menu "ARM architecture" depends on ARM config SYS_ARCH default "arm" config ARM64 bool select PHYS_64BIT select SYS_CACHE_SHIFT_6 if ARM64 config POSITION_INDEPENDENT bool "Generate position-independent pre-relocation code" help U-Boot expects to be linked to a specific hard-coded address, and to be loaded to and run from that address. This option lifts that restriction, thus allowing the code to be loaded to and executed from almost any address. This logic relies on the relocation information that is embedded into the binary to support U-Boot relocating itself to the top-of-RAM later during execution. config INIT_SP_RELATIVE bool "Specify the early stack pointer relative to the .bss section" help U-Boot typically uses a hard-coded value for the stack pointer before relocation. Enable this option to instead calculate the initial SP at run-time. This is useful to avoid hard-coding addresses into U-Boot, so that can be loaded and executed at arbitrary addresses and thus avoid using arbitrary addresses at runtime. If this option is enabled, the early stack pointer is set to &_bss_start with a offset value added. The offset is specified by SYS_INIT_SP_BSS_OFFSET. config SYS_INIT_SP_BSS_OFFSET int "Early stack offset from the .bss base address" depends on INIT_SP_RELATIVE default 524288 help This option's value is the offset added to &_bss_start in order to calculate the stack pointer. This offset should be large enough so that the early malloc region, global data (gd), and early stack usage do not overlap any appended DTB. config LINUX_KERNEL_IMAGE_HEADER bool help Place a Linux kernel image header at the start of the U-Boot binary. The format of the header is described in the Linux kernel source at Documentation/arm64/booting.txt. This feature is useful since the image header reports the amount of memory (BSS and similar) that U-Boot needs to use, but which isn't part of the binary. if LINUX_KERNEL_IMAGE_HEADER config LNX_KRNL_IMG_TEXT_OFFSET_BASE hex help The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the TEXT_OFFSET value written in to the Linux kernel image header. endif endif config STATIC_RELA bool default y if ARM64 && !POSITION_INDEPENDENT config DMA_ADDR_T_64BIT bool default y if ARM64 config HAS_VBAR bool config HAS_THUMB2 bool # Used for compatibility with asm files copied from the kernel config ARM_ASM_UNIFIED bool default y # Used for compatibility with asm files copied from the kernel config THUMB2_KERNEL bool config SYS_ICACHE_OFF bool "Do not enable icache" default n help Do not enable instruction cache in U-Boot. config SPL_SYS_ICACHE_OFF bool "Do not enable icache in SPL" depends on SPL default SYS_ICACHE_OFF help Do not enable instruction cache in SPL. config SYS_DCACHE_OFF bool "Do not enable dcache" default n help Do not enable data cache in U-Boot. config SPL_SYS_DCACHE_OFF bool "Do not enable dcache in SPL" depends on SPL default SYS_DCACHE_OFF help Do not enable data cache in SPL. config SYS_ARM_CACHE_CP15 bool "CP15 based cache enabling support" help Select this if your processor suports enabling caches by using CP15 registers. config SYS_ARM_MMU bool "MMU-based Paged Memory Management Support" select SYS_ARM_CACHE_CP15 help Select if you want MMU-based virtualised addressing space support by paged memory management. config SYS_ARM_MPU bool 'Use the ARM v7 PMSA Compliant MPU' help Some ARM systems without an MMU have instead a Memory Protection Unit (MPU) that defines the type and permissions for regions of memory. If your CPU has an MPU then you should choose 'y' here unless you know that you do not want to use the MPU. # If set, the workarounds for these ARM errata are applied early during U-Boot # startup. Note that in general these options force the workarounds to be # applied; no CPU-type/version detection exists, unlike the similar options in # the Linux kernel. Do not set these options unless they apply! Also note that # the following can be machine specific errata. These do have ability to # provide rudimentary version and machine specific checks, but expect no # product checks: # CONFIG_ARM_ERRATA_430973 # CONFIG_ARM_ERRATA_454179 # CONFIG_ARM_ERRATA_621766 # CONFIG_ARM_ERRATA_798870 # CONFIG_ARM_ERRATA_801819 # CONFIG_ARM_CORTEX_A8_CVE_2017_5715 # CONFIG_ARM_CORTEX_A15_CVE_2017_5715 config ARM_ERRATA_430973 bool config ARM_ERRATA_454179 bool config ARM_ERRATA_621766 bool config ARM_ERRATA_716044 bool config ARM_ERRATA_725233 bool config ARM_ERRATA_742230 bool config ARM_ERRATA_743622 bool config ARM_ERRATA_751472 bool config ARM_ERRATA_761320 bool config ARM_ERRATA_773022 bool config ARM_ERRATA_774769 bool config ARM_ERRATA_794072 bool config ARM_ERRATA_798870 bool config