/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2016 Timesys Corporation * Copyright (C) 2016 Advantech Corporation * Copyright (C) 2012 Freescale Semiconductor, Inc. */ #ifndef __ADVANTECH_DMSBA16_CONFIG_H #define __ADVANTECH_DMSBA16_CONFIG_H #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> #define CONFIG_BOARD_NAME "Advantech DMS-BA16" #define CONFIG_MXC_UART_BASE UART4_BASE #define CONSOLE_DEV "ttymxc3" #define CONFIG_EXTRA_BOOTARGS "panic=10" #define CONFIG_BOOT_DIR "" #define CONFIG_LOADCMD "fatload" #define CONFIG_RFSPART "2" #include "mx6_common.h" #include <linux/sizes.h> #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) /* SATA Configs */ #define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USBD_HS /* Networking Configs */ #define CONFIG_FEC_MXC #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 4 /* Serial Flash */ #define CONFIG_LOADADDR 0x12000000 #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=" CONFIG_BOOT_DIR "/uImage\0" \ "uboot=u-boot.imx\0" \ "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \ "fdt_addr=0x18000000\0" \ "boot_fdt=yes\0" \ "ip_dyn=yes\0" \ "console=" CONSOLE_DEV "\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "sddev=0\0" \ "emmcdev=1\0" \ "partnum=1\0" \ "loadcmd=" CONFIG_LOADCMD "\0" \ "rfspart=" CONFIG_RFSPART "\0" \ "update_sd_firmware=" \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ "else " \ "setenv get_cmd tftp; " \ "fi; " \ "if mmc dev ${mmcdev}; then " \ "if ${get_cmd} ${update_sd_firmware_filename}; then " \ "setexpr fw_sz ${filesize} / 0x200; " \ "setexpr fw_sz ${fw_sz} + 1; " \ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ "fi; " \ "fi\0" \ "update_sf_uboot=" \ "if tftp $loadaddr $uboot; then " \ "sf probe; " \ "sf erase 0 0xC0000; " \ "sf write $loadaddr 0x400 $filesize; " \ "echo 'U-Boot upgraded. Please reset'; " \ "fi\0" \ "setargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \ "loadbootscript=" \ "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ " source\0" \ "loadimage=" \ "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \ "tryboot=" \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ "if run loadimage; then " \ "run doboot; " \ "fi; " \ "fi;\0" \ "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \ "run setargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if run loadfdt; then " \ "bootm ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = try; then " \ "bootm; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "fi; " \ "else " \ "bootm; " \ "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ "else " \ "setenv get_cmd tftp; " \ "fi; " \ "${get_cmd} ${image}; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ "bootm ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = try; then " \ "bootm; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "fi; " \ "else " \ "bootm; " \ "fi;\0" \ #define CONFIG_BOOTCOMMAND \ "usb start; " \ "setenv dev usb; " \ "setenv devnum 0; " \ "setenv rootdev sda${rfspart}; " \ "run tryboot; " \ \ "setenv dev mmc; " \ "setenv rootdev mmcblk0p${rfspart}; " \ \ "setenv devnum ${sddev}; " \ "if mmc dev ${devnum}; then " \ "run tryboot; " \ "fi; " \ \ "setenv devnum ${emmcdev}; " \ "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \ "if mmc dev ${devnum}; then " \ "run tryboot; " \ "fi; " \ \ "bmode usb; " \ #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* FLASH and environment organization */ #define CONFIG_SYS_FSL_USDHC_NUM 3 /* Framebuffer */ #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP #define CONFIG_IMX6_PWM_PER_CLK 66000000 #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) #endif /* I2C Configs */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_MXC_I2C1 #define CONFIG_SYS_I2C_MXC_I2C2 #define CONFIG_SYS_I2C_MXC_I2C3 #endif /* __ADVANTECH_DMSBA16_CONFIG_H */