/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2009 * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. */ #ifndef __DW_UDC_H #define __DW_UDC_H /* * Defines for USBD * * The udc_ahb controller has three AHB slaves: * * 1. THe UDC registers * 2. The plug detect * 3. The RX/TX FIFO */ #define MAX_ENDPOINTS 16 struct udc_endp_regs { u32 endp_cntl; u32 endp_status; u32 endp_bsorfn; u32 endp_maxpacksize; u32 reserved_1; u32 endp_desc_point; u32 reserved_2; u32 write_done; }; /* Endpoint Control Register definitions */ #define ENDP_CNTL_STALL 0x00000001 #define ENDP_CNTL_FLUSH 0x00000002 #define ENDP_CNTL_SNOOP 0x00000004 #define ENDP_CNTL_POLL 0x00000008 #define ENDP_CNTL_CONTROL 0x00000000 #define ENDP_CNTL_ISO 0x00000010 #define ENDP_CNTL_BULK 0x00000020 #define ENDP_CNTL_INT 0x00000030 #define ENDP_CNTL_NAK 0x00000040 #define ENDP_CNTL_SNAK 0x00000080 #define ENDP_CNTL_CNAK 0x00000100 #define ENDP_CNTL_RRDY 0x00000200 /* Endpoint Satus Register definitions */ #define ENDP_STATUS_PIDMSK 0x0000000f #define ENDP_STATUS_OUTMSK 0x00000030 #define ENDP_STATUS_OUT_NONE 0x00000000 #define ENDP_STATUS_OUT_DATA 0x00000010 #define ENDP_STATUS_OUT_SETUP 0x00000020 #define ENDP_STATUS_IN 0x00000040 #define ENDP_STATUS_BUFFNAV 0x00000080 #define ENDP_STATUS_FATERR 0x00000100 #define ENDP_STATUS_HOSTBUSERR 0x00000200 #define ENDP_STATUS_TDC 0x00000400 #define ENDP_STATUS_RXPKTMSK 0x003ff800 struct udc_regs { struct udc_endp_regs in_regs[MAX_ENDPOINTS]; struct udc_endp_regs out_regs[MAX_ENDPOINTS]; u32 dev_conf; u32 dev_cntl; u32 dev_stat; u32 dev_int; u32 dev_int_mask; u32 endp_int; u32 endp_int_mask; u32 reserved_3[0x39]; u32 reserved_4; /* offset 0x500 */ u32 udc_endp_reg[MAX_ENDPOINTS]; }; /* Device Configuration Register definitions */ #define DEV_CONF_HS_SPEED 0x00000000 #define DEV_CONF_LS_SPEED 0x00000002 #define DEV_CONF_FS_SPEED 0x00000003 #define DEV_CONF_REMWAKEUP 0x00000004 #define DEV_CONF_SELFPOW 0x00000008 #define DEV_CONF_SYNCFRAME 0x00000010 #define DEV_CONF_PHYINT_8 0x00000020 #define DEV_CONF_PHYINT_16 0x00000000 #define DEV_CONF_UTMI_BIDIR 0x00000040 #define DEV_CONF_STATUS_STALL 0x00000080 /* Device Control Register definitions */ #define DEV_CNTL_RESUME 0x00000001 #define DEV_CNTL_TFFLUSH 0x00000002 #define DEV_CNTL_RXDMAEN 0x00000004 #define DEV_CNTL_TXDMAEN 0x00000008 #define DEV_CNTL_DESCRUPD 0x00000010 #define DEV_CNTL_BIGEND 0x00000020 #define DEV_CNTL_BUFFILL 0x00000040 #define DEV_CNTL_TSHLDEN 0x00000080 #define DEV_CNTL_BURSTEN 0x00000100 #define DEV_CNTL_DMAMODE 0x00000200 #define DEV_CNTL_SOFTDISCONNECT 0x00000400 #define DEV_CNTL_SCALEDOWN 0x00000800 #define DEV_CNTL_BURSTLENU 0x00010000 #define DEV_CNTL_BURSTLENMSK 0x00ff0000 #define DEV_CNTL_TSHLDLENU 0x01000000 #define DEV_CNTL_TSHLDLENMSK 0xff000000 /* Device Status Register definitions */ #define DEV_STAT_CFG 0x0000000f #define DEV_STAT_INTF 0x000000f0 #define DEV_STAT_ALT 0x00000f00 #define DEV_STAT_SUSP 0x00001000 #define DEV_STAT_ENUM 0x00006000 #define DEV_STAT_ENUM_SPEED_HS 0x00000000 #define DEV_STAT_ENUM_SPEED_FS 0x00002000 #define DEV_STAT_ENUM_SPEED_LS 0x00004000 #define DEV_STAT_RXFIFO_EMPTY 0x00008000 #define DEV_STAT_PHY_ERR 0x00010000 #define DEV_STAT_TS 0xf0000000 /* Device Interrupt Register definitions */ #define DEV_INT_MSK 0x0000007f #define DEV_INT_SETCFG 0x00000001 #define DEV_INT_SETINTF 0x00000002 #define DEV_INT_INACTIVE 0x00000004 #define DEV_INT_USBRESET 0x00000008 #define DEV_INT_SUSPUSB 0x00000010 #define DEV_INT_SOF 0x00000020 #define DEV_INT_ENUM 0x00000040 /* Endpoint Interrupt Register definitions */ #define ENDP0_INT_CTRLIN 0x00000001 #define ENDP1_INT_BULKIN 0x00000002 #define ENDP_INT_NONISOIN_MSK 0x0000AAAA #define ENDP2_INT_BULKIN 0x00000004 #define ENDP0_INT_CTRLOUT 0x00010000 #define ENDP1_INT_BULKOUT 0x00020000 #define ENDP2_INT_BULKOUT 0x00040000 #define ENDP_INT_NONISOOUT_MSK 0x55540000 /* Endpoint Register definitions */ #define ENDP_EPDIR_OUT 0x00000000 #define ENDP_EPDIR_IN 0x00000010 #define ENDP_EPTYPE_CNTL 0x0 #define ENDP_EPTYPE_ISO 0x1 #define ENDP_EPTYPE_BULK 0x2 #define ENDP_EPTYPE_INT 0x3 /* * Defines for Plug Detect */ struct plug_regs { u32 plug_state; u32 plug_pending; }; /* Plug State Register definitions */ #define PLUG_STATUS_EN 0x1 #define PLUG_STATUS_ATTACHED 0x2 #define PLUG_STATUS_PHY_RESET 0x4 #define PLUG_STATUS_PHY_MODE 0x8 /* * Defines for UDC FIFO (Slave Mode) */ struct udcfifo_regs { u32 *fifo_p; }; /* * UDC endpoint definitions */ #define UDC_EP0 0 #define UDC_EP1 1 #define UDC_EP2 2 #define UDC_EP3 3 #endif /* __DW_UDC_H */