ARM_ERRATA_801819 bool config ARM_ERRATA_826974 bool config ARM_ERRATA_828024 bool config ARM_ERRATA_829520 bool config ARM_ERRATA_833069 bool config ARM_ERRATA_833471 bool config ARM_ERRATA_845369 bool config ARM_ERRATA_852421 bool config ARM_ERRATA_852423 bool config ARM_ERRATA_855873 bool config ARM_CORTEX_A8_CVE_2017_5715 bool config ARM_CORTEX_A15_CVE_2017_5715 bool config CPU_ARM720T bool select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config CPU_ARM920T bool select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config CPU_ARM926EJS bool select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config CPU_ARM946ES bool select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config CPU_ARM1136 bool select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config CPU_ARM1176 bool select HAS_VBAR select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config CPU_V7A bool select HAS_THUMB2 select HAS_VBAR select SYS_CACHE_SHIFT_6 imply SYS_ARM_MMU config CPU_V7M bool select HAS_THUMB2 select SYS_ARM_MPU select SYS_CACHE_SHIFT_5 select SYS_THUMB_BUILD select THUMB2_KERNEL config CPU_V7R bool select HAS_THUMB2 select SYS_ARM_CACHE_CP15 select SYS_ARM_MPU select SYS_CACHE_SHIFT_6 config CPU_PXA bool select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config CPU_SA1100 bool select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU config SYS_CPU default "arm720t" if CPU_ARM720T default "arm920t" if CPU_ARM920T default "arm926ejs" if CPU_ARM926EJS default "arm946es" if CPU_ARM946ES default "arm1136" if CPU_ARM1136 default "arm1176" if CPU_ARM1176 default "armv7" if CPU_V7A default "armv7" if CPU_V7R default "armv7m" if CPU_V7M default "pxa" if CPU_PXA default "sa1100" if CPU_SA1100 default "armv8" if ARM64 config SYS_ARM_ARCH int default 4 if CPU_ARM720T default 4 if CPU_ARM920T default 5 if CPU_ARM926EJS default 5 if CPU_ARM946ES default 6 if CPU_ARM1136 default 6 if CPU_ARM1176 default 7 if CPU_V7A default 7 if CPU_V7M default 7 if CPU_V7R default 5 if CPU_PXA default 4 if CPU_SA1100 default 8 if ARM64 config SYS_CACHE_SHIFT_5 bool config SYS_CACHE_SHIFT_6 bool config SYS_CACHE_SHIFT_7 bool config SYS_CACHELINE_SIZE int default 128 if SYS_CACHE_SHIFT_7 default 64 if SYS_CACHE_SHIFT_6 default 32 if SYS_CACHE_SHIFT_5 config ARCH_CPU_INIT bool "Enable ARCH_CPU_INIT" help Some architectures require a call to arch_cpu_init() Say Y here to enable it config SYS_ARCH_TIMER bool "ARM Generic Timer support" depends on CPU_V7A || ARM64 default y if ARM64 help The ARM Generic Timer (aka arch-timer) provides an architected interface to a timer source on an SoC. It is mandantory for ARMv8 implementation and widely available on ARMv7 systems. config ARM_SMCCC bool "Support for ARM SMC Calling Convention (SMCCC)" depends on CPU_V7A || ARM64 select ARM_PSCI_FW help Say Y here if you want to enable ARM SMC Calling Convention. This should be enabled if U-Boot needs to communicate with system firmware (for example, PSCI) according to SMCCC. config SEMIHOSTING bool "support boot from semihosting" help In emulated environments, semihosting is a way for the hosted environment to call out to the emulator to retrieve files from the host machine. config SYS_THUMB_BUILD bool "Build U-Boot using the Thumb instruction set" depends on !ARM64 help Use this flag to build U-Boot using the Thumb instruction set for ARM architectures. Thumb instruction set provides better code density. For ARM architectures that support Thumb2 this flag will result in Thumb2 code generated by GCC. config SPL_SYS_THUMB_BUILD bool "Build SPL using the Thumb instruction set" default y if SYS_THUMB_BUILD depends on !ARM64 && SPL help Use this flag to build SPL using the Thumb instruction set for ARM architectures. Thumb instruction set provides better code density. For ARM architectures that support Thumb2 this flag will result in Thumb2 code generated by GCC. config TPL_SYS_THUMB_BUILD bool "Build TPL using the Thumb instruction set" default y if SYS_THUMB_BUILD depends on TPL && !ARM64 help Use this flag to build SPL using the Thumb instruction set for ARM architectures. Thumb instruction set provides better code density. For ARM architectures that support Thumb2 this flag will result in Thumb2 code generated by GCC. config SYS_L2CACHE_OFF bool "L2cache off" help If SoC does not support L2CACHE or one do not want to enable L2CACHE, choose this option. config ENABLE_ARM_SOC_BOOT0_HOOK bool "prepare BOOT0 header" help If the SoC's BOOT0 requires a header area filled with (magic) values, then choose this option, and create a file included as which contains the required assembler code. config ARM_CORTEX_CPU_IS_UP bool default n config USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy" default y depends on !ARM64 help Enable the generation of an optimized version of memcpy. Such implementation may be faster under some conditions but may increase the binary size. config SPL_USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy for SPL" default y if USE_ARCH_MEMCPY depends on !ARM64 && SPL help Enable the generation of an optimized version of memcpy. Such implementation may be faster under some conditions but may increase the binary size. config TPL_USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy for TPL" default y if USE_ARCH_MEMCPY depends on !ARM64 && TPL help Enable the generation of an optimized version of memcpy. Such implementation may be faster under some conditions but may increase the binary size. config USE_ARCH_MEMSET bool "Use an assembly optimized implementation of memset" default y depends on !ARM64 help Enable the generation of an optimized version of memset. Such implementation may be faster under some conditions but may increase the binary size. config SPL_USE_ARCH_MEMSET bool "Use an assembly optimized implementation of memset for SPL" default y if USE_ARCH_MEMSET depends on !ARM64 && SPL help Enable the generation of an optimized version of memset. Such implementation may be faster under some conditions but may increase the binary size. config TPL_USE_ARCH_MEMSET bool "Use an assembly optimized implementation of memset for TPL" default y if USE_ARCH_MEMSET depends on !ARM64 && TPL help Enable the generation of an optimized version of memset. Such implementation may be faster under some conditions but may increase the binary size. config ARM64_SUPPORT_AARCH32 bool "ARM64 system support AArch32 execution state" depends on ARM64 default y if !TARGET_THUNDERX_88XX help This ARM64 system supports AArch32 execution state. choice prompt "Target select" default TARGET_HIKEY config ARCH_AT91 bool "Atmel AT91" select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB config TARGET_EDB93XX bool "Support edb93xx" select CPU_ARM920T select PL010_SERIAL config TARGET_ASPENITE bool "Support aspenite" select CPU_ARM926EJS config TARGET_GPLUGD bool "Support gplugd" select CPU_ARM926EJS config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926EJS imply CMD_SAVES help Support for TI's DaVinci platform. config KIRKWOOD bool "Marvell Kirkwood" select ARCH_MISC_INIT select BOARD_EARLY_INIT_F select CPU_ARM926EJS config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" select DM select DM_ETH select DM_SERIAL select DM_SPI select DM_SPI_FLASH select OF_CONTROL select OF_SEPARATE select SPI imply CMD_DM config TARGET_APF27 bool "Support apf27" select CPU_ARM926EJS select SUPPORT_SPL config ORION5X bool "Marvell Orion" select CPU_ARM926EJS config TARGET_SPEAR300 bool "Support spear300" select BOARD_EARLY_INIT_F select CPU_ARM926EJS select PL011_SERIAL imply CMD_SAVES config TARGET_SPEAR310 bool "Support spear310" select BOARD_EARLY_INIT_F select CPU_ARM926EJS select PL011_SERIAL imply CMD_SAVES config TARGET_SPEAR320 bool "Support spear320" select BOARD_EARLY_INIT_F select CPU_ARM926EJS select PL011_SERIAL imply CMD_SAVES config TARGET_SPEAR600 bool "Support spear600" select BOARD_EARLY_INIT_F select CPU_ARM926EJS select PL011_SERIAL imply CMD_SAVES config TARGET_STV0991 bool "Support stv0991" select CPU_V7A select DM select DM_SERIAL select DM_SPI select DM_SPI_FLASH select PL01X_SERIAL select SPI select SPI_FLASH imply CMD_DM config TARGET_X600 bool "Support x600" select BOARD_LATE_INIT select CPU_ARM926EJS select PL011_SERIAL select SUPPORT_SPL config TARGET_WOODBURN bool "Support woodburn" select CPU_ARM1136 config TARGET_WOODBURN_SD bool "Support woodburn_sd" select CPU_ARM1136 select SUPPORT_SPL config TARGET_FLEA3 bool "Support flea3" select CPU_ARM1136 config TARGET_MX35PDK bool "Support mx35pdk" select BOARD_LATE_INIT select CPU_ARM1136 config ARCH_BCM283X bool "Broadcom BCM283X family" select DM select DM_GPIO select DM_SERIAL select OF_CONTROL select PL01X_SERIAL select SERIAL_SEARCH_ALL imply CMD_DM imply FAT_WRITE config ARCH_BCM63158 bool "Broadcom BCM63158 family" select DM select OF_CONTROL imply CMD_DM config ARCH_BCM6858 bool "Broadcom BCM6858 family" select DM select OF_CONTROL imply CMD_DM config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select PL011_SERIAL config ARCH_BCMSTB bool "Broadcom BCM7XXX family" select CPU_V7A select DM select OF_CONTROL select OF_PRIOR_STAGE imply CMD_DM help This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. config TARGET_VEXPRESS_CA5X2 bool "Support vexpress_ca5x2" select CPU_V7A select PL011_SERIAL config TARGET_VEXPRESS_CA9X4 bool "Support vexpress_ca9x4" select