// SPDX-License-Identifier: GPL-2.0+ /* * Functions related to OMAP3 SDRC. * * This file has been created after exctracting and consolidating * the SDRC related content from mem.c and board.c, also created * generic init function (mem_init). * * Copyright (C) 2004-2010 * Texas Instruments Incorporated - http://www.ti.com/ * * Copyright (C) 2011 * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> * * Author : * Vaibhav Hiremath <hvaibhav@ti.com> * * Original implementation by (mem.c, board.c) : * Sunil Kumar <sunilsaini05@gmail.com> * Shashi Ranjan <shashiranjanmca05@gmail.com> * Manikandan Pillai <mani.pillai@ti.com> */ #include <common.h> #include <init.h> #include <asm/global_data.h> #include <asm/io.h> #include <asm/arch/mem.h> #include <asm/arch/sys_proto.h> DECLARE_GLOBAL_DATA_PTR; extern omap3_sysinfo sysinfo; static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; /* * is_mem_sdr - * - Return 1 if mem type in use is SDR */ u32 is_mem_sdr(void) { if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR) return 1; return 0; } /* * get_sdr_cs_size - * - Get size of chip select 0/1 */ static u32 get_sdr_cs_size(u32 cs) { u32 size; /* get ram size field */ size = readl(&sdrc_base->cs[cs].mcfg) >> 8; size &= 0x3FF; /* remove unwanted bits */ size <<= 21; /* multiply by 2 MiB to find size in MB */ return size; } /* * make_cs1_contiguous - * - When we have CS1 populated we want to have it mapped after cs0 to allow * command line mem=xyz use all memory with out discontinuous support * compiled in. We could do it in the ATAG, but there really is two banks... */ static void make_cs1_contiguous(void) { u32 size, a_add_low, a_add_high; size = get_sdr_cs_size(CS0); size >>= 25; /* divide by 32 MiB to find size to offset CS1 */ a_add_high = (size & 3) << 8; /* set up low field */ a_add_low = (size & 0x3C) >> 2; /* set up high field */ writel((a_add_high | a_add_low), &sdrc_base->cs_cfg); } /* * get_sdr_cs_offset - * - Get offset of cs from cs0 start */ u32 get_sdr_cs_offset(u32 cs) { u32 offset; if (!cs) return 0; offset = readl(&sdrc_base->cs_cfg); offset = (offset & 15) << 27 | (offset & 0x300) << 17; return offset; } /* * write_sdrc_timings - * - Takes CS and associated timings and initalize SDRAM * - Test CS to make sure it's OK for use */ static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, struct board_sdrc_timings *timings) { /* Setup timings we got from the board. */ writel(timings->mcfg, &sdrc_base->cs[cs].mcfg); writel(timings->ctrla, &sdrc_actim_base->ctrla); writel(timings->ctrlb, &sdrc_actim_base->ctrlb); writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); writel(CMD_NOP, &sdrc_base->cs[cs].manual); writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); writel(timings->mr, &sdrc_base->cs[cs].mr); /* * Test ram in this bank * Disable if bad or not present */ if (!mem_ok(cs)) writel(0, &sdrc_base->cs[cs].mcfg); } /* * do_sdrc_init - * - Code called once in C-Stack only context for CS0 and with early being * true and a possible 2nd time depending on memory configuration from * stack+global context. */ static void do_sdrc_init(u32 cs, u32 early) { struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1; struct board_sdrc_timings timings; sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; /* set some default timings */ timings.sharing = SDRC_SHARING; /* * When called in the early context this may be SPL and we will * need to set all of the timings. This ends up being board * specific so we call a helper function to take care of this * for us. Otherwise, to be safe, we need to copy the settings * from the first bank to the second. We will setup CS0, * then set cs_cfg to the appropriate value then try and * setup CS1. */ #ifdef CONFIG_SPL_BUILD /* set/modify board-specific timings */ get_board_mem_timings(&timings); #endif if (early) { /* reset sdrc controller */ writel(SOFTRESET, &sdrc_base->sysconfig); wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status, 12000000); writel(0, &sdrc_base->sysconfig); /* setup sdrc to ball mux */ writel(timings.sharing, &sdrc_base->sharing); /* Disable Power Down of CKE because of 1 CKE on combo part */ writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power); writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); #ifdef CONFIG_SPL_BUILD write_sdrc_timings(CS0, sdrc_actim_base0, &timings); make_cs1_contiguous(); write_sdrc_timings(CS1, sdrc_actim_base1, &timings); #endif } /* * If we aren't using SPL we have been loaded by some * other means which may not have correctly initialized * both CS0 and CS1 (such as some older versions of x-loader) * so we may be asked now to setup CS1. */ if (cs == CS1) { timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg), timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); timings.ctrla = readl(&sdrc_actim_base0->ctrla); timings.ctrlb = readl(&sdrc_actim_base0->ctrlb); timings.mr = readl(&sdrc_base->cs[CS0].mr); write_sdrc_timings(cs, sdrc_actim_base1, &timings); } } /* * dram_init - * - Sets uboots idea of sdram size */ int dram_init(void) { unsigned int size0 = 0, size1 = 0; size0 = get_sdr_cs_size(CS0); /* * We always need to have cs_cfg point at where the second * bank would be, if present. Failure to do so can lead to * strange situations where memory isn't detected and * configured correctly. CS0 will already have been setup * at this point. */ make_cs1_contiguous(); do_sdrc_init(CS1, NOT_EARLY); size1 = get_sdr_cs_size(CS1); gd->ram_size = size0 + size1; return 0; } int dram_init_banksize(void) { unsigned int size0 = 0, size1 = 0; size0 = get_sdr_cs_size(CS0); size1 = get_sdr_cs_size(CS1); gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = size0; gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); gd->bd->bi_dram[1].size = size1; return 0; } /* * mem_init - * - Init the sdrc chip, * - Selects CS0 and CS1, */ void mem_init(void) { /* only init up first bank here */ do_sdrc_init(CS0, EARLY_INIT); }