// SPDX-License-Identifier: GPL-2.0 /* * Freescale i.MX6 PCI Express Root-Complex driver * * Copyright (C) 2013 Marek Vasut * * Based on upstream Linux kernel driver: * pci-imx6.c: Sean Cross * pcie-designware.c: Jingoo Han */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 #ifdef CONFIG_MX6SX #define MX6_DBI_ADDR 0x08ffc000 #define MX6_IO_ADDR 0x08000000 #define MX6_MEM_ADDR 0x08100000 #define MX6_ROOT_ADDR 0x08f00000 #else #define MX6_DBI_ADDR 0x01ffc000 #define MX6_IO_ADDR 0x01000000 #define MX6_MEM_ADDR 0x01100000 #define MX6_ROOT_ADDR 0x01f00000 #endif #define MX6_DBI_SIZE 0x4000 #define MX6_IO_SIZE 0x100000 #define MX6_MEM_SIZE 0xe00000 #define MX6_ROOT_SIZE 0xfc000 /* PCIe Port Logic registers (memory-mapped) */ #define PL_OFFSET 0x700 #define PCIE_PL_PFLR (PL_OFFSET + 0x08) #define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16) #define PCIE_PL_PFLR_FORCE_LINK (1 << 15) #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) #define PCIE_PHY_DEBUG_R1_LINK_UP (1 << 4) #define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (1 << 29) #define PCIE_PHY_CTRL (PL_OFFSET + 0x114) #define PCIE_PHY_CTRL_DATA_LOC 0 #define PCIE_PHY_CTRL_CAP_ADR_LOC 16 #define PCIE_PHY_CTRL_CAP_DAT_LOC 17 #define PCIE_PHY_CTRL_WR_LOC 18 #define PCIE_PHY_CTRL_RD_LOC 19 #define PCIE_PHY_STAT (PL_OFFSET + 0x110) #define PCIE_PHY_STAT_DATA_LOC 0 #define PCIE_PHY_STAT_ACK_LOC 16 /* PHY registers (not memory-mapped) */ #define PCIE_PHY_RX_ASIC_OUT 0x100D #define PHY_RX_OVRD_IN_LO 0x1005 #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5) #define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3) #define PCIE_PHY_PUP_REQ (1 << 7) /* iATU registers */ #define PCIE_ATU_VIEWPORT 0x900 #define PCIE_ATU_REGION_INBOUND (0x1 << 31) #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) #define PCIE_ATU_CR1 0x904 #define PCIE_ATU_TYPE_MEM (0x0 << 0) #define PCIE_ATU_TYPE_IO (0x2 << 0) #define PCIE_ATU_TYPE_CFG0 (0x4 << 0) #define PCIE_ATU_TYPE_CFG1 (0x5 << 0) #define PCIE_ATU_CR2 0x908 #define PCIE_ATU_ENABLE (0x1 << 31) #define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) #define PCIE_ATU_LOWER_BASE 0x90C #define PCIE_ATU_UPPER_BASE 0x910 #define PCIE_ATU_LIMIT 0x914 #define PCIE_ATU_LOWER_TARGET 0x918 #define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) #define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) #define PCIE_ATU_UPPER_TARGET 0x91C struct imx_pcie_priv { void __iomem *dbi_base; void __iomem *cfg_base; struct gpio_desc reset_gpio; bool reset_active_high; }; /* * PHY access functions */ static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val) { u32 val; u32 max_iterations = 10; u32 wait_counter = 0; do { val = readl(dbi_base + PCIE_PHY_STAT); val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1; wait_counter++; if (val == exp_val) return 0; udelay(1); } while (wait_counter < max_iterations); return -ETIMEDOUT; } static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr) { u32 val; int ret; val = addr << PCIE_PHY_CTRL_DATA_LOC; writel(val, dbi_base + PCIE_PHY_CTRL); val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC); writel(val, dbi_base + PCIE_PHY_CTRL); ret = pcie_phy_poll_ack(dbi_base, 1); if (ret) return ret; val = addr << PCIE_PHY_CTRL_DATA_LOC; writel(val, dbi_base + PCIE_PHY_CTRL); ret = pcie_phy_poll_ack(dbi_base, 0); if (ret) return ret; return 0; } /* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */ static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data) { u32 val, phy_ctl; int ret; ret = pcie_phy_wait_ack(dbi_base, addr); if (ret) return