// SPDX-License-Identifier: GPL-2.0 /* * board/renesas/lager/lager_spl.c * * Copyright (C) 2018 Marek Vasut */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define TMU0_MSTP125 BIT(25) #define SCIF0_MSTP721 BIT(21) #define QSPI_MSTP917 BIT(17) #define SD2CKCR 0xE615026C #define SD_97500KHZ 0x7 struct reg_config { u16 off; u32 val; }; static void dbsc_wait(u16 reg) { static const u32 dbsc3_0_base = DBSC3_0_BASE; while (!(readl(dbsc3_0_base + reg) & BIT(0))) ; } static void spl_init_sys(void) { u32 r0 = 0; writel(0xa5a5a500, 0xe6020004); writel(0xa5a5a500, 0xe6030004); asm volatile( /* ICIALLU - Invalidate I$ to PoU */ "mcr 15, 0, %0, cr7, cr5, 0 \n" /* BPIALL - Invalidate branch predictors */ "mcr 15, 0, %0, cr7, cr5, 6 \n" /* Set SCTLR[IZ] */ "mrc 15, 0, %0, cr1, cr0, 0 \n" "orr %0, #0x1800 \n" "mcr 15, 0, %0, cr1, cr0, 0 \n" "isb sy \n" :"=r"(r0)); } static void spl_init_pfc(void) { static const struct reg_config pfc_with_unlock[] = { { 0x0090, 0x00000000 }, { 0x0094, 0x00000000 }, { 0x0098, 0xc0000000 }, { 0x0020, 0x00000000 }, { 0x0024, 0x00000000 }, { 0x0028, 0x00000000 }, { 0x002c, 0x20000000 }, { 0x0030, 0x00001249 }, { 0x0034, 0x00000278 }, { 0x0038, 0x00000841 }, { 0x003c, 0x00000000 }, { 0x0040, 0x00000000 }, { 0x0044, 0x10000000 }, { 0x0048, 0x00000001 }, { 0x004c, 0x0004aab0 }, { 0x0050, 0x37301b00 }, { 0x0054, 0x00048da3 }, { 0x0058, 0x089044a1 }, { 0x005c, 0x2a3a55b4 }, { 0x0160, 0x00000003 }, { 0x0004, 0xffffffff }, { 0x0008, 0x2aef3fff }, { 0x000c, 0x3fffffff }, { 0x0010, 0xff7fc07f }, { 0x0014, 0x7f3ff3f8 }, { 0x0018, 0x1cfdfff7 }, }; static const struct reg_config pfc_without_unlock[] = { { 0x0100, 0x1fffffff }, { 0x0104, 0xffff0318 }, { 0x0108, 0x387fffe1 }, { 0x010c, 0x00803f80 }, { 0x0110, 0x1520009f }, { 0x0114, 0x00000000 }, { 0x0118, 0x00000000 }, }; static const u32 pfc_base = 0xe6060000; unsigned int i; for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) { writel(~pfc_with_unlock[i].val, pfc_base); writel(pfc_with_unlock[i].val, pfc_base | pfc_with_unlock[i].off); } for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++) writel(pfc_without_unlock[i].val, pfc_base | pfc_without_unlock[i].off); } static void spl_init_gpio(void) { static const u16 gpio_offs[] = { 0x1000, 0x3000, 0x4000, 0x5000 }; static const struct reg_config gpio_set[] = { { 0x4000, 0x00c00000 }, { 0x5000, 0x63020000 }, }; static const struct reg_config gpio_clr[] = { { 0x1000, 0x00000000 }, { 0x3000, 0x00000000 }, { 0x4000, 0x00c00000 }, { 0x5000, 0xe3020000 }, }; static const u32 gpio_base = 0xe6050000; unsigned int i; for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) writel(0, gpio_base | 0x20 | gpio_offs[i]); for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) writel(0, gpio_base | 0x00 | gpio_offs[i]); for (i = 0; i < ARRAY_SIZE(gpio_set); i++) writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off); for (i = 0; i < ARRAY_SIZE(gpio_clr); i++) writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); } static void spl_init_lbsc(void) { static const struct reg_config lbsc_config[] = { { 0x00, 0x00000020 }, { 0x08, 0x00002020 }, { 0x30, 0x02150326 }, { 0x38, 0x077f077f }, }; static const u16 lbsc_offs[] = { 0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8, 0x180 }; static const u32 lbsc_base = 0xfec00200; unsigned int i; for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) { writel(lbsc_config[i].val, lbsc_base | lbsc_config[i].off); writel(lbsc_config[i].val, lbsc_base | (lbsc_config[i].off + 4)); } for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++) writel(0, lbsc_base | lbsc_offs[i]); } static void spl_init_dbsc(void) { static const struct reg_config dbsc_config1[] = { { 0x0018, 0x21000000 }, { 0x0018, 0x11000000 }, { 0x0018, 0x10000000 }, { 0x0280, 0x0000a55a }, { 0x0290, 0x00000001 }, { 0x02a0, 0x80000000 }, { 0x0290, 0x00000004 }, }; static const struct reg_config dbsc_config4[] = { { 0x0290, 0x00000010 }, { 0x02a0, 0xf004649b }, { 0x0290, 0x0000000f }, { 0x02a0, 0x00181ee4 }, { 0x0290, 0x00000060 }, { 0x02a0, 0x330657b2 }, { 0x0290, 0x00000001 }, { 0x02a0, 0x00000071 }, { 0x0020, 0x00000007 }, { 0x0024, 0x10030a02 }, { 0x0030, 0x00000001 }, { 0x00b0, 0x00000000 }, { 0x0040, 0x0000000b }, { 0x0044, 0x00000008 }, { 