// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2017-2018 NXP * Copyright 2018 congatec AG * */ #ifndef __CGTQMX8_H #define __CGTQMX8_H #include #include #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ #define CONFIG_SYS_SPL_MALLOC_START 0x00120000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 #define CONFIG_MALLOC_F_ADDR 0x00120000 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* Flat Device Tree Definitions */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 #define USDHC3_BASE_ADDR 0x5B030000 /* Boot M4 */ #define M4_BOOT_ENV \ "m4_0_image=m4_0.bin\0" \ "m4_1_image=m4_1.bin\0" \ "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_0_image}\0" \ "loadm4image_1=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_1_image}\0" \ "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ "m4boot_1=run loadm4image_1; dcache flush; bootaux ${loadaddr} 1\0" \ #ifdef CONFIG_NAND_BOOT #define MFG_NAND_PARTITION "mtdparts=gpmi-nand:128m(boot),32m(kernel),16m(dtb),8m(misc),-(rootfs) " #else #define MFG_NAND_PARTITION "" #endif #define FEC0_RESET IMX_GPIO_NR(2, 5) #define FEC0_PDOMAIN "conn_enet0" #define CONFIG_MFG_ENV_SETTINGS \ "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ "rdinit=/linuxrc " \ "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ "g_mass_storage.iSerialNumber=\"\" "\ MFG_NAND_PARTITION \ "clk_ignore_unused "\ "\0" \ "initrd_addr=0x83800000\0" \ "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ "script=boot.scr\0" \ "image=Image\0" \ "panel=NULL\0" \ "console=ttyLP0\0" \ "fdt_addr=0x83000000\0" \ "boot_fdt=try\0" \ "fdt_file=imx8qm-cgt-qmx8.dtb\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \ "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if run loadfdt; then " \ "booti ${loadaddr} - ${fdt_addr}; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "else " \ "echo wait for boot; " \ "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp rw earlycon\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ "else " \ "setenv get_cmd tftp; " \ "fi; " \ "${get_cmd} ${loadaddr} ${image}; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ "booti ${loadaddr} - ${fdt_addr}; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "else " \ "booti; " \ "fi;\0" /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 #define CONFIG_SYS_FSL_USDHC_NUM 3 #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM_1 0x80000000 #define PHYS_SDRAM_2 0x880000000 #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ #define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */ /* Networking */ #define CONFIG_FEC_MXC_PHYADDR -1 #endif /* __CGTQMX8_H */