/* SPDX-License-Identifier: GPL-2.0+ */ /* * Sysam stmark2 board configuration * * (C) Copyright 2017 Angelo Dureghello */ #ifndef __STMARK2_CONFIG_H #define __STMARK2_CONFIG_H #define CFG_SYS_UART_PORT 0 #define LDS_BOARD_TEXT \ board/sysam/stmark2/sbf_dram_init.o (.text*) #define CFG_EXTRA_ENV_SETTINGS \ "kern_size=0x700000\0" \ "loadaddr=0x40001000\0" \ "-(rootfs)\0" \ "update_uboot=loady ${loadaddr}; " \ "sf probe 0:1 50000000; " \ "sf erase 0 0x80000; " \ "sf write ${loadaddr} 0 ${filesize}\0" \ "update_kernel=loady ${loadaddr}; " \ "setenv kern_size ${filesize}; saveenv; " \ "sf probe 0:1 50000000; " \ "sf erase 0x100000 0x700000; " \ "sf write ${loadaddr} 0x100000 ${filesize}\0" \ "update_rootfs=loady ${loadaddr}; " \ "sf probe 0:1 50000000; " \ "sf erase 0x00800000 0x100000; " \ "sf write ${loadaddr} 0x00800000 ${filesize}\0" \ "" #define CFG_SYS_SBFHDR_SIZE 0x7 /* Input, PCI, Flexbus, and VCO */ #define CFG_PRAM 2048 /* 2048 KB */ #define CFG_SYS_MBAR 0xFC000000 /* * Definitions for initial stack pointer and data area (in internal SRAM) */ #define CFG_SYS_INIT_RAM_ADDR 0x80000000 /* End of used area in internal SRAM */ #define CFG_SYS_INIT_RAM_SIZE 0x10000 #define CFG_SYS_INIT_RAM_CTRL 0x221 #define CFG_SYS_INIT_SP_OFFSET ((CFG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) - 32) #define CFG_SYS_SBFHDR_DATA_OFFSET (CFG_SYS_INIT_RAM_SIZE - 32) /* * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CFG_SYS_SDRAM_BASE _must_ start at 0 */ #define CFG_SYS_SDRAM_BASE 0x40000000 #define CFG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ #define CFG_SYS_DRAM_TEST /* Reserve 256 kB for Monitor */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ /* Initial Memory map for Linux */ #define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + \ (CFG_SYS_SDRAM_SIZE << 20)) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ /* Cache Configuration */ #define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ CFG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ CFG_SYS_INIT_RAM_SIZE - 4) #define CFG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) #define CFG_SYS_DCACHE_INV (CF_CACR_DCINVA) #define CFG_SYS_CACHE_ACR2 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) #define CFG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ CF_CACR_ICINVA | CF_CACR_EUSP) #define CFG_SYS_CACHE_DCACR ((CFG_SYS_CACHE_ICACR | \ CF_CACR_DEC | CF_CACR_DDCM_P | \ CF_CACR_DCINVA) & ~CF_CACR_ICINVA) #define CACR_STATUS (CFG_SYS_INIT_RAM_ADDR + \ CFG_SYS_INIT_RAM_SIZE - 12) #endif /* __STMARK2_CONFIG_H */