0x0048, 0x00000000 }, { 0x0050, 0x0000000b }, { 0x0054, 0x000c000b }, { 0x0058, 0x00000027 }, { 0x005c, 0x0000001c }, { 0x0060, 0x00000005 }, { 0x0064, 0x00000018 }, { 0x0068, 0x00000008 }, { 0x006c, 0x0000000c }, { 0x0070, 0x00000009 }, { 0x0074, 0x00000012 }, { 0x0078, 0x000000d0 }, { 0x007c, 0x00140005 }, { 0x0080, 0x00050004 }, { 0x0084, 0x70233005 }, { 0x0088, 0x000c0000 }, { 0x008c, 0x00000300 }, { 0x0090, 0x00000040 }, { 0x0100, 0x00000001 }, { 0x00c0, 0x00020001 }, { 0x00c8, 0x20082008 }, { 0x0380, 0x00020002 }, { 0x0390, 0x0000000f }, }; static const struct reg_config dbsc_config5[] = { { 0x0244, 0x00000011 }, { 0x0290, 0x00000006 }, { 0x02a0, 0x0005c000 }, { 0x0290, 0x00000003 }, { 0x02a0, 0x0300c481 }, { 0x0290, 0x00000023 }, { 0x02a0, 0x00fdb6c0 }, { 0x0290, 0x00000011 }, { 0x02a0, 0x1000040b }, { 0x0290, 0x00000012 }, { 0x02a0, 0x9d5cbb66 }, { 0x0290, 0x00000013 }, { 0x02a0, 0x1a868300 }, { 0x0290, 0x00000014 }, { 0x02a0, 0x300214d8 }, { 0x0290, 0x00000015 }, { 0x02a0, 0x00000d70 }, { 0x0290, 0x00000016 }, { 0x02a0, 0x00000006 }, { 0x0290, 0x00000017 }, { 0x02a0, 0x00000018 }, { 0x0290, 0x0000001a }, { 0x02a0, 0x910035c7 }, { 0x0290, 0x00000004 }, }; static const struct reg_config dbsc_config6[] = { { 0x0290, 0x00000001 }, { 0x02a0, 0x00000181 }, { 0x0018, 0x11000000 }, { 0x0290, 0x00000004 }, }; static const struct reg_config dbsc_config7[] = { { 0x0290, 0x00000001 }, { 0x02a0, 0x0000fe01 }, { 0x0290, 0x00000004 }, }; static const struct reg_config dbsc_config8[] = { { 0x0304, 0x00000000 }, { 0x00f4, 0x01004c20 }, { 0x00f8, 0x014000aa }, { 0x00e0, 0x00000140 }, { 0x00e4, 0x00081860 }, { 0x00e8, 0x00010000 }, { 0x0014, 0x00000001 }, { 0x0010, 0x00000001 }, { 0x0280, 0x00000000 }, }; static const u32 dbsc3_0_base = DBSC3_0_BASE; unsigned int i; for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++) writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off); dbsc_wait(0x2a0); for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++) writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off); dbsc_wait(0x240); for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++) writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off); dbsc_wait(0x2a0); for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++) writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off); dbsc_wait(0x2a0); for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++) writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off); dbsc_wait(0x2a0); for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++) writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off); } static void spl_init_qspi(void) { mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); static const u32 qspi_base = 0xe6b10000; writeb(0x08, qspi_base + 0x00); writeb(0x00, qspi_base + 0x01); writeb(0x06, qspi_base + 0x02); writeb(0x01, qspi_base + 0x0a); writeb(0x00, qspi_base + 0x0b); writeb(0x00, qspi_base + 0x0c); writeb(0x00, qspi_base + 0x0d); writeb(0x00, qspi_base + 0x0e); writew(0xe080, qspi_base + 0x10); writeb(0xc0, qspi_base + 0x18); writeb(0x00, qspi_base + 0x18); writeb(0x00, qspi_base + 0x08); writeb(0x48, qspi_base + 0x00); } void board_init_f(ulong dummy) { mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); /* * SD0 clock is set to 97.5MHz by default. * Set SD2 to the 97.5MHz as well. */ writel(SD_97500KHZ, SD2CKCR); spl_init_sys(); spl_init_pfc(); spl_init_gpio(); spl_init_lbsc(); spl_init_dbsc(); spl_init_qspi(); } void spl_board_init(void) { /* UART clocks enabled and gd valid - init serial console */ preloader_console_init(); } void board_boot_order(u32 *spl_boot_list) { const u32 jtag_magic = 0x1337c0de; const u32 load_magic = 0xb33fc0de; /* * If JTAG probe sets special word at 0xe6300020, then it must * put U-Boot into RAM and SPL will start it from RAM. */ if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { printf("JTAG boot detected!\n"); while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) ; spl_boot_list[0] = BOOT_DEVICE_RAM; spl_boot_list[1] = BOOT_DEVICE_NONE; return; } /* Boot from SPI NOR with YMODEM UART fallback. */ spl_boot_list[0] = BOOT_DEVICE_SPI; spl_boot_list[1] = BOOT_DEVICE_UART; spl_boot_list[2] = BOOT_DEVICE_NONE; } void reset_cpu(ulong addr) { }