/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2017-2018 NXP */ #ifndef __LS1088_COMMON_H #define __LS1088_COMMON_H /* SPL build */ #ifdef CONFIG_SPL_BUILD #define SPL_NO_BOARDINFO #define SPL_NO_QIXIS #define SPL_NO_PCI #define SPL_NO_ENV #define SPL_NO_RTC #define SPL_NO_USB #define SPL_NO_SATA #define SPL_NO_QSPI #define SPL_NO_IFC #undef CONFIG_DISPLAY_CPUINFO #endif #define CONFIG_REMAKE_ELF #include #include #include #define LS1088ARDB_PB_BOARD 0x4A /* Link Definitions */ #ifdef CONFIG_TFABOOT #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #else #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) #endif /* Link Definitions */ #define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 /* * SMP Definitinos */ #define CPU_RELEASE_ADDR secondary_boot_addr /* GPIO */ #ifdef CONFIG_DM_GPIO #ifndef CONFIG_MPC8XXX_GPIO #define CONFIG_MPC8XXX_GPIO #endif #endif /* I2C */ /* Serial Port */ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) #if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) /* IFC */ #define CONFIG_FSL_IFC #endif /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet * and FPGA. This region is divided as below: * 0x30000000 - 0x37ffffff : 128MB : NOR flash * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet * 0x3C000000 - 0x40000000 : 64MB : FPGA etc * * To accommodate bigger NOR flash and other devices, we will map IFC * chip selects to as below: * 0x5_1000_0000..0x5_1fff_ffff Memory Hole * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB) * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) * * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting */ #define CONFIG_SYS_FLASH_BASE 0x580000000ULL #define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 #define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 #ifndef __ASSEMBLY__ unsigned long long get_qixis_addr(void); #endif #define QIXIS_BASE get_qixis_addr() #define QIXIS_BASE_PHYS 0x20000000 #define QIXIS_BASE_PHYS_EARLY 0xC000000 #define CONFIG_SYS_NAND_BASE 0x530000000ULL #define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 /* MC firmware */ /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 /* Define phy_reset function to boot the MC based on mcinitcmd. * This happens late enough to properly fixup u-boot env MAC addresses. */ #define CONFIG_RESET_PHY_R /* * Carve out a DDR region which will not be used by u-boot/Linux * * It will be used by MC and Debug Server. The MC region must be * 512MB aligned, so the min size to hide is 512MB. */ #if defined(CONFIG_FSL_MC_ENET) #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif /* Miscellaneous configurable options */ /* SATA */ #ifdef CONFIG_SCSI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) #endif /* Physical Memory Map */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 /* #define CONFIG_DISPLAY_CPUINFO */ #ifndef SPL_NO_ENV /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "console=ttyAMA0,38400n8\0" \ "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" #endif /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_MAXARGS 64 /* max command args */ #ifdef CONFIG_SPL #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 #define CONFIG_SPL_MAX_SIZE 0x16000 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* * HDR would be appended at end of image and copied to DDR along * with U-Boot image. Here u-boot max. size is 512K. So if binary * size increases then increase this size in case of secure boot as * it uses raw u-boot image instead of fit image. */ #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) #else #define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* ifdef CONFIG_NXP_ESBC */ #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #endif /* __LS1088_COMMON_H */