CPU_V7A select PL011_SERIAL config TARGET_BCM23550_W1D bool "Support bcm23550_w1d" select CPU_V7A imply CRC32_VERIFY imply FAT_WRITE config TARGET_BCM28155_AP bool "Support bcm28155_ap" select CPU_V7A imply CRC32_VERIFY imply FAT_WRITE config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7A imply BCM_SF2_ETH imply BCM_SF2_ETH_GMAC imply CMD_HASH imply CRC32_VERIFY imply FAT_WRITE imply HASH_VERIFY imply NETDEVICES config TARGET_BCMNSP bool "Support bcmnsp" select CPU_V7A config TARGET_BCMNS2 bool "Support Broadcom Northstar2" select ARM64 help Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit ARMv8 Cortex-A57 processors targeting a broad range of networking applications config ARCH_EXYNOS bool "Samsung EXYNOS" select DM select DM_GPIO select DM_I2C select DM_KEYBOARD select DM_SERIAL select DM_SPI select DM_SPI_FLASH select SPI imply SYS_THUMB_BUILD imply CMD_DM imply FAT_WRITE config ARCH_S5PC1XX bool "Samsung S5PC1XX" select CPU_V7A select DM select DM_GPIO select DM_I2C select DM_SERIAL imply CMD_DM config ARCH_HIGHBANK bool "Calxeda Highbank" select CPU_V7A select PL011_SERIAL config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select DM select DM_SERIAL select PL01X_SERIAL imply CMD_DM config ARCH_KEYSTONE bool "TI Keystone" select CMD_POWEROFF select CPU_V7A select SUPPORT_SPL select SYS_ARCH_TIMER select SYS_THUMB_BUILD imply CMD_MTDPARTS imply CMD_SAVES imply FIT config ARCH_K3 bool "Texas Instruments' K3 Architecture" select SPL select SUPPORT_SPL select FIT config ARCH_OMAP2PLUS bool "TI OMAP2+" select CPU_V7A select SPL_BOARD_INIT if SPL select SPL_STACK_R if SPL select SUPPORT_SPL imply FIT config ARCH_MESON bool "Amlogic Meson" imply DISTRO_DEFAULTS help Support for the Meson SoC family developed by Amlogic Inc., targeted at media players and tablet computers. We currently support the S905 (GXBaby) 64-bit SoC. config ARCH_MEDIATEK bool "MediaTek SoCs" select BINMAN select DM select OF_CONTROL select SPL_DM if SPL select SPL_LIBCOMMON_SUPPORT if SPL select SPL_LIBGENERIC_SUPPORT if SPL select SPL_OF_CONTROL if SPL select SUPPORT_SPL help Support for the MediaTek SoCs family developed by MediaTek Inc. Please refer to doc/README.mediatek for more information. config ARCH_LPC32XX bool "NXP LPC32xx platform" select CPU_ARM926EJS select DM select DM_GPIO select DM_SERIAL select SPL_DM if SPL select SUPPORT_SPL imply CMD_DM config ARCH_IMX8 bool "NXP i.MX8 platform" select ARM64 select DM select OF_CONTROL config ARCH_IMX8M bool "NXP i.MX8M platform" select ARM64 select DM select SUPPORT_SPL imply CMD_DM config ARCH_MX23 bool "NXP i.MX23 family" select CPU_ARM926EJS select PL011_SERIAL select SUPPORT_SPL config ARCH_MX25 bool "NXP MX25" select CPU_ARM926EJS imply MXC_GPIO config ARCH_MX28 bool "NXP i.MX28 family" select CPU_ARM926EJS select PL011_SERIAL select SUPPORT_SPL config ARCH_MX31 bool "NXP i.MX31 family" select CPU_ARM1136 config ARCH_MX7ULP bool "NXP MX7ULP" select CPU_V7A select ROM_UNIFIED_SECTIONS imply MXC_GPIO config ARCH_MX7 bool "Freescale MX7" select ARCH_MISC_INIT select BOARD_EARLY_INIT_F select CPU_V7A select SYS_FSL_HAS_SEC if SECURE_BOOT select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE imply MXC_GPIO config ARCH_MX6 bool "Freescale MX6" select CPU_V7A select SYS_FSL_HAS_SEC if SECURE_BOOT select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select SYS_THUMB_BUILD if SPL imply MXC_GPIO if ARCH_MX6 config SPL_LDSCRIPT default "arch/arm/mach-omap2/u-boot-spl.lds" endif config ARCH_MX5 bool "Freescale MX5" select BOARD_EARLY_INIT_F select CPU_V7A imply MXC_GPIO config ARCH_OWL bool "Actions Semi OWL SoCs" select ARM64 select DM select DM_SERIAL select OF_CONTROL imply CMD_DM config ARCH_QEMU bool "QEMU Virtual Platform" select ARCH_SUPPORT_TFABOOT select DM select DM_SERIAL select OF_CONTROL select PL01X_SERIAL imply CMD_DM imply DM_RTC imply RTC_PL031 config ARCH_RMOBILE bool "Renesas ARM SoCs" select BOARD_EARLY_INIT_F if !RZA1 select DM select DM_SERIAL imply CMD_DM imply FAT_WRITE imply SYS_THUMB_BUILD imply ARCH_MISC_INIT if DISPLAY_CPUINFO config TARGET_S32V234EVB bool "Support s32v234evb" select ARM64 select SYS_FSL_ERRATUM_ESDHC111 config ARCH_SNAPDRAGON bool "Qualcomm Snapdragon SoCs" select ARM64 select DM select DM_GPIO select DM_SERIAL select MSM_SMEM select OF_CONTROL select OF_SEPARATE select SMEM select SPMI imply CMD_DM config ARCH_SOCFPGA bool "Altera SOCFPGA family" select ARCH_EARLY_INIT_R select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 select ARM64 if TARGET_SOCFPGA_STRATIX10 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select DM select DM_SERIAL select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select OF_CONTROL