// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2012 Samsung Electronics * * Author: InKi Dae * Author: Donghwa Lee */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; enum { FIMD_RGB_INTERFACE = 1, FIMD_CPU_INTERFACE = 2, }; enum exynos_fb_rgb_mode_t { MODE_RGB_P = 0, MODE_BGR_P = 1, MODE_RGB_S = 2, MODE_BGR_S = 3, }; struct exynos_fb_priv { ushort vl_col; /* Number of columns (i.e. 640) */ ushort vl_row; /* Number of rows (i.e. 480) */ ushort vl_rot; /* Rotation of Display (0, 1, 2, 3) */ ushort vl_width; /* Width of display area in millimeters */ ushort vl_height; /* Height of display area in millimeters */ /* LCD configuration register */ u_char vl_freq; /* Frequency */ u_char vl_clkp; /* Clock polarity */ u_char vl_oep; /* Output Enable polarity */ u_char vl_hsp; /* Horizontal Sync polarity */ u_char vl_vsp; /* Vertical Sync polarity */ u_char vl_dp; /* Data polarity */ u_char vl_bpix; /* Bits per pixel */ /* Horizontal control register. Timing from data sheet */ u_char vl_hspw; /* Horz sync pulse width */ u_char vl_hfpd; /* Wait before of line */ u_char vl_hbpd; /* Wait end of line */ /* Vertical control register. */ u_char vl_vspw; /* Vertical sync pulse width */ u_char vl_vfpd; /* Wait before of frame */ u_char vl_vbpd; /* Wait end of frame */ u_char vl_cmd_allow_len; /* Wait end of frame */ unsigned int win_id; unsigned int init_delay; unsigned int power_on_delay; unsigned int reset_delay; unsigned int interface_mode; unsigned int mipi_enabled; unsigned int dp_enabled; unsigned int cs_setup; unsigned int wr_setup; unsigned int wr_act; unsigned int wr_hold; unsigned int logo_on; unsigned int logo_width; unsigned int logo_height; int logo_x_offset; int logo_y_offset; unsigned long logo_addr; unsigned int rgb_mode; unsigned int resolution; /* parent clock name(MPLL, EPLL or VPLL) */ unsigned int pclk_name; /* ratio value for source clock from parent clock. */ unsigned int sclk_div; unsigned int dual_lcd_enabled; struct exynos_fb *reg; struct exynos_platform_mipi_dsim *dsim_platform_data_dt; }; static void exynos_fimd_set_dualrgb(struct exynos_fb_priv *priv, bool enabled) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; if (enabled) { cfg = EXYNOS_DUALRGB_BYPASS_DUAL | EXYNOS_DUALRGB_LINESPLIT | EXYNOS_DUALRGB_VDEN_EN_ENABLE; /* in case of Line Split mode, MAIN_CNT doesn't neet to set. */ cfg |= EXYNOS_DUALRGB_SUB_CNT(priv->vl_col / 2) | EXYNOS_DUALRGB_MAIN_CNT(0); } writel(cfg, ®->dualrgb); } static void exynos_fimd_set_dp_clkcon(struct exynos_fb_priv *priv, unsigned int enabled) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; if (enabled) cfg = EXYNOS_DP_CLK_ENABLE; writel(cfg, ®->dp_mie_clkcon); } static void exynos_fimd_set_par(struct exynos_fb_priv *priv, unsigned int win_id) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; /* set window control */ cfg = readl((unsigned int)®->wincon0 + EXYNOS_WINCON(win_id)); cfg &= ~(EXYNOS_WINCON_BITSWP_ENABLE | EXYNOS_WINCON_BYTESWP_ENABLE | EXYNOS_WINCON_HAWSWP_ENABLE | EXYNOS_WINCON_WSWP_ENABLE | EXYNOS_WINCON_BURSTLEN_MASK | EXYNOS_WINCON_BPPMODE_MASK | EXYNOS_WINCON_INRGB_MASK | EXYNOS_WINCON_DATAPATH_MASK); /* DATAPATH is DMA */ cfg |= EXYNOS_WINCON_DATAPATH_DMA; cfg |= EXYNOS_WINCON_HAWSWP_ENABLE; /* dma burst is 16 */ cfg |= EXYNOS_WINCON_BURSTLEN_16WORD; switch (priv->vl_bpix) { case 4: cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565; break; default: cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888; break; } writel(cfg, (unsigned int)®->wincon0 + EXYNOS_WINCON(win_id)); /* set window position to x=0, y=0*/ cfg = EXYNOS_VIDOSD_LEFT_X(0) | EXYNOS_VIDOSD_TOP_Y(0); writel(cfg, (unsigned int)®->vidosd0a + EXYNOS_VIDOSD(win_id)); cfg = EXYNOS_VIDOSD_RIGHT_X(priv->vl_col - 1) | EXYNOS_VIDOSD_BOTTOM_Y(priv->vl_row - 1) | EXYNOS_VIDOSD_RIGHT_X_E(1) | EXYNOS_VIDOSD_BOTTOM_Y_E(0); writel(cfg, (unsigned int)®->vidosd0b + EXYNOS_VIDOSD(win_id)); /* set window size for window0*/ cfg = EXYNOS_VIDOSD_SIZE(priv->vl_col * priv->vl_row); writel(cfg, (unsigned int)®->vidosd0c + EXYNOS_VIDOSD(win_id)); } static void exynos_fimd_set_buffer_address(struct exynos_fb_priv *priv, unsigned int win_id, ulong lcd_base_addr) { struct exynos_fb *reg = priv->reg; unsigned long start_addr, end_addr; start_addr = lcd_base_addr; end_addr = start_addr + ((priv->vl_col * (VNBITS(priv->vl_bpix) / 8)) * priv->vl_row); writel(start_addr, (unsigned int)®->vidw00add0b0 + EXYNOS_BUFFER_OFFSET(win_id)); writel(end_addr, (unsigned int)®->vidw00add1b0 + EXYNOS_BUFFER_OFFSET(win_id)); } static void exynos_fimd_set_clock(struct exynos_fb_priv *priv) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0, div = 0, remainder, remainder_div; unsigned long pixel_clock; unsigned long long src_clock; if (priv->dual_lcd_enabled) { pixel_clock = priv->vl_freq * (priv->vl_hspw + priv->vl_hfpd + priv->vl_hbpd + priv->vl_col / 2) * (priv->vl_vspw + priv->vl_vfpd + priv->vl_vbpd + priv->vl_row); } else if (priv->interface_mode == FIMD_CPU_INTERFACE) { pixel_clock = priv->vl_freq * priv->vl_width * priv->vl_height * (priv->cs_setup + priv->wr_setup + priv->wr_act + priv->wr_hold + 1); } else { pixel_clock = priv->vl_freq * (priv->vl_hspw + priv->vl_hfpd + priv->vl_hbpd + priv->vl_col) * (priv->vl_vspw + priv->vl_vfpd + priv->vl_vbpd + priv->vl_row); } cfg = readl(®->vidcon0); cfg &= ~(EXYNOS_VIDCON0_CLKSEL_MASK | EXYNOS_VIDCON0_CLKVALUP_MASK | EXYNOS_VIDCON0_CLKVAL_F(0xFF) | EXYNOS_VIDCON0_VCLKEN_MASK | EXYNOS_VIDCON0_CLKDIR_MASK); cfg |= (EXYNOS_VIDCON0_CLKSEL_SCLK | EXYNOS_VIDCON0_CLKVALUP_ALWAYS | EXYNOS_VIDCON0_VCLKEN_NORMAL | EXYNOS_VIDCON0_CLKDIR_DIVIDED); src_clock = (unsigned long long) get_lcd_clk(); /* get quotient and remainder. */ remainder = do_div(src_clock, pixel_clock); div = src_clock; remainder *= 10; remainder_div = remainder / pixel_clock; /* round