/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2014-2015 Stefan Roese */ #ifndef _CONFIG_DB_MV7846MP_GP_H #define _CONFIG_DB_MV7846MP_GP_H /* * TEXT_BASE needs to be below 16MiB, since this area is scrubbed * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. */ /* I2C */ #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE /* USB/EHCI configuration */ /* Environment in SPI NOR flash */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ /* PCIe support */ #define CONFIG_PCI_SCAN_SHOW /* NAND */ /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ #include "mv-common.h" /* * Memory layout while starting into the bin_hdr via the * BootROM: * * 0x4000.4000 - 0x4003.4000 headers space (192KiB) * 0x4000.4030 bin_hdr start address * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) * 0x4007.fffc BootROM stack top * * The address space between 0x4007.fffc and 0x400f.fff is not locked in * L2 cache thus cannot be used. */ /* SPL */ /* Defines for SPL */ /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SPD_EEPROM 0x4e #endif /* _CONFIG_DB_MV7846MP_GP_H */