select SPL_DM_RESET if DM_RESET select SPL_DM_SERIAL select SPL_LIBCOMMON_SUPPORT select SPL_LIBGENERIC_SUPPORT select SPL_NAND_SUPPORT if SPL_NAND_DENALI select SPL_OF_CONTROL select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 select SPL_SERIAL_SUPPORT select SPL_SYSRESET select SPL_WATCHDOG_SUPPORT select SUPPORT_SPL select SYS_NS16550 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select SYSRESET select SYSRESET_SOCFPGA if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select SYSRESET_SOCFPGA_S10 if TARGET_SOCFPGA_STRATIX10 imply CMD_DM imply CMD_MTDPARTS imply CRC32_VERIFY imply DM_SPI imply DM_SPI_FLASH imply FAT_WRITE imply SPL imply SPL_DM imply SPL_LIBDISK_SUPPORT imply SPL_MMC_SUPPORT imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE imply SPL_SPI_FLASH_SUPPORT imply SPL_SPI_SUPPORT imply L2X0_CACHE config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" select BINMAN select CMD_GPIO select CMD_MMC if MMC select CMD_USB if DISTRO_DEFAULTS select CLK select DM select DM_ETH select DM_GPIO select DM_KEYBOARD select DM_MMC if MMC select DM_SCSI if SCSI select DM_SERIAL select DM_USB if DISTRO_DEFAULTS select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE select SPECIFY_CONSOLE_INDEX select SPL_STACK_R if SPL select SPL_SYS_MALLOC_SIMPLE if SPL select SPL_SYS_THUMB_BUILD if !ARM64 select SUNXI_GPIO select SYS_NS16550 select SYS_THUMB_BUILD if !ARM64 select USB if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS select USE_TINY_PRINTF imply CMD_DM imply CMD_GPT imply CMD_UBI if NAND imply DISTRO_DEFAULTS imply FAT_WRITE imply FIT imply OF_LIBFDT_OVERLAY imply PRE_CONSOLE_BUFFER imply SPL_GPIO_SUPPORT imply SPL_LIBCOMMON_SUPPORT imply SPL_LIBGENERIC_SUPPORT imply SPL_MMC_SUPPORT if MMC imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT imply USB_GADGET config ARCH_VERSAL bool "Support Xilinx Versal Platform" select ARM64 select CLK select DM select DM_ETH if NET select DM_MMC if MMC select DM_SERIAL select OF_CONTROL config ARCH_VF610 bool "Freescale Vybrid" select CPU_V7A select SYS_FSL_ERRATUM_ESDHC111 imply CMD_MTDPARTS imply NAND config ARCH_ZYNQ bool "Xilinx Zynq based platform" select BOARD_EARLY_INIT_F if WDT select CLK select CLK_ZYNQ select CPU_V7A select DM select DM_ETH if NET select DM_MMC if MMC select DM_SERIAL select DM_SPI select DM_SPI_FLASH select DM_USB if USB select OF_CONTROL select SPI select SPL_BOARD_INIT if SPL select SPL_CLK if SPL select SPL_DM if SPL select SPL_OF_CONTROL if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL imply ARCH_EARLY_INIT_R imply BOARD_LATE_INIT imply CMD_CLK imply CMD_DM imply CMD_SPL imply FAT_WRITE config ARCH_ZYNQMP_R5 bool "Xilinx ZynqMP R5 based platform" select CLK select CPU_V7R select DM select DM_ETH if NET select DM_MMC if MMC select DM_SERIAL select OF_CONTROL imply CMD_DM imply DM_USB_GADGET config ARCH_ZYNQMP bool "Xilinx ZynqMP based platform" select ARM64 select CLK select DM select DM_ETH if NET select DM_MMC if MMC select DM_SERIAL select DM_SPI if SPI select DM_SPI_FLASH if DM_SPI select DM_USB if USB select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_CLK if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL imply BOARD_LATE_INIT imply CMD_DM imply FAT_WRITE imply MP imply DM_USB_GADGET config TEGRA bool "NVIDIA Tegra" imply DISTRO_DEFAULTS imply FAT_WRITE config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" select ARM64 select PL01X_SERIAL config TARGET_VEXPRESS64_BASE_FVP bool "Support Versatile Express ARMv8a FVP BASE model" select ARM64 select PL01X_SERIAL select SEMIHOSTING config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 select PL01X_SERIAL config TARGET_LS2080A_EMU bool "Support ls2080a_emu" select ARCH_LS2080A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select FSL_DDR_SYNC_REFRESH help Support for Freescale LS2080A_EMU platform The LS2080A Development System (EMULATOR) is a pre silicon development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" select ARCH_LS2080A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS1088AQDS bool "Support ls1088aqds" select ARCH_LS1088A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT select SUPPORT_SPL select FSL_DDR_INTERACTIVE if !SD_BOOT help Support for NXP LS1088AQDS platform The LS1088A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1088A Layerscape Architecture processor. config TARGET_LS2080AQDS bool "Support ls2080aqds" select ARCH_LS2080A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT select SUPPORT_SPL imply SCSI imply SCSI_AHCI select FSL_DDR_BIST select FSL_DDR_INTERACTIVE if !SPL help Support for Freescale LS2080AQDS platform The LS2080A Development System (QDS) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2080ARDB bool "Support ls2080ardb" select ARCH_LS2080A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT select SUPPORT_SPL select FSL_DDR_BIST select FSL_DDR_INTERACTIVE if !SPL imply SCSI imply SCSI_AHCI help Support for Freescale LS2080ARDB platform. The LS2080A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2081ARDB bool "Support ls2081ardb" select ARCH_LS2080A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL help Support for Freescale LS2081ARDB platform. The LS2081A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS2081A/LS2041A Layerscape Architecture processor. config TARGET_LX2160ARDB bool "Support lx2160ardb" select ARCH_LX2160A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT help Support for NXP LX2160ARDB platform. The lx2160ardb (LX2160A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor. config TARGET_LX2160AQDS bool "Support lx2160aqds" select ARCH_LX2160A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT help Support for NXP LX2160AQDS platform. The lx2160aqds (LX2160A QorIQ Development System (QDS) is a high-performance development platform that supports the QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor. config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 select DM select DM_GPIO select DM_SERIAL select OF_CONTROL select PL01X_SERIAL select SPECIFY_CONSOLE_INDEX imply CMD_DM help Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. config TARGET_HIKEY960 bool "Support HiKey960 96boards Consumer Edition Platform" select ARM64 select DM select DM_SERIAL select OF_CONTROL select PL01X_SERIAL imply CMD_DM help Support for HiKey960 96boards platform. It features a HI3660 SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM. config TARGET_POPLAR bool "Support Poplar 96boards Enterprise Edition Platform" select ARM64 select DM select DM_SERIAL select DM_USB select OF_CONTROL select PL01X_SERIAL imply CMD_DM help Support for Poplar 96boards EE platform. It features a HI3798cv200 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU making it capable of running any commercial set-top solution based on Linux or Android. config TARGET_LS1012AQDS bool "Support ls1012aqds" select ARCH_LS1012A select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT help Support for Freescale LS1012AQDS platform. The LS1012A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012ARDB bool "Support ls1012ardb" select ARCH_LS1012A select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT imply SCSI imply SCSI_AHCI help Support for Freescale LS1012ARDB platform. The LS1012A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012A2G5RDB bool "Support ls1012a2g5rdb" select ARCH_LS1012A select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT imply SCSI help Support for Freescale LS1012A2G5RDB platform. The LS1012A 2G5 Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012AFRWY bool "Support ls1012afrwy" select ARCH_LS1012A select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT imply SCSI imply SCSI_AHCI help Support for Freescale LS1012AFRWY platform. The LS1012A FRWY board (FRWY) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012AFRDM bool "Support ls1012afrdm" select ARCH_LS1012A select ARM64 select ARCH_SUPPORT_TFABOOT help Support for Freescale LS1012AFRDM platform. The LS1012A Freedom board (FRDM) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1028AQDS bool "Support ls1028aqds" select ARCH_LS1028A select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT select ARCH_MISC_INIT help Support for Freescale LS1028AQDS platform The LS1028A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1028A Layerscape Architecture processor. config TARGET_LS1028ARDB bool "Support ls1028ardb" select ARCH_LS1028A select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT help Support for Freescale LS1028ARDB platform The LS1028A Development System (RDB) is a high-performance development platform that supports the QorIQ LS1028A Layerscape Architecture processor. config TARGET_LS1088ARDB bool "Support ls1088ardb" select ARCH_LS1088A select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT select SUPPORT_SPL select FSL_DDR_INTERACTIVE if !SD_BOOT help Support for NXP LS1088ARDB platform. The LS1088A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS1088A Layerscape Architecture processor. config TARGET_LS1021AQDS bool "Support ls1021aqds" select ARCH_LS1021A select ARCH_SUPPORT_PSCI select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select LS1_DEEP_SLEEP select SUPPORT_SPL select SYS_FSL_DDR select FSL_DDR_INTERACTIVE imply SCSI config TARGET_LS1021ATWR bool "Support ls1021atwr" select ARCH_LS1021A select