80100000\0" \ "scriptaddr=0x80000000\0" \ "bootm_size=0x10000000\0" \ "boot_mmc_dev=0\0" \ "kernel_mmc_part=3\0" \ "recovery_mmc_part=4\0" \ "fdtfile=omap3-sniper.dtb\0" \ "bootfile=/boot/extlinux/extlinux.conf\0" \ "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0" /* * ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG #define CONFIG_SERIAL_TAG /* * Boot */ #define CONFIG_BOOTCOMMAND \ "setenv boot_mmc_part ${kernel_mmc_part}; " \ "if test reboot-${reboot-mode} = reboot-r; then " \ "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \ "if test reboot-${reboot-mode} = reboot-b; then " \ "echo fastboot; fastboot 0; fi; " \ "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \ "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \ "mmc dev ${boot_mmc_dev}; " \ "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \ "bootm ${kernel_addr_r};" #endif