/* * Copyright 2016 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __LS1012A_COMMON_H #define __LS1012A_COMMON_H #define CONFIG_FSL_LAYERSCAPE #define CONFIG_GICV2 #include #include #define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_SYS_TEXT_BASE 0x40100000 #define CONFIG_SYS_CLK_FREQ 125000000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL /* Generic Timer Definitions */ #define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ/4 /* 25MHz */ /* CSU */ #define CONFIG_LAYERSCAPE_NS_ACCESS /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /*SPI device */ #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_QE_FW_IN_SPIFLASH #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 1000000 #define CONFIG_ENV_SPI_MODE 0x03 #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_FSL_SPI_INTERFACE #define CONFIG_SF_DATAFLASH #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define CONFIG_SPI_FLASH_SPANSION #define FSL_QSPI_FLASH_SIZE SZ_64M #define FSL_QSPI_FLASH_NUM 2 /* * Environment */ #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x40000 /* 256KB */ #define CONFIG_ENV_OFFSET 0x200000 /* 2MB */ #define CONFIG_ENV_SECT_SIZE 0x40000 #endif /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* Command line configuration */ #define CONFIG_CMD_ENV #undef CONFIG_CMD_IMLS #define CONFIG_SYS_HZ 1000 #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0xa00000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" #define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ "$kernel_start $kernel_size && "\ "bootm $kernel_load" /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ #define CONFIG_PANIC_HANG #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #endif /* __LS1012A_COMMON_H */