ret; /* assert Read signal */ phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC; writel(phy_ctl, dbi_base + PCIE_PHY_CTRL); ret = pcie_phy_poll_ack(dbi_base, 1); if (ret) return ret; val = readl(dbi_base + PCIE_PHY_STAT); *data = val & 0xffff; /* deassert Read signal */ writel(0x00, dbi_base + PCIE_PHY_CTRL); ret = pcie_phy_poll_ack(dbi_base, 0); if (ret) return ret; return 0; } static int pcie_phy_write(void __iomem *dbi_base, int addr, int data) { u32 var; int ret; /* write addr */ /* cap addr */ ret = pcie_phy_wait_ack(dbi_base, addr); if (ret) return ret; var = data << PCIE_PHY_CTRL_DATA_LOC; writel(var, dbi_base + PCIE_PHY_CTRL); /* capture data */ var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC); writel(var, dbi_base + PCIE_PHY_CTRL); ret = pcie_phy_poll_ack(dbi_base, 1); if (ret) return ret; /* deassert cap data */ var = data << PCIE_PHY_CTRL_DATA_LOC; writel(var, dbi_base + PCIE_PHY_CTRL); /* wait for ack de-assertion */ ret = pcie_phy_poll_ack(dbi_base, 0); if (ret) return ret; /* assert wr signal */ var = 0x1 << PCIE_PHY_CTRL_WR_LOC; writel(var, dbi_base + PCIE_PHY_CTRL); /* wait for ack */ ret = pcie_phy_poll_ack(dbi_base, 1); if (ret) return ret; /* deassert wr signal */ var = data << PCIE_PHY_CTRL_DATA_LOC; writel(var, dbi_base + PCIE_PHY_CTRL); /* wait for ack de-assertion */ ret = pcie_phy_poll_ack(dbi_base, 0); if (ret) return ret; writel(0x0, dbi_base + PCIE_PHY_CTRL); return 0; } static int imx6_pcie_link_up(struct imx_pcie_priv *priv) { u32 rc, ltssm; int rx_valid, temp; /* link is debug bit 36, debug register 1 starts at bit 32 */ rc = readl(priv->dbi_base + PCIE_PHY_DEBUG_R1); if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) && !(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)) return -EAGAIN; /* * From L0, initiate MAC entry to gen2 if EP/RC supports gen2. * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2). * If (MAC/LTSSM.state == Recovery.RcvrLock) * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition * to gen2 is stuck */ pcie_phy_read(priv->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid); ltssm = readl(priv->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F; if (rx_valid & 0x01) return 0; if (ltssm != 0x0d) return 0; printf("transition to gen2 is stuck, reset PHY!\n"); pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp); temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN); pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp); udelay(3000); pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp); temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN); pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp); return 0; } /* * iATU region setup */ static int imx_pcie_regions_setup(struct imx_pcie_priv *priv) { /* * i.MX6 defines 16MB in the AXI address map for PCIe. * * That address space excepted the pcie registers is * split and defined into different regions by iATU, * with sizes and offsets as follows: * * 0x0100_0000 --- 0x010F_FFFF 1MB IORESOURCE_IO * 0x0110_0000 --- 0x01EF_FFFF 14MB IORESOURCE_MEM * 0x01F0_0000 --- 0x01FF_FFFF 1MB Cfg + Registers */ /* CMD reg:I/O space, MEM space, and Bus Master Enable */ setbits_le32(priv->dbi_base + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); /* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */ setbits_le32(priv->dbi_base + PCI_CLASS_REVISION, PCI_CLASS_BRIDGE_PCI << 16); /* Region #0 is used for Outbound CFG space access. */ writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT); writel(lower_32_bits((uintptr_t)priv->cfg_base), priv->dbi_base + PCIE_ATU_LOWER_BASE); writel(upper_32_bits((uintptr_t)priv->cfg_base), priv->dbi_base + PCIE_ATU_UPPER_BASE); writel(lower_32_bits((uintptr_t)priv->cfg_base + MX6_ROOT_SIZE), priv->dbi_base + PCIE_ATU_LIMIT); writel(0, priv->dbi_base + PCIE_ATU_LOWER_TARGET); writel(0, priv->dbi_base + PCIE_ATU_UPPER_TARGET); writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1); writel(PCIE_ATU_ENABLE, priv->dbi_base + PCIE_ATU_CR2); return 0; } /* * PCI Express accessors */ static void __iomem *get_bus_address(struct imx_pcie_priv *priv, pci_dev_t d, int where) { void __iomem *va_address; /* Reconfigure Region #0 */ writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT); if (PCI_BUS(d) < 2) writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1); else writel(PCIE_ATU_TYPE_CFG1, priv->dbi_base + PCIE_ATU_CR1); if (PCI_BUS(d) == 0) { va_address = priv->dbi_base; } else { writel(d << 8, priv->dbi_base + PCIE_ATU_LOWER_TARGET); va_address = priv->cfg_base; } va_address += (where & ~0x3); return va_address; } static int imx_pcie_addr_valid(pci_dev_t d) { if ((PCI_BUS(d) == 0) && (PCI_DEV(d) > 1)) return -EINVAL; if ((PCI_BUS(d) == 1) && (PCI_DEV(d) > 0)) return -EINVAL; return 0; } /* * Replace the original ARM DABT handler with a simple jump-back one. * * The problem here is that if we have a PCIe bridge attached to this PCIe * controller, but no PCIe device is connected to the bridges' downstream * port, the attempt to read/write from/to the config space will produce * a DABT. This is a behavior of the controller and can not be disabled * unfortuatelly. * * To work around the problem, we backup the current DABT handler address * and replace it with our own DABT handler, which only bounces right back * into the code. */ static void imx_pcie_fix_dabt_handler(bool set) { extern uint32_t *_data_abort; uint32_t *data_abort_addr = (uint32_t *)&_data_abort; static const uint32_t data_abort_bounce_handler = 0xe25ef004; uint32_t data_abort_bounce_addr = (uint32_t)&data_abort_bounce_handler; static uint32_t data_abort_backup; if (set) { data_abort_backup = *data_abort_addr; *data_abort_addr = data_abort_bounce_addr; } else { *data_abort_addr = data_abort_backup; } } static int imx_pcie_read_cfg(struct imx_pcie_priv *priv, pci_dev_t d, int where, u32 *val) { void __iomem *va_address; int ret; ret = imx_pcie_addr_valid(d); if (ret) { *val = 0xffffffff; return 0; } va_address = get_bus_address(priv, d, where); /* * Read the PCIe config space. We must replace the DABT handler * here in case we got data abort from the PCIe controller, see * imx_pcie_fix_dabt_handler() description. Note that writing the * "val" with valid value is also imperative here as in case we * did got DABT, the val would contain random value. */ imx_pcie_fix_dabt_handler(true); writel(0xffffffff, val); *val = readl(va_address); imx_pcie_fix_dabt_handler(false); return 0; } static int imx_pcie_write_cfg(struct imx_pcie_priv *priv, pci_dev_t d, int where, u32 val) { void __iomem *va_address = NULL; int ret; ret = imx_pcie_addr_valid(d); if (ret) return ret; va_address = get_bus_address(priv, d, where); /* * Write the PCIe config space. We must replace the DABT handler * here in case we got data abort from the PCIe controller, see * imx_pcie_fix_dabt_handler() description. */ imx_pcie_fix_dabt_handler(true); writel(val, va_address); imx_pcie_fix_dabt_handler(false); return 0; } /* * Initial bus setup */ static int imx6_pcie_assert_core_reset(struct imx_pcie_priv *priv, bool prepare_for_boot) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; if (is_mx6dqp()) setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST); #if defined(CONFIG_MX6SX) struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR; /* SSP_EN is not used on MX6SX anymore */ setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); /* Force PCIe PHY reset */ setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); /* Power up PCIe PHY */ setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ); #else /* * If the bootloader already enabled the link we need some special * handling to get the core back into a state where it is safe to * touch it for configuration. As there is no dedicated reset signal * wired up for MX6QDL, we need to manually force LTSSM into "detect" * state before completely disabling LTSSM, which is a prerequisite * for core configuration. * * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong * indication that the bootloader activated the link. */ if ((is_mx6dq() || is_mx6sdl()) && prepare_for_boot) { u32 val, gpr1, gpr12; gpr1 = readl(&iomuxc_regs->gpr[1]); gpr12 = readl(&iomuxc_regs->gpr[12]); if ((gpr1 & IOMUXC_GPR1_PCIE_REF_CLK_EN) && (gpr12 & IOMUXC_GPR12_PCIE_CTL_2)) { val = readl(priv->dbi_base + PCIE_PL_PFLR); val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; val |= PCIE_PL_PFLR_FORCE_LINK; imx_pcie_fix_dabt_handler(true); writel(val, priv->dbi_base + PCIE_PL_PFLR); imx_pcie_fix_dabt_handler(false); gpr12 &= ~IOMUXC_GPR12_PCIE_CTL_2; writel(val, &iomuxc_regs->gpr[12]); } } setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN); clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN); #endif return 0; } static int imx6_pcie_init_phy(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE); clrsetbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_DEVICE_TYPE_MASK, IOMUXC_GPR12_DEVICE_TYPE_RC); clrsetbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_LOS_LEVEL_MASK, IOMUXC_GPR12_LOS_LEVEL_9); #ifdef CONFIG_MX6SX clrsetbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_RX_EQ_MASK, IOMUXC_GPR12_RX_EQ_2); #endif writel((0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET) | (0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET) | (20 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET) | (127 << IOMUXC_GPR8_PCS_TX_SWING_FULL_OFFSET) | (127 << IOMUXC_GPR8_PCS_TX_SWING_LOW_OFFSET), &iomuxc_regs->gpr[8]); return 0; } __weak int imx6_pcie_toggle_power(void) { #ifdef CONFIG_PCIE_IMX_POWER_GPIO gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power"); gpio_direction_output(CONFIG_PCIE_IMX_POWER_GPIO, 0); mdelay(20); gpio_set_value(CONFIG_PCIE_IMX_POWER_GPIO, 1); mdelay(20); gpio_free(CONFIG_PCIE_IMX_POWER_GPIO); #endif return 0; } __weak int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high) { /* * See 'PCI EXPRESS BASE SPECIFICATION, REV 3.0, SECTION 6.6.1' * for detailed understanding of the PCIe CR reset logic. * * The PCIe #PERST reset line _MUST_ be connected, otherwise your * design does not conform to the specification. You must wait at * least 20 ms after de-asserting the #PERST so the EP device can * do self-initialisation. * * In case your #PERST pin is connected to a plain GPIO pin of the * CPU, you can define CONFIG_PCIE_IMX_PERST_GPIO in your board's * configuration file and the condition below will handle the rest * of the reset toggling. * * In case your #PERST toggling logic is more complex, for example * connected via CPLD or somesuch, you can override this function * in your board file and implement reset logic as needed. You must * not forget to wait at least 20 ms after de-asserting #PERST in * this