about one places of decimals. */ if (remainder_div >= 5) div++; /* in case of dual lcd mode. */ if (priv->dual_lcd_enabled) div--; cfg |= EXYNOS_VIDCON0_CLKVAL_F(div - 1); writel(cfg, ®->vidcon0); } void exynos_set_trigger(struct exynos_fb_priv *priv) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; cfg = readl(®->trigcon); cfg |= (EXYNOS_I80SOFT_TRIG_EN | EXYNOS_I80START_TRIG); writel(cfg, ®->trigcon); } int exynos_is_i80_frame_done(struct exynos_fb_priv *priv) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; int status; cfg = readl(®->trigcon); /* frame done func is valid only when TRIMODE[0] is set to 1. */ status = (cfg & EXYNOS_I80STATUS_TRIG_DONE) == EXYNOS_I80STATUS_TRIG_DONE; return status; } static void exynos_fimd_lcd_on(struct exynos_fb_priv *priv) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; /* display on */ cfg = readl(®->vidcon0); cfg |= (EXYNOS_VIDCON0_ENVID_ENABLE | EXYNOS_VIDCON0_ENVID_F_ENABLE); writel(cfg, ®->vidcon0); } static void exynos_fimd_window_on(struct exynos_fb_priv *priv, unsigned int win_id) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; /* enable window */ cfg = readl((unsigned int)®->wincon0 + EXYNOS_WINCON(win_id)); cfg |= EXYNOS_WINCON_ENWIN_ENABLE; writel(cfg, (unsigned int)®->wincon0 + EXYNOS_WINCON(win_id)); cfg = readl(®->winshmap); cfg |= EXYNOS_WINSHMAP_CH_ENABLE(win_id); writel(cfg, ®->winshmap); } void exynos_fimd_lcd_off(struct exynos_fb_priv *priv) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; cfg = readl(®->vidcon0); cfg &= (EXYNOS_VIDCON0_ENVID_DISABLE | EXYNOS_VIDCON0_ENVID_F_DISABLE); writel(cfg, ®->vidcon0); } void exynos_fimd_window_off(struct exynos_fb_priv *priv, unsigned int win_id) { struct exynos_fb *reg = priv->reg; unsigned int cfg = 0; cfg = readl((unsigned int)®->wincon0 + EXYNOS_WINCON(win_id)); cfg &= EXYNOS_WINCON_ENWIN_DISABLE; writel(cfg, (unsigned int)®->wincon0 + EXYNOS_WINCON(win_id)); cfg = readl(®->winshmap); cfg &= ~EXYNOS_WINSHMAP_CH_DISABLE(win_id); writel(cfg, ®->winshmap); } /* * The reset value for FIMD SYSMMU register MMU_CTRL is 3 * on Exynos5420 and newer versions. * This means FIMD SYSMMU is on by default on Exynos5420 * and newer versions. * Since in u-boot we don't use SYSMMU, we should disable * those FIMD SYSMMU. * Note that there are 2 SYSMMU for FIMD: m0 and m1. * m0 handles windows 0 and 4, and m1 handles windows 1, 2 and 3. * We disable both of them here. */ void exynos_fimd_disable_sysmmu(void) { u32 *sysmmufimd; unsigned int node; int node_list[2]; int count; int i; count = fdtdec_find_aliases_for_id(gd->fdt_blob, "fimd", COMPAT_SAMSUNG_EXYNOS_SYSMMU, node_list, 2); for (i = 0; i < count; i++) { node = node_list[i]; if (node <= 0) { debug("Can't get device node for fimd sysmmu\n"); return; } sysmmufimd = (u32 *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); if (!sysmmufimd) { debug("Can't get base address for sysmmu