/* SPDX-License-Identifier: GPL-2.0+ */ /* * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards * (C) Copyright 2013 Siemens AG * * Based on: * U-Boot file: include/configs/at91sam9260ek.h * * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design */ #ifndef __CONFIG_H #define __CONFIG_H /* * SoC must be defined first, before hardware.h is included. * In this case SoC is defined in boards.cfg. */ #include #include /* * Warning: changing CONFIG_SYS_TEXT_BASE requires * adapting the initial boot program. * Since the linker has to swallow that define, we must use a pure * hex number here! */ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ /* Misc CPU related */ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS /* * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M) /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, * leaving the correct space for initial global data structure above * that address while providing maximum stack area below. */ #define CONFIG_SYS_INIT_SP_ADDR \ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 #endif /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 /* USB DFU support */ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 #endif /* SPI EEPROM */ #define TAURUS_SPI_MASK (1 << 4) #if defined(CONFIG_SPL_BUILD) /* SPL related */ #endif /* bootstrap in spi flash , u-boot + env + linux in nandflash */ #ifndef CONFIG_SPL_BUILD #if defined(CONFIG_BOARD_AXM) #define CONFIG_EXTRA_ENV_SETTINGS \ "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \ "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \ "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \ "boot_retries=0\0" \ "ethact=macb0\0" \ "flash_nfs=run nand_kernel;run nfsargs;run addip;" \ "upgrade_available;bootm ${kernel_ram};reset\0" \ "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \ "bootm ${kernel_ram};reset\0" \ "flash_self_test=run nand_kernel;run setbootargs addtest;" \ "upgrade_available;bootm ${kernel_ram};reset\0" \ "hostname=systemone\0" \ "kernel_Off=0x00200000\0" \ "kernel_Off_fallback=0x03800000\0" \ "kernel_ram=0x21500000\0" \ "kernel_size=0x00400000\0" \ "kernel_size_fallback=0x00400000\0" \ "loads_echo=1\0" \ "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \ "${kernel_size}\0" \ "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \ "run nfsargs;run addip;upgrade_available;" \ "bootm ${kernel_ram};reset\0" \ "netdev=eth0\0" \ "nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs " \ "rw nfsroot=${serverip}:${rootpath} " \ "at91sam9_wdt.wdt_timeout=16\0" \ "partitionset_active=A\0" \ "preboot=echo;echo Type 'run flash_self' to use kernel and root " \ "filesystem on memory;echo Type 'run flash_nfs' to use " \ "kernel from memory and root filesystem over NFS;echo Type " \ "'run net_nfs' to get Kernel over TFTP and mount root " \ "filesystem over NFS;echo\0" \ "project_dir=systemone\0" \ "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0" \ "rootfs=/dev/mtdblock5\0" \ "rootfs_fallback=/dev/mtdblock7\0" \ "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops " \ "root=${rootfs} rootfstype=jffs2 panic=7 " \ "at91sam9_wdt.wdt_timeout=16\0" \ "stderr=serial\0" \ "stdin=serial\0" \ "stdout=serial\0" \ "upgrade_available=0\0" #endif #endif /* #ifndef CONFIG_SPL_BUILD */ /* Defines for SPL */ #define CONFIG_SPL_MAX_SIZE (31 * SZ_512) #define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_SIZE (256 * SZ_1M) #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } #define CONFIG_SYS_MASTER_CLOCK 132096000 #define AT91_PLL_LOCK_TIMEOUT 1000000 #define CONFIG_SYS_AT91_PLLA 0x202A3F01 #define CONFIG_SYS_MCKR 0x1300 #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10193F05 #define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS #define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO #endif