#ifndef __SERIAL_H__ #define __SERIAL_H__ #include struct serial_device { /* enough bytes to match alignment of following func pointer */ char name[16]; int (*start)(void); int (*stop)(void); void (*setbrg)(void); int (*getc)(void); int (*tstc)(void); void (*putc)(const char c); void (*puts)(const char *s); #if CONFIG_POST & CONFIG_SYS_POST_UART void (*loop)(int); #endif struct serial_device *next; }; void default_serial_puts(const char *s); extern struct serial_device serial_smc_device; extern struct serial_device serial_scc_device; extern struct serial_device *default_serial_console(void); #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || \ defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \ defined(CONFIG_MICROBLAZE) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #endif extern struct serial_device eserial1_device; extern struct serial_device eserial2_device; extern struct serial_device eserial3_device; extern struct serial_device eserial4_device; extern struct serial_device eserial5_device; extern struct serial_device eserial6_device; extern void serial_register(struct serial_device *); extern void serial_initialize(void); extern void serial_stdio_init(void); extern int serial_assign(const char *name); extern void serial_reinit_all(void); /* For usbtty */ #ifdef CONFIG_USB_TTY extern int usbtty_getc(void); extern void usbtty_putc(const char c); extern void usbtty_puts(const char *str); extern int usbtty_tstc(void); #else /* stubs */ #define usbtty_getc() 0 #define usbtty_putc(a) #define usbtty_puts(a) #define usbtty_tstc() 0 #endif /* CONFIG_USB_TTY */ struct udevice; enum serial_par { SERIAL_PAR_NONE, SERIAL_PAR_ODD, SERIAL_PAR_EVEN }; #define SERIAL_PAR_SHIFT 0 #define SERIAL_PAR_MASK (0x03 << SERIAL_PAR_SHIFT) #define SERIAL_SET_PARITY(parity) \ ((parity << SERIAL_PAR_SHIFT) & SERIAL_PAR_MASK) #define SERIAL_GET_PARITY(config) \ ((config & SERIAL_PAR_MASK) >> SERIAL_PAR_SHIFT) enum serial_bits { SERIAL_5_BITS, SERIAL_6_BITS, SERIAL_7_BITS, SERIAL_8_BITS }; #define SERIAL_BITS_SHIFT 2 #define SERIAL_BITS_MASK (0x3 << SERIAL_BITS_SHIFT) #define SERIAL_SET_BITS(bits) \ ((bits << SERIAL_BITS_SHIFT) & SERIAL_BITS_MASK) #define SERIAL_GET_BITS(config) \ ((config & SERIAL_BITS_MASK) >> SERIAL_BITS_SHIFT) enum serial_stop { SERIAL_HALF_STOP, /* 0.5 stop bit */ SERIAL_ONE_STOP, /* 1 stop bit */ SERIAL_ONE_HALF_STOP, /* 1.5 stop bit */ SERIAL_TWO_STOP /* 2 stop bit */ }; #define SERIAL_STOP_SHIFT 4 #define SERIAL_STOP_MASK (0x3 << SERIAL_STOP_SHIFT) #define SERIAL_SET_STOP(stop) \ ((stop << SERIAL_STOP_SHIFT) & SERIAL_STOP_MASK) #define SERIAL_GET_STOP(config) \ ((config & SERIAL_STOP_MASK) >> SERIAL_STOP_SHIFT) #define SERIAL_CONFIG(par, bits, stop) \ (par << SERIAL_PAR_SHIFT | \ bits << SERIAL_BITS_SHIFT | \ stop << SERIAL_STOP_SHIFT) #define SERIAL_DEFAULT_CONFIG \ (SERIAL_PAR_NONE << SERIAL_PAR_SHIFT | \ SERIAL_8_BITS << SERIAL_BITS_SHIFT | \ SERIAL_ONE_STOP << SERIAL_STOP_SHIFT) /** * struct struct dm_serial_ops - Driver model serial operations * * The uclass interface is implemented by all serial devices which use * driver model. */ struct dm_serial_ops { /** * setbrg() - Set up the baud rate generator * * Adjust baud rate divisors to set up a new baud rate for this * device. Not all devices will support all rates. If the rate * cannot be supported, the driver is free to select the nearest * available rate. or return -EINVAL if this is not possible. * * @dev: Device pointer * @baudrate: New baud rate to use * @return 0 if OK, -ve on error */ int (*setbrg)(struct udevice *dev, int baudrate); /** * getc() - Read a character and return it * * If no character is available, this should return -EAGAIN without * waiting. * * @dev: Device pointer * @return character (0..255), -ve on error */ int (*getc)(struct udevice *dev); /** * putc() - Write a character * * @dev: Device pointer * @ch: character to write * @return 0 if OK, -ve on error */ int (*putc)(struct udevice *dev, const char ch); /** * pending() - Check if input/output characters are waiting * * This can be used to return an indication of the number of waiting * characters if the driver knows this (e.g. by looking at the FIFO * level). It is acceptable to return 1 if an indeterminant number * of characters is waiting. * * This method is optional. * * @dev: Device pointer * @input: true to check input characters, false for output * @return number of waiting characters, 0 for none, -ve on error */ int (*pending)(struct udevice *dev, bool input); /** * clear() - Clear the serial FIFOs/holding registers * * This method is optional. * * This quickly clears any input/output characters from the UART. * If this is not possible, but characters still exist, then it * is acceptable to return -EAGAIN (try again) or -EINVAL (not * supported). * * @dev: Device pointer * @return 0 if OK, -ve on error */ int (*clear)(struct udevice *dev); #if CONFIG_POST & CONFIG_SYS_POST_UART /** * loop() - Control serial device loopback mode * * @dev: Device pointer * @on: 1 to turn loopback on, 0 to turn if off */ int (*loop)(struct udevice *dev, int on); #endif /** * getconfig() - Get the uart configuration * (parity, 5/6/7/8 bits word length, stop bits) * * Get a current config for this device. * * @dev: Device pointer * @parity: parity to use * @bits: bits number to use * @stop: stop bits number to use * @return 0 if OK, -ve on error */ int (*getconfig)(struct udevice *dev, uint *serial_config); /** * setconfig() - Set up the uart configuration * (parity, 5/6/7/8 bits word length, stop bits) * * Set up a new config for this device. * * @dev: Device pointer * @serial_config: number of bits, parity and number of stopbits to use * @return 0 if OK, -ve on error */ int (*setconfig)(struct udevice *dev, uint serial_config); }; /** * struct serial_dev_priv - information about a device used by the uclass * * @sdev: stdio device attached to this uart * * @buf: Pointer to the RX buffer * @rd_ptr: Read pointer in the RX buffer * @wr_ptr: Write pointer in the RX buffer */ struct serial_dev_priv { struct stdio_dev *sdev; char *buf; int rd_ptr; int wr_ptr; }; /* Access the serial operations for a device */ #define serial_get_ops(dev) ((struct dm_serial_ops *)(dev)->driver->ops) void atmel_serial_initialize(void); void mcf_serial_initialize(void); void mpc85xx_serial_initialize(void); void mxc_serial_initialize(void); void ns16550_serial_initialize(void); void pl01x_serial_initialize(void); void pxa_serial_initialize(void); void sh_serial_initialize(void); #endif