fimdm0"); return; } writel(0x0, sysmmufimd); } } void exynos_fimd_lcd_init(struct udevice *dev) { struct exynos_fb_priv *priv = dev_get_priv(dev); struct video_uc_platdata *plat = dev_get_uclass_plat(dev); struct exynos_fb *reg = priv->reg; unsigned int cfg = 0, rgb_mode; unsigned int offset; unsigned int node; node = dev_of_offset(dev); if (fdtdec_get_bool(gd->fdt_blob, node, "samsung,disable-sysmmu")) exynos_fimd_disable_sysmmu(); offset = exynos_fimd_get_base_offset(); rgb_mode = priv->rgb_mode; if (priv->interface_mode == FIMD_RGB_INTERFACE) { cfg |= EXYNOS_VIDCON0_VIDOUT_RGB; writel(cfg, ®->vidcon0); cfg = readl(®->vidcon2); cfg &= ~(EXYNOS_VIDCON2_WB_MASK | EXYNOS_VIDCON2_TVFORMATSEL_MASK | EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK); cfg |= EXYNOS_VIDCON2_WB_DISABLE; writel(cfg, ®->vidcon2); /* set polarity */ cfg = 0; if (!priv->vl_clkp) cfg |= EXYNOS_VIDCON1_IVCLK_RISING_EDGE; if (!priv->vl_hsp) cfg |= EXYNOS_VIDCON1_IHSYNC_INVERT; if (!priv->vl_vsp) cfg |= EXYNOS_VIDCON1_IVSYNC_INVERT; if (!priv->vl_dp) cfg |= EXYNOS_VIDCON1_IVDEN_INVERT; writel(cfg, (unsigned int)®->vidcon1 + offset); /* set timing */ cfg = EXYNOS_VIDTCON0_VFPD(priv->vl_vfpd - 1); cfg |= EXYNOS_VIDTCON0_VBPD(priv->vl_vbpd - 1); cfg |= EXYNOS_VIDTCON0_VSPW(priv->vl_vspw - 1); writel(cfg, (unsigned int)®->vidtcon0 + offset); cfg = EXYNOS_VIDTCON1_HFPD(priv->vl_hfpd - 1); cfg |= EXYNOS_VIDTCON1_HBPD(priv->vl_hbpd - 1); cfg |= EXYNOS_VIDTCON1_HSPW(priv->vl_hspw - 1); writel(cfg, (unsigned int)®->vidtcon1 + offset); /* set lcd size */ cfg = EXYNOS_VIDTCON2_HOZVAL(priv->vl_col - 1) | EXYNOS_VIDTCON2_LINEVAL(priv->vl_row - 1) | EXYNOS_VIDTCON2_HOZVAL_E(priv->vl_col - 1) | EXYNOS_VIDTCON2_LINEVAL_E(priv->vl_row - 1); writel(cfg, (unsigned int)®->vidtcon2 + offset); } /* set display mode */ cfg = readl(®->vidcon0); cfg &= ~EXYNOS_VIDCON0_PNRMODE_MASK; cfg |= (rgb_mode << EXYNOS_VIDCON0_PNRMODE_SHIFT); writel(cfg, ®->vidcon0); /* set par */ exynos_fimd_set_par(priv, priv->win_id); /* set memory address */ exynos_fimd_set_buffer_address(priv, priv->win_id, plat->base); /* set buffer size */ cfg = EXYNOS_VIDADDR_PAGEWIDTH(priv->vl_col * VNBITS(priv->vl_bpix) / 8) | EXYNOS_VIDADDR_PAGEWIDTH_E(priv->vl_col * VNBITS(priv->vl_bpix) / 8) | EXYNOS_VIDADDR_OFFSIZE(0) | EXYNOS_VIDADDR_OFFSIZE_E(0); writel(cfg, (unsigned int)®->vidw00add2 + EXYNOS_BUFFER_SIZE(priv->win_id)); /* set clock */ exynos_fimd_set_clock(priv); /* set rgb mode to dual lcd. */ exynos_fimd_set_dualrgb(priv, priv->dual_lcd_enabled); /* display on */ exynos_fimd_lcd_on(priv); /* window on */ exynos_fimd_window_on(priv, priv->win_id); exynos_fimd_set_dp_clkcon(priv, priv->dp_enabled); } unsigned long exynos_fimd_calc_fbsize(struct exynos_fb_priv *priv) { return priv->vl_col * priv->vl_row * (VNBITS(priv->vl_bpix) / 8); } int exynos_fb_ofdata_to_platdata(struct udevice *dev) { struct exynos_fb_priv *priv = dev_get_priv(dev); unsigned int node = dev_of_offset(dev); const void *blob = gd->fdt_blob; fdt_addr_t addr; addr = dev_read_addr(dev); if (addr == FDT_ADDR_T_NONE) { debug("Can't get the FIMD base address\n"); return -EINVAL; } priv->reg = (struct exynos_fb *)addr; priv->vl_col = fdtdec_get_int(blob, node, "samsung,vl-col", 0); if (priv->vl_col == 0) { debug("Can't get XRES\n"); return -ENXIO; } priv->vl_row = fdtdec_get_int(blob, node, "samsung,vl-row", 0); if (priv->vl_row == 0) { debug("Can't get YRES\n"); return -ENXIO; } priv->vl_width = fdtdec_get_int(blob, node, "samsung,vl-width", 0); priv->vl_height = fdtdec_get_int(blob, node, "samsung,vl-height", 0); priv->vl_freq = fdtdec_get_int(blob, node, "samsung,vl-freq", 0); if (priv->vl_freq == 0) { debug("Can't get refresh rate\n"); return -ENXIO; } if (fdtdec_get_bool(blob, node, "samsung,vl-clkp")) priv->vl_clkp = VIDEO_ACTIVE_LOW; if (fdtdec_get_bool(blob, node, "samsung,vl-oep")) priv->vl_oep = VIDEO_ACTIVE_LOW; if (fdtdec_get_bool(blob, node, "samsung,vl-hsp")) priv->vl_hsp = VIDEO_ACTIVE_LOW; if (fdtdec_get_bool(blob, node, "samsung,vl-vsp")) priv->vl_vsp = VIDEO_ACTIVE_LOW; if (fdtdec_get_bool(blob, node, "samsung,vl-dp")) priv->vl_dp = VIDEO_ACTIVE_LOW; priv->vl_bpix = fdtdec_get_int(blob, node, "samsung,vl-bpix", 0); if (priv->vl_bpix == 0) { debug("Can't get bits per pixel\n"); return -ENXIO; } priv->vl_hspw = fdtdec_get_int(blob, node, "samsung,vl-hspw", 0); if (priv->vl_hspw == 0) { debug("Can't get hsync width\n"); return -ENXIO; } priv->vl_hfpd = fdtdec_get_int(blob, node, "samsung,vl-hfpd", 0); if (priv->vl_hfpd == 0) { debug("Can't get right margin\n"); return -ENXIO; } priv->vl_hbpd = (u_char)fdtdec_get_int(blob, node, "samsung,vl-hbpd", 0); if (priv->vl_hbpd == 0) { debug("Can't get left margin\n"); return -ENXIO; } priv->vl_vspw = (u_char)fdtdec_get_int(blob, node, "samsung,vl-vspw", 0); if (priv->vl_vspw == 0) { debug("Can't get vsync width\n"); return -ENXIO; } priv->vl_vfpd = fdtdec_get_int(blob, node, "samsung,vl-vfpd", 0); if (priv->vl_vfpd == 0) { debug("Can't get lower margin\n"); return -ENXIO; } priv->vl_vbpd = fdtdec_get_int(blob, node, "samsung,vl-vbpd", 0); if (priv->vl_vbpd == 0) { debug("Can't get upper margin\n"); return -ENXIO; } priv->vl_cmd_allow_len = fdtdec_get_int(blob, node, "samsung,vl-cmd-allow-len", 0); priv->win_id = fdtdec_get_int(blob, node, "samsung,winid", 0); priv->init_delay = fdtdec_get_int(blob, node, "samsung,init-delay", 0); priv->power_on_delay = fdtdec_get_int(blob, node, "samsung,power-on-delay", 0); priv->reset_delay = fdtdec_get_int(blob, node, "samsung,reset-delay", 0); priv->interface_mode = fdtdec_get_int(blob, node, "samsung,interface-mode", 0); priv->mipi_enabled = fdtdec_get_int(blob, node, "samsung,mipi-enabled", 0); priv->dp_enabled = fdtdec_get_int(blob, node, "samsung,dp-enabled", 0); priv->cs_setup = fdtdec_get_int(blob, node, "samsung,cs-setup", 