/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2017 NXP * Copyright 2019-2021 Traverse Technologies */ #ifndef __TEN64_H #define __TEN64_H #include "ls1088a_common.h" #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd" #define SD_BOOTCOMMAND "run distro_bootcmd" #define QSPI_MC_INIT_CMD \ "sf probe 0:0 && sf read 0x80000000 0x300000 0x200000 &&" \ "sf read 0x80200000 0x5C0000 0x40000 &&" \ "fsl_mc start mc 0x80000000 0x80200000 && " \ "sf read 0x80300000 0x580000 0x40000 && fsl_mc lazyapply DPL 0x80300000\0" #define SD_MC_INIT_CMD \ "mmcinfo; fatload mmc 0 0x80000000 mcfirmware/mc_ls1088a.itb; "\ "fatload mmc 0 0x80200000 dpaa2config/dpc.0x1D-0x0D.dtb; "\ "fsl_mc start mc 0x80000000 0x80200000\0" #define BOOT_TARGET_DEVICES(func) \ func(NVME, nvme, 0) \ func(USB, usb, 0) \ func(MMC, mmc, 0) \ func(SCSI, scsi, 0) \ func(DHCP, dhcp, 0) \ func(PXE, pxe, 0) #include <config_distro_bootcmd.h> #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "BOARD=ten64\0" \ "fdt_addr_r=0x90000000\0" \ "fdt_high=0xa0000000\0" \ "kernel_addr_r=0x81000000\0" \ "load_addr=0xa0000000\0" \ BOOTENV \ "load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r && " \ "fdt resize && fdt boardsetup\0" \ "bootcmd_recovery=mtd read recovery 0xa0000000; mtd read dpl 0x80100000 && " \ "fsl_mc apply DPL 0x80100000 && bootm 0xa0000000#ten64\0" #endif /* __TEN64_H */