/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2015-2016 Marvell International Ltd. */ #ifndef _COMPHY_A3700_H_ #define _COMPHY_A3700_H_ #include "comphy_core.h" #define MVEBU_REG(offs) \ ((void __iomem *)(ulong)MVEBU_REGISTER(offs)) #define DEFAULT_REFCLK_MHZ 25 #define PLL_SET_DELAY_US 600 #define PLL_LOCK_TIMEOUT 1000 #define POLL_16B_REG 1 #define POLL_32B_REG 0 /* * COMPHY SB definitions */ #define COMPHY_SEL_ADDR MVEBU_REG(0x0183FC) #define COMPHY_PHY_CFG1_ADDR(lane) MVEBU_REG(0x018300 + (1 - lane) * 0x28) #define rb_pin_pu_iveref BIT(1) #define rb_pin_reset_core BIT(11) #define rb_pin_reset_comphy BIT(12) #define rb_pin_pu_pll BIT(16) #define rb_pin_pu_rx BIT(17) #define rb_pin_pu_tx BIT(18) #define rb_pin_tx_idle BIT(19) #define rf_gen_rx_sel_shift 22 #define rf_gen_rx_select (0x0F << rf_gen_rx_sel_shift) #define rf_gen_tx_sel_shift 26 #define rf_gen_tx_select (0x0F << rf_gen_tx_sel_shift) #define rb_phy_rx_init BIT(30) #define COMPHY_PHY_STAT1_ADDR(lane) MVEBU_REG(0x018318 + (1 - lane) * 0x28) #define rb_rx_init_done BIT(0) #define rb_pll_ready_rx BIT(2) #define rb_pll_ready_tx BIT(3) /* * PCIe/USB/SGMII definitions */ #define PCIE_BASE MVEBU_REG(0x070000) #define PCIETOP_BASE MVEBU_REG(0x080000) #define PCIE_RAMBASE MVEBU_REG(0x08C000) #define PCIEPHY_BASE MVEBU_REG(0x01F000) #define PCIEPHY_SHFT 2 #define USB32_BASE MVEBU_REG(0x050000) /* usb3 device */ #define USB32H_BASE MVEBU_REG(0x058000) /* usb3 host */ #define USB3PHY_BASE MVEBU_REG(0x05C000) #define USB2PHY_BASE MVEBU_REG(0x05D000) #define USB2PHY2_BASE MVEBU_REG(0x05F000) #define USB32_CTRL_BASE MVEBU_REG(0x05D800) #define USB3PHY_SHFT 2 #define USB3PHY_LANE2_REG_BASE_OFFSET 0x200 static inline void __iomem *sgmiiphy_addr(u32 lane, u32 addr) { addr = (addr & 0x00007FF) * 2; if (lane == 1) return PCIEPHY_BASE + addr; else return USB3PHY_BASE + addr; } /* units */ enum phy_unit { PCIE = 1, USB3 = 2, }; static inline void __iomem *phy_addr(enum phy_unit unit, u32 addr) { if (unit == PCIE) return PCIEPHY_BASE + addr * PCIEPHY_SHFT; else return USB3PHY_BASE + addr * USB3PHY_SHFT; } /* bit definition for USB32_CTRL_BASE (USB32 Control Mode) */ #define usb32_ctrl_id_mode BIT(0) #define usb32_ctrl_soft_id BIT(1) #define usb32_ctrl_int_mode BIT(4) #define PWR_PLL_CTRL 0x01 #define rf_phy_mode_shift 5 #define rf_phy_mode_mask (0x7 << rf_phy_mode_shift) #define rf_ref_freq_sel_shift 0 #define rf_ref_freq_sel_mask (0x1F << rf_ref_freq_sel_shift) #define PHY_MODE_SGMII 0x4 #define KVCO_CAL_CTRL 0x02 #define rb_use_max_pll_rate BIT(12) #define rb_force_calibration_done BIT(9) #define DIG_LB_EN 0x23 #define rf_data_width_shift 10 #define rf_data_width_mask (0x3 << rf_data_width_shift) #define SYNC_PATTERN 0x24 #define phy_txd_inv BIT(10) #define phy_rxd_inv BIT(11) #define SYNC_MASK_GEN 0x25 #define rb_idle_sync_en BIT(12) #define UNIT_CTRL 0x48 #define GEN2_SETTINGS_2 0x3e #define g2_tx_ssc_amp BIT(14) #define GEN2_SETTINGS_3 0x3f #define GEN3_SETTINGS_3 0x112 #define MISC_REG0 0x4f #define rb_clk100m_125m_en BIT(4) #define rb_clk500m_en BIT(7) #define rb_ref_clk_sel BIT(10) #define UNIT_IFACE_REF_CLK_CTRL 0x51 #define rb_ref1m_gen_div_force BIT(8) #define rf_ref1m_gen_div_value_shift 0 #define rf_ref1m_gen_div_value_mask (0xFF << rf_ref1m_gen_div_value_shift) #define UNIT_ERR_CNT_CONST_CTRL 0x6a #define rb_fast_dfe_enable BIT(13) #define MISC_REG1 0x73 #define bf_sel_bits_pcie_force BIT(15) #define LANE_CFG0 0x180 #define bf_use_max_pll_rate BIT(9) #define LANE_CFG1 0x181 #define bf_use_max_pll_rate BIT(9) #define prd_txdeemph1_mask