0); priv->wr_setup = fdtdec_get_int(blob, node, "samsung,wr-setup", 0); priv->wr_act = fdtdec_get_int(blob, node, "samsung,wr-act", 0); priv->wr_hold = fdtdec_get_int(blob, node, "samsung,wr-hold", 0); priv->logo_on = fdtdec_get_int(blob, node, "samsung,logo-on", 0); if (priv->logo_on) { priv->logo_width = fdtdec_get_int(blob, node, "samsung,logo-width", 0); priv->logo_height = fdtdec_get_int(blob, node, "samsung,logo-height", 0); priv->logo_addr = fdtdec_get_int(blob, node, "samsung,logo-addr", 0); } priv->rgb_mode = fdtdec_get_int(blob, node, "samsung,rgb-mode", 0); priv->pclk_name = fdtdec_get_int(blob, node, "samsung,pclk-name", 0); priv->sclk_div = fdtdec_get_int(blob, node, "samsung,sclk-div", 0); priv->dual_lcd_enabled = fdtdec_get_int(blob, node, "samsung,dual-lcd-enabled", 0); return 0; } static int exynos_fb_probe(struct udevice *dev) { struct video_priv *uc_priv = dev_get_uclass_priv(dev); struct exynos_fb_priv *priv = dev_get_priv(dev); struct udevice *panel, *bridge; struct udevice *dp; int ret; debug("%s: start\n", __func__); set_system_display_ctrl(); set_lcd_clk(); #ifdef CONFIG_EXYNOS_MIPI_DSIM exynos_init_dsim_platform_data(&panel_info); #endif exynos_fimd_lcd_init(dev); ret = uclass_first_device(UCLASS_PANEL, &panel); if (ret) { printf("LCD panel failed to probe\n"); return ret; } if (!panel) { printf("LCD panel not found\n"); return -ENODEV; } ret = uclass_first_device(UCLASS_DISPLAY, &dp); if (ret) { debug("%s: Display device error %d\n", __func__, ret); return ret; } if (!dev) { debug("%s: Display device missing\n", __func__); return -ENODEV; } ret = display_enable(dp, 18, NULL); if (ret) { debug("%s: Display enable error %d\n", __func__, ret); return ret; } /* backlight / pwm */ ret = panel_enable_backlight(panel); if (ret) { debug("%s: backlight error: %d\n", __func__, ret); return ret; } ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge); if (!ret) ret = video_bridge_set_backlight(bridge, 80); if (ret) { debug("%s: No video bridge, or no backlight on bridge\n", __func__); exynos_pinmux_config(PERIPH_ID_PWM0, 0); } uc_priv->xsize = priv->vl_col; uc_priv->ysize = priv->vl_row; uc_priv->bpix = priv->vl_bpix; /* Enable flushing after LCD writes if requested */ video_set_flush_dcache(dev, true); return 0; } static int exynos_fb_bind(struct udevice *dev) { struct video_uc_platdata *plat = dev_get_uclass_plat(dev); /* This is the maximum panel size we expect to see */ plat->size = 1920 * 1080 * 2; return 0; } static const struct video_ops exynos_fb_ops = { }; static const struct udevice_id exynos_fb_ids[] = { { .compatible = "samsung,exynos-fimd" }, { } }; U_BOOT_DRIVER(exynos_fb) = { .name = "exynos_fb", .id = UCLASS_VIDEO, .of_match = exynos_fb_ids, .ops = &exynos_fb_ops, .bind = exynos_fb_bind, .probe = exynos_fb_probe, .ofdata_to_platdata = exynos_fb_ofdata_to_platdata, .priv_auto = sizeof(struct exynos_fb_priv), };