ARCH_SUPPORT_PSCI select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select LS1_DEEP_SLEEP select SUPPORT_SPL imply SCSI config TARGET_LS1021ATSN bool "Support ls1021atsn" select ARCH_LS1021A select ARCH_SUPPORT_PSCI select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select LS1_DEEP_SLEEP select SUPPORT_SPL imply SCSI config TARGET_LS1021AIOT bool "Support ls1021aiot" select ARCH_LS1021A select ARCH_SUPPORT_PSCI select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL imply SCSI help Support for Freescale LS1021AIOT platform. The LS1021A Freescale board (IOT) is a high-performance development platform that supports the QorIQ LS1021A Layerscape Architecture processor. config TARGET_LS1043AQDS bool "Support ls1043aqds" select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL select FSL_DDR_INTERACTIVE if !SPL imply SCSI imply SCSI_AHCI help Support for Freescale LS1043AQDS platform. config TARGET_LS1043ARDB bool "Support ls1043ardb" select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL help Support for Freescale LS1043ARDB platform. config TARGET_LS1046AQDS bool "Support ls1046aqds" select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select DM_SPI_FLASH if DM_SPI select SUPPORT_SPL select FSL_DDR_BIST if !SPL select FSL_DDR_INTERACTIVE if !SPL select FSL_DDR_INTERACTIVE if !SPL imply SCSI help Support for Freescale LS1046AQDS platform. The LS1046A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1046A Layerscape Architecture processor. config TARGET_LS1046ARDB bool "Support ls1046ardb" select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select DM_SPI_FLASH if DM_SPI select POWER_MC34VR500 select SUPPORT_SPL select FSL_DDR_BIST select FSL_DDR_INTERACTIVE if !SPL imply SCSI help Support for Freescale LS1046ARDB platform. The LS1046A Reference Design Board (RDB) is a high-performance development platform that supports the QorIQ LS1046A Layerscape Architecture processor. config TARGET_LS1046AFRWY bool "Support ls1046afrwy" select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select DM_SPI_FLASH if DM_SPI imply SCSI help Support for Freescale LS1046AFRWY platform. The LS1046A Freeway Board (FRWY) is a high-performance development platform that supports the QorIQ LS1046A Layerscape Architecture processor. config TARGET_H2200 bool "Support h2200" select CPU_PXA config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" select BOARD_LATE_INIT select DM select DM_GPIO select DM_I2C select DM_MMC select DM_RESET select DM_SERIAL select DM_USB select OF_BOARD_SETUP select OF_CONTROL select OF_LIBFDT select PINCTRL select SPL_BOARD_INIT if SPL select SPL_DM if SPL select SPL_LIBCOMMON_SUPPORT if SPL select SPL_LIBGENERIC_SUPPORT if SPL select SPL_OF_CONTROL if SPL select SPL_PINCTRL if SPL select SUPPORT_SPL imply CMD_DM imply DISTRO_DEFAULTS imply FAT_WRITE help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) config STM32 bool "Support STMicroelectronics STM32 MCU with cortex M" select CPU_V7M select DM select DM_SERIAL imply CMD_DM config ARCH_STI bool "Support STMicrolectronics SoCs" select BLK select CPU_V7A select DM select DM_MMC select DM_RESET select DM_SERIAL imply CMD_DM help Support for STMicroelectronics STiH407/10 SoC family. This SoC is used on Linaro 96Board STiH410-B2260 config ARCH_STM32MP bool "Support STMicroelectronics STM32MP Socs with cortex A" select ARCH_MISC_INIT select BOARD_LATE_INIT select CLK select DM select DM_GPIO select DM_RESET select DM_SERIAL select MISC select OF_CONTROL select OF_LIBFDT select OF_SYSTEM_SETUP select PINCTRL select REGMAP select SUPPORT_SPL select SYSCON select SYSRESET select SYS_THUMB_BUILD imply SPL_SYSRESET imply CMD_DM imply CMD_POWEROFF imply OF_LIBFDT_OVERLAY imply ENV_VARS_UBOOT_RUNTIME_CONFIG imply USE_PREBOOT help Support for STM32MP SoC family developed by STMicroelectronics, MPUs based on ARM cortex A core U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL). FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot chain. SPL is the unsecure FSBL for the basic boot chain. config ARCH_ROCKCHIP bool "Support Rockchip SoCs" select BLK select DM select DM_GPIO select DM_I2C select DM_MMC select DM_PWM select DM_REGULATOR select DM_SERIAL select DM_SPI select DM_SPI_FLASH select DM_USB if USB select ENABLE_ARM_SOC_BOOT0_HOOK select OF_CONTROL select SPI select SPL_DM if SPL select SPL_SYS_MALLOC_SIMPLE if SPL select SYS_MALLOC_F select SYS_THUMB_BUILD if !ARM64 imply ADC imply CMD_DM imply DEBUG_UART_BOARD_INIT imply DISTRO_DEFAULTS imply FAT_WRITE imply SARADC_ROCKCHIP imply SPL_SYSRESET imply SYS_NS16550 imply TPL_SYSRESET imply USB_FUNCTION_FASTBOOT config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" select