/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2014 Soeren Moch <smoch@web.de> * * Configuration settings for the TBS2910 MatrixARM board. */ #ifndef __TBS2910_CONFIG_H #define __TBS2910_CONFIG_H #include "mx6_common.h" /* General configuration */ /* Physical Memory Map */ #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_BOOTMAPSZ 0x10000000 /* Framebuffer */ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP /* PCI */ #ifdef CONFIG_CMD_PCI #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) #endif /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #ifdef CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USBD_HS #endif /* CONFIG_CMD_USB_MASS_STORAGE */ #endif /* CONFIG_CMD_USB */ #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \ "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \ "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \ "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \ "${bootargs_mmc3}\0" \ "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ "rdinit=/sbin/init enable_wait_mode=off\0" \ "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \ "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ "run bootargs_upd; " \ "bootm 0x10800000 0x10d00000\0" \ "console=ttymxc0\0" \ "fan=gpio set 92\0" \ "fdt_addr_r=0x18000000\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "kernel_addr_r=0x12000000\0" \ "pxefile_addr_r=0x10100000\0" \ "ramdisk_addr_r=0x18080000\0" \ "scriptaddr=0x10000000\0" \ "set_con_serial=setenv stdout serial; " \ "setenv stderr serial\0" \ "set_con_hdmi=setenv stdout serial,vidconsole; " \ "setenv stderr serial,vidconsole\0" \ "stderr=serial,vidconsole\0" \ "stdin=serial,usbkbd\0" \ "stdout=serial,vidconsole\0" /* Enable distro boot */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ func(SATA, sata, 0) \ func(USB, usb, 0) #include <config_distro_bootcmd.h> #endif /* __TBS2910_CONFIG_H * */