/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2018 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de */ #ifndef __CONFIG_H_ #define __CONFIG_H_ #include #include /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 /* Command definition */ #define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc1,115200\0" \ "fdt_addr=0x75000000\0" \ "fdt_high=0xffffffff\0" \ "scriptaddr=0x74000000\0" \ "kernel_file=fitImage\0"\ "silent=1\0"\ "rdinit=/sbin/init\0" \ "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \ "upd_image=st.4k\0" \ "uboot_file=u-boot.imx\0" \ "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \ "initrd_ram_dev=/dev/ram\0" \ "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \ "addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \ "loadusb=usb start; " \ "fatload usb 0 ${loadaddr} ${upd_image}\0" \ "up=if tftp ${loadaddr} ${uboot_file}; then " \ "setexpr blkc ${filesize} / 0x200; " \ "setexpr blkc ${blkc} + 1; " \ "mmc write ${loadaddr} 0x2 ${blkc}" \ "; fi\0" \ "upwic=setenv wic_file kp-image-kp${boardsoc}.wic; "\ "if tftp ${loadaddr} ${wic_file}; then " \ "setexpr blkc ${filesize} / 0x200; " \ "setexpr blkc ${blkc} + 1; " \ "mmc write ${loadaddr} 0x0 ${blkc}" \ "; fi\0" \ "usbupd=echo Booting update from usb ...; " \ "setenv bootargs; " \ "run updargs; " \ "run addinitrd; " \ "run addswupdate; " \ "run addkeys; " \ "run loadusb; " \ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(DHCP, dhcp, na) #include /* Miscellaneous configurable options */ /* Physical Memory Map */ #define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (512 * SZ_1M) #define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE) #define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1) #define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE) /* environment organization */ #endif /* __CONFIG_H_ */