/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (c) 2020 Engicam srl * Copyright (c) 2020 Amarula Solutions(India) */ #ifndef __IMX8MM_ICORE_MX8MM_H #define __IMX8MM_ICORE_MX8MM_H #include #include #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD # define CONFIG_SPL_STACK 0x920000 # define CONFIG_SPL_BSS_START_ADDR 0x910000 # define CONFIG_SPL_BSS_MAX_SIZE SZ_8K # define CONFIG_SYS_SPL_MALLOC_START 0x42200000 # define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ # define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ # define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 2) \ func(MMC, mmc, 0) #include #undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif #define ENV_MEM_LAYOUT_SETTINGS \ "fdt_addr_r=0x44000000\0" \ "kernel_addr_r=0x42000000\0" \ "ramdisk_addr_r=0x46400000\0" \ "scriptaddr=0x46000000\0" #define CONFIG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "console=ttymxc1,115200\0" \ BOOTENV /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_2M #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN SZ_32M #define CONFIG_SYS_SDRAM_BASE 0x40000000 /* SDRAM configuration */ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */ #define CONFIG_SYS_BOOTM_LEN SZ_256M #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_MEMTEST_END \ (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) /* UART */ #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 2048 #define CONFIG_SYS_MAXARGS 64 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __IMX8MM_ICORE_MX8MM_H */