/* * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> * * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g25.dtsi" #include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { apb { spi0: spi@f0000000 { status = "disabled"; }; mmc1: mmc@f000c000 { status = "disabled"; }; i2c0: i2c@f8010000 { ov2640: camera@30 { compatible = "ovti,ov2640"; reg = <0x30>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; clocks = <&pck0>; clock-names = "xvclk"; assigned-clocks = <&pck0>; assigned-clock-rates = <25000000>; status = "okay"; port { ov2640_0: endpoint { remote-endpoint = <&isi_0>; bus-width = <8>; }; }; }; }; macb0: ethernet@f802c000 { phy-mode = "rmii"; status = "okay"; }; isi: isi@f8048000 { status = "okay"; port { isi_0: endpoint@0 { reg = <0>; remote-endpoint = <&ov2640_0>; bus-width = <8>; vsync-active = <1>; hsync-active = <1>; }; }; }; }; }; };