case either though. * * In case your #PERST line of the PCIe EP device is not connected * at all, your design is broken and you should fix your design, * otherwise you will observe problems like for example the link * not coming up after rebooting the system back from running Linux * that uses the PCIe as well OR the PCIe link might not come up in * Linux at all in the first place since it's in some non-reset * state due to being previously used in U-Boot. */ #ifdef CONFIG_PCIE_IMX_PERST_GPIO gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset"); gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0); mdelay(20); gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1); mdelay(20); gpio_free(CONFIG_PCIE_IMX_PERST_GPIO); #else if (dm_gpio_is_valid(gpio)) { /* Assert PERST# for 20ms then de-assert */ dm_gpio_set_value(gpio, active_high ? 0 : 1); mdelay(20); dm_gpio_set_value(gpio, active_high ? 1 : 0); mdelay(20); } else { puts("WARNING: Make sure the PCIe #PERST line is connected!\n"); } #endif return 0; } static int imx6_pcie_deassert_core_reset(struct imx_pcie_priv *priv) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; imx6_pcie_toggle_power(); enable_pcie_clock(); if (is_mx6dqp()) clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST); /* * Wait for the clock to settle a bit, when the clock are sourced * from the CPU, we need about 30 ms to settle. */ mdelay(50); #if defined(CONFIG_MX6SX) /* SSP_EN is not used on MX6SX anymore */ clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); /* Clear PCIe PHY reset bit */ clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); #else /* Enable PCIe */ clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN); setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN); #endif imx6_pcie_toggle_reset(&priv->reset_gpio, priv->reset_active_high); return 0; } static int imx_pcie_link_up(struct imx_pcie_priv *priv) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; uint32_t tmp; int count = 0; imx6_pcie_assert_core_reset(priv, false); imx6_pcie_init_phy(); imx6_pcie_deassert_core_reset(priv); imx_pcie_regions_setup(priv); /* * By default, the subordinate is set equally to the secondary * bus (0x01) when the RC boots. * This means that theoretically, only bus 1 is reachable from the RC. * Force the PCIe RC subordinate to 0xff, otherwise no downstream * devices will be detected if the enumeration is applied strictly. */ tmp = readl(priv->dbi_base + 0x18); tmp |= (0xff << 16); writel(tmp, priv->dbi_base + 0x18); /* * FIXME: Force the PCIe RC to Gen1 operation * The RC must be forced into Gen1 mode before bringing the link * up, otherwise no downstream devices are detected. After the * link is up, a managed Gen1->Gen2 transition can be initiated. */ tmp = readl(priv->dbi_base + 0x7c); tmp &= ~0xf; tmp |= 0x1; writel(tmp, priv->dbi_base + 0x7c); /* LTSSM enable, starting link. */ setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE); while (!imx6_pcie_link_up(priv)) { udelay(10); count++; if (count >= 4000) { #ifdef CONFIG_PCI_SCAN_SHOW puts("PCI: pcie phy link never came up\n"); #endif debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", readl(priv->dbi_base + PCIE_PHY_DEBUG_R0), readl(priv->dbi_base + PCIE_PHY_DEBUG_R1)); return -EINVAL; } } return 0; } #if !CONFIG_IS_ENABLED(DM_PCI) static struct imx_pcie_priv imx_pcie_priv = { .dbi_base = (void __iomem *)MX6_DBI_ADDR, .cfg_base = (void __iomem *)MX6_ROOT_ADDR, }; static struct imx_pcie_priv *priv = &imx_pcie_priv; static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d, int where, u32 *val) { struct imx_pcie_priv *priv = hose->priv_data; return imx_pcie_read_cfg(priv, d, where, val); } static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d, int where, u32 val) { struct imx_pcie_priv *priv = hose->priv_data; return imx_pcie_write_cfg(priv, d, where, val); } void imx_pcie_init(void) { /* Static instance of the controller. */ static struct pci_controller pcc; struct pci_controller *hose = &pcc; int ret; memset(&pcc, 0, sizeof(pcc)); hose->priv_data = priv; /* PCI I/O space */ pci_set_region(&hose->regions[0], MX6_IO_ADDR, MX6_IO_ADDR, MX6_IO_SIZE, PCI_REGION_IO); /* PCI memory space */ pci_set_region(&hose->regions[1], MX6_MEM_ADDR, MX6_MEM_ADDR, MX6_MEM_SIZE, PCI_REGION_MEM); /* System memory space */ pci_set_region(&hose->regions[2], MMDC0_ARB_BASE_ADDR, MMDC0_ARB_BASE_ADDR, 0xefffffff, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); hose->region_count = 3; pci_set_ops(hose, pci_hose_read_config_byte_via_dword, pci_hose_read_config_word_via_dword, imx_pcie_read_config, pci_hose_write_config_byte_via_dword, pci_hose_write_config_word_via_dword, imx_pcie_write_config); /* Start the controller. */ ret = imx_pcie_link_up(priv); if (!ret) { pci_register_hose(hose); hose->last_busno = pci_hose_scan(hose); } } void imx_pcie_remove(void) { imx6_pcie_assert_core_reset(priv, true); } /* Probe function. */ void pci_init_board(void) { imx_pcie_init(); } #else static int imx_pcie_dm_read_config(const struct udevice *dev, pci_dev_t bdf, uint offset, ulong *value, enum pci_size_t size) { struct imx_pcie_priv *priv = dev_get_priv(dev); u32 tmpval; int ret; ret = imx_pcie_read_cfg(priv, bdf, offset, &tmpval); if (ret) return ret; *value = pci_conv_32_to_size(tmpval, offset, size); return 0; } static int imx_pcie_dm_write_config(struct udevice *dev, pci_dev_t bdf, uint offset, ulong value, enum pci_size_t size) { struct imx_pcie_priv *priv = dev_get_priv(dev); u32 tmpval, newval; int ret; ret = imx_pcie_read_cfg(priv, bdf, offset, &tmpval); if (ret) return ret; newval = pci_conv_size_to_32(tmpval, value, offset, size); return imx_pcie_write_cfg(priv, bdf, offset, newval); } static int imx_pcie_dm_probe(struct udevice *dev) { struct imx_pcie_priv *priv = dev_get_priv(dev); /* if PERST# valid from dt then assert it */ gpio_request_by_name(dev, "reset-gpio", 0, &priv->reset_gpio, GPIOD_IS_OUT); priv->reset_active_high = dev_read_bool(dev, "reset-gpio-active-high"); if (dm_gpio_is_valid(&priv->reset_gpio)) { dm_gpio_set_value(&priv->reset_gpio, priv->reset_active_high ? 0 : 1); } return imx_pcie_link_up(priv); } static int imx_pcie_dm_remove(struct udevice *dev) { struct imx_pcie_priv *priv = dev_get_priv(dev); imx6_pcie_assert_core_reset(priv, true); return 0; } static int imx_pcie_of_to_plat(struct udevice *dev) { struct imx_pcie_priv *priv = dev_get_priv(dev); priv->dbi_base = (void __iomem *)devfdt_get_addr_index(dev, 0); priv->cfg_base = (void __iomem *)devfdt_get_addr_index(dev, 1); if (!priv->dbi_base || !priv->cfg_base) return -EINVAL; return 0; } static const struct dm_pci_ops imx_pcie_ops = { .read_config = imx_pcie_dm_read_config, .write_config = imx_pcie_dm_write_config, }; static const struct udevice_id imx_pcie_ids[] = { { .compatible = "fsl,imx6q-pcie" }, { .compatible = "fsl,imx6sx-pcie" }, { } }; U_BOOT_DRIVER(imx_pcie) = { .name = "imx_pcie", .id = UCLASS_PCI, .of_match = imx_pcie_ids, .ops = &imx_pcie_ops, .probe = imx_pcie_dm_probe, .remove = imx_pcie_dm_remove, .of_to_plat = imx_pcie_of_to_plat, .priv_auto = sizeof(struct imx_pcie_priv), .flags = DM_FLAG_OS_PREPARE, }; #endif