ARM64 select OF_CONTROL select PL01X_SERIAL select SYS_CACHE_SHIFT_7 config ARCH_ASPEED bool "Support Aspeed SoCs" select DM select OF_CONTROL imply CMD_DM endchoice config ARCH_SUPPORT_TFABOOT bool config TFABOOT bool "Support for booting from TF-A" depends on ARCH_SUPPORT_TFABOOT default n help Enabling this will make a U-Boot binary that is capable of being booted via TF-A. config TI_SECURE_DEVICE bool "HS Device Type Support" depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 help If a high secure (HS) device type is being used, this config must be set. This option impacts various aspects of the build system (to create signed boot images that can be authenticated) and the code. See the doc/README.ti-secure file for further details. if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE config ISW_ENTRY_ADDR hex "Address in memory or XIP address of bootloader entry point" default 0x402F4000 if AM43XX default 0x402F0400 if AM33XX default 0x40301350 if OMAP54XX help After any reset, the boot ROM searches the boot media for a valid boot image. For non-XIP devices, the ROM then copies the image into internal memory. For all boot modes, after the ROM processes the boot image it eventually computes the entry point address depending on the device type (secure/non-secure), boot media (xip/non-xip) and image headers. endif source "arch/arm/mach-aspeed/Kconfig" source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" source "arch/arm/mach-bcmstb/Kconfig" source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-k3/Kconfig" source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/cpu/armv7/ls102xa/Kconfig" source "arch/arm/mach-imx/mx2/Kconfig" source "arch/arm/mach-imx/mx3/Kconfig" source "arch/arm/mach-imx/mx5/Kconfig" source "arch/arm/mach-imx/mx6/Kconfig" source "arch/arm/mach-imx/mx7/Kconfig" source "arch/arm/mach-imx/mx7ulp/Kconfig" source "arch/arm/mach-imx/imx8/Kconfig" source "arch/arm/mach-imx/imx8m/Kconfig" source "arch/arm/mach-imx/mxs/Kconfig" source "arch/arm/mach-omap2/Kconfig" source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-owl/Kconfig" source "arch/arm/mach-rmobile/Kconfig" source "arch/arm/mach-meson/Kconfig" source "arch/arm/mach-mediatek/Kconfig" source "arch/arm/mach-qemu/Kconfig" source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-s5pc1xx/Kconfig" source "arch/arm/mach-snapdragon/Kconfig" source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-sti/Kconfig" source "arch/arm/mach-stm32/Kconfig" source "arch/arm/mach-stm32mp/Kconfig" source "arch/arm/mach-sunxi/Kconfig" source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-uniphier/Kconfig" source "arch/arm/cpu/armv7/vf610/Kconfig" source "arch/arm/mach-zynq/Kconfig" source "arch/arm/mach-zynqmp/Kconfig" source "arch/arm/mach-versal/Kconfig" source "arch/arm/mach-zynqmp-r5/Kconfig" source "arch/arm/cpu/armv7/Kconfig" source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/mach-imx/Kconfig" source "board/bosch/shc/Kconfig" source "board/bosch/guardian/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcm963158/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" source "board/broadcom/bcmns2/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/cirrus/edb93xx/Kconfig" source "board/eets/pdu001/Kconfig" source "board/emulation/qemu-arm/Kconfig" source "board/freescale/ls2080a/Kconfig" source "board/freescale/ls2080aqds/Kconfig" source "board/freescale/ls2080ardb/Kconfig" source "board/freescale/ls1088a/Kconfig" source "board/freescale/ls1028a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1043aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" source "board/freescale/ls1021atsn/Kconfig" source "board/freescale/ls1021aiot/Kconfig" source "board/freescale/ls1046aqds/Kconfig" source "board/freescale/ls1043ardb/Kconfig" source "board/freescale/ls1046ardb/Kconfig" source "board/freescale/ls1046afrwy/Kconfig" source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" source "board/freescale/lx2160a/Kconfig" source "board/freescale/mx35pdk/Kconfig" source "board/freescale/s32v234evb/Kconfig" source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/silica/pengwyn/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st/stv0991/Kconfig" source "board/tcl/sl50/Kconfig" source "board/ucRobotics/bubblegum_96/Kconfig" source "board/birdland/bav335x/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/variscite/dart_6ul/Kconfig" source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/xilinx/Kconfig" source "board/xilinx/zynq/Kconfig" source "board/xilinx/zynqmp/Kconfig" source "arch/arm/Kconfig.debug" endmenu config SPL_LDSCRIPT default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64