// SPDX-License-Identifier: GPL-2.0+ /* * board/renesas/draak/draak.c * This file is Draak board support. * * Copyright (C) 2017 Marek Vasut */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; #define GSX_MSTP112 BIT(12) /* 3DG */ #define SCIF2_MSTP310 BIT(10) /* SCIF2 */ #define DVFS_MSTP926 BIT(26) #define HSUSB_MSTP704 BIT(4) /* HSUSB */ int board_early_init_f(void) { #if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH) /* DVFS for reset */ mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926); #endif return 0; } /* HSUSB block registers */ #define HSUSB_REG_LPSTS 0xE6590102 #define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14) #define HSUSB_REG_UGCTRL2 0xE6590184 #define HSUSB_REG_UGCTRL2_USB0SEL 0x30 #define HSUSB_REG_UGCTRL2_USB0SEL_EHCI 0x10 int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; /* USB1 pull-up */ setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); /* Configure the HSUSB block */ mstp_clrbits_le32(SMSTPCR7, SMSTPCR7, HSUSB_MSTP704); /* Choice USB0SEL */ clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL, HSUSB_REG_UGCTRL2_USB0SEL_EHCI); /* low power status */ setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL); return 0; } #define RST_BASE 0xE6160000 #define RST_CA57RESCNT (RST_BASE + 0x40) #define RST_CA53RESCNT (RST_BASE + 0x44) #define RST_RSTOUTCR (RST_BASE + 0x58) #define RST_CA57_CODE 0xA5A5000F #define RST_CA53_CODE 0x5A5A000F void reset_cpu(ulong addr) { unsigned long midr, cputype; asm volatile("mrs %0, midr_el1" : "=r" (midr)); cputype = (midr >> 4) & 0xfff; if (cputype == 0xd03) writel(RST_CA53_CODE, RST_CA53RESCNT); else if (cputype == 0xd07) writel(RST_CA57_CODE, RST_CA57RESCNT); else hang(); }