BIT(15) #define tx_det_rx_mode BIT(6) #define gen2_tx_data_dly_deft (2 << 3) #define gen2_tx_data_dly_mask (BIT(3) | BIT(4)) #define tx_elec_idle_mode_en BIT(0) #define LANE_CFG4 0x188 #define bf_spread_spectrum_clock_en BIT(7) #define LANE_STAT1 0x183 #define rb_txdclk_pclk_en BIT(0) #define GLOB_PHY_CTRL0 0x1c1 #define bf_soft_rst BIT(0) #define bf_mode_refdiv 0x30 #define rb_mode_core_clk_freq_sel BIT(9) #define rb_mode_pipe_width_32 BIT(3) #define TEST_MODE_CTRL 0x1c2 #define rb_mode_margin_override BIT(2) #define GLOB_CLK_SRC_LO 0x1c3 #define bf_cfg_sel_20b BIT(15) #define PWR_MGM_TIM1 0x1d0 #define PCIE_REF_CLK_ADDR (PCIE_BASE + 0x4814) #define USB3_CTRPUL_VAL_REG (0x20 + USB32_BASE) #define USB3H_CTRPUL_VAL_REG (0x3454 + USB32H_BASE) #define rb_usb3_ctr_100ns 0xff000000 #define USB2_OTG_PHY_CTRL_ADDR (0x820 + USB2PHY_BASE) #define rb_usb2phy_suspm BIT(14) #define rb_usb2phy_pu BIT(0) #define USB2_PHY_OTG_CTRL_ADDR (0x34 + USB2PHY_BASE) #define rb_pu_otg BIT(4) #define USB2_PHY_CHRGR_DET_ADDR (0x38 + USB2PHY_BASE) #define rb_cdp_en BIT(2) #define rb_dcp_en BIT(3) #define rb_pd_en BIT(4) #define rb_pu_chrg_dtc BIT(5) #define rb_cdp_dm_auto BIT(7) #define rb_enswitch_dp BIT(12) #define rb_enswitch_dm BIT(13) #define USB2_CAL_CTRL_ADDR (0x8 + USB2PHY_BASE) #define rb_usb2phy_pllcal_done BIT(31) #define rb_usb2phy_impcal_done BIT(23) #define USB2_PLL_CTRL0_ADDR (0x0 + USB2PHY_BASE) #define rb_usb2phy_pll_ready BIT(31) #define USB2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY_BASE) #define rb_usb2phy_sqcal_done BIT(31) #define USB2_PHY2_CTRL_ADDR (0x804 + USB2PHY2_BASE) #define rb_usb2phy2_suspm BIT(7) #define rb_usb2phy2_pu BIT(0) #define USB2_PHY2_CAL_CTRL_ADDR (0x8 + USB2PHY2_BASE) #define USB2_PHY2_PLL_CTRL0_ADDR (0x0 + USB2PHY2_BASE) #define USB2_PHY2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY2_BASE) #define USB2_PHY_BASE(usb32) (usb32 == 0 ? USB2PHY2_BASE : USB2PHY_BASE) #define USB2_PHY_CTRL_ADDR(usb32) \ (usb32 == 0 ? USB2_PHY2_CTRL_ADDR : USB2_OTG_PHY_CTRL_ADDR) #define RB_USB2PHY_SUSPM(usb32) \ (usb32 == 0 ? rb_usb2phy2_suspm : rb_usb2phy_suspm) #define RB_USB2PHY_PU(usb32) \ (usb32 == 0 ? rb_usb2phy2_pu : rb_usb2phy_pu) #define USB2_PHY_CAL_CTRL_ADDR(usb32) \ (usb32 == 0 ? USB2_PHY2_CAL_CTRL_ADDR : USB2_CAL_CTRL_ADDR) #define USB2_PHY_RX_CHAN_CTRL1_ADDR(usb32) \ (usb32 == 0 ? USB2_PHY2_RX_CHAN_CTRL1_ADDR : USB2_RX_CHAN_CTRL1_ADDR) #define USB2_PHY_PLL_CTRL0_ADDR(usb32) \ (usb32 == 0 ? USB2_PHY2_PLL_CTRL0_ADDR : USB2_PLL_CTRL0_ADDR) /* * SATA definitions */ #define AHCI_BASE MVEBU_REG(0xE0000) #define rh_vsreg_addr (AHCI_BASE + 0x178) #define rh_vsreg_data (AHCI_BASE + 0x17C) #define rh_vs0_a (AHCI_BASE + 0xA0) #define rh_vs0_d (AHCI_BASE + 0xA4) #define vphy_sync_pattern_reg 0x224 #define bs_txd_inv BIT(10) #define bs_rxd_inv BIT(11) #define vphy_loopback_reg0 0x223 #define bs_phyintf_40bit 0x0C00 #define bs_pll_ready_tx 0x10 #define vphy_power_reg0 0x201 #define vphy_calctl_reg 0x202 #define bs_max_pll_rate BIT(12) #define vphy_reserve_reg 0x0e #define bs_phyctrl_frm_pin BIT(13) #define vsata_ctrl_reg 0x00 #define bs_phy_pu_pll BIT(6) /* * SDIO/eMMC definitions */ #define SDIO_BASE MVEBU_REG(0xD8000) #define SDIO_HOST_CTRL1_ADDR (SDIO_BASE + 0x28) #define SDIO_SDHC_FIFO_ADDR (SDIO_BASE + 0x12C) #define SDIO_CAP_12_ADDR (SDIO_BASE + 0x40) #define SDIO_ENDIAN_ADDR (SDIO_BASE + 0x1A4) #define SDIO_PHY_TIMING_ADDR (SDIO_BASE + 0x170) #define SDIO_PHY_PAD_CTRL0_ADDR (SDIO_BASE + 0x178) #define SDIO_DLL_RST_ADDR (SDIO_BASE + 0x148) #endif /* _COMPHY_A3700_H_ */