// SPDX-License-Identifier: GPL-2.0+ /* * Devicetree file for running sandbox tests * * This includes lots of extra devices used by various tests. * * Note that SPL use the main sandbox.dts file */ /dts-v1/; #include #include #include #include #include / { model = "sandbox"; compatible = "sandbox"; #address-cells = <1>; #size-cells = <1>; aliases { console = &uart0; ethernet0 = "/eth@10002000"; ethernet2 = &swp_0; ethernet3 = ð_3; ethernet4 = &dsa_eth0; ethernet5 = ð_5; ethernet6 = "/eth@10004000"; ethernet7 = &swp_1; ethernet8 = &phy_eth0; gpio1 = &gpio_a; gpio2 = &gpio_b; gpio3 = &gpio_c; i2c0 = "/i2c@0"; mmc0 = "/mmc0"; mmc1 = "/mmc1"; mmc2 = "/mmc2"; mmc3 = "/mmc3"; mmc4 = "/mmc4"; mmc5 = "/mmc5"; pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; remoteproc0 = &rproc_1; remoteproc1 = &rproc_2; rtc0 = &rtc_0; rtc1 = &rtc_1; spi0 = "/spi@0"; testfdt6 = "/e-test"; testbus3 = "/some-bus"; testfdt0 = "/some-bus/c-test@0"; testfdt12 = "/some-bus/c-test@1"; testfdt3 = "/b-test"; testfdt5 = "/some-bus/c-test@5"; testfdt8 = "/a-test"; testfdtm1 = &testfdtm1; fdt-dummy0 = "/translation-test@8000/dev@0,0"; fdt-dummy1 = "/translation-test@8000/dev@1,100"; fdt-dummy2 = "/translation-test@8000/dev@2,200"; fdt-dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42"; usb0 = &usb_0; usb1 = &usb_1; usb2 = &usb_2; axi0 = &axi; osd0 = "/osd"; }; binman: binman { }; config { testing-bool; testing-int = <123>; testing-str = "testing"; environment { from_fdt = "yes"; fdt_env_path = ""; }; }; options { u-boot { compatible = "u-boot,config"; bootscr-ram-offset = /bits/ 64 <0x12345678>; bootscr-flash-offset = /bits/ 64 <0>; bootscr-flash-size = /bits/ 64 <0x2000>; }; }; bootstd { bootph-verify; compatible = "u-boot,boot-std"; filename-prefixes = "/", "/boot/"; bootdev-order = "mmc2", "mmc1"; extlinux { compatible = "u-boot,extlinux"; }; efi { compatible = "u-boot,distro-efi"; }; theme { font-size = <30>; menu-inset = <3>; menuitem-gap-y = <1>; }; cedit-theme { font-size = <30>; menu-inset = <3>; menuitem-gap-y = <1>; }; /* * This is used for the VBE OS-request tests. A FAT filesystem * created in a partition with the VBE information appearing * before the partition starts */ firmware0 { bootph-verify; compatible = "fwupd,vbe-simple"; storage = "mmc1"; skip-offset = <0x200>; area-start = <0x400>; area-size = <0x1000>; state-offset = <0x400>; state-size = <0x40>; version-offset = <0x800>; version-size = <0x100>; }; /* * This is used for the VBE VPL tests. The MMC device holds the * binman image.bin file. The test progresses through each phase * of U-Boot, loading each in turn from MMC. * * Note that the test enables this node (and mmc3) before * running U-Boot */ firmware1 { bootph-verify; status = "disabled"; compatible = "fwupd,vbe-simple"; storage = "mmc3"; skip-offset = <0x800000>; area-start = <0>; area-size = <0xe00000>; state-offset = <0xdffc00>; state-size = <0x40>; version-offset = <0xdffe00>; version-size = <0x100>; }; }; cedit: cedit { }; fuzzing-engine { compatible = "sandbox,fuzzing-engine"; }; reboot-mode0 { compatible = "reboot-mode-gpio"; gpios = <&gpio_c 0 GPIO_ACTIVE_HIGH>, <&gpio_c 1 GPIO_ACTIVE_HIGH>; u-boot,env-variable = "bootstatus"; mode-test = <0x01>; mode-download = <0x03>; }; reboot_mode1: reboot-mode@14 { compatible = "reboot-mode-rtc"; rtc = <&rtc_0>; reg = <0x30 4>; u-boot,env-variable = "bootstatus"; big-endian; mode-test = <0x21969147>; mode-download = <0x51939147>; }; audio: audio-codec { compatible = "sandbox,audio-codec"; #sound-dai-cells = <1>; }; buttons { compatible = "gpio-keys"; btn1 { gpios = <&gpio_a 3 0>; label = "button1"; linux,code = ; }; btn2 { gpios = <&gpio_a 4 0>; label = "button2"; linux,code = ; }; }; buttons2 { compatible = "adc-keys"; io-channels = <&adc 3>; keyup-threshold-microvolt = <3000000>; button-up { label = "button3"; linux,code = ; press-threshold-microvolt = <1500000>; }; button-down { label = "button4"; linux,code = ; press-threshold-microvolt = <1000000>; }; button-enter { label = "button5"; linux,code = ; press-threshold-microvolt = <500000>; }; }; cros_ec: cros-ec { reg = <0 0>; compatible = "google,cros-ec-sandbox"; /* * This describes the flash memory within the EC. Note * that the STM32L flash erases to 0, not 0xff. */ flash { image-pos = <0x08000000>; size = <0x20000>; erase-value = <0>; /* Information for sandbox */ ro { image-pos = <0>; size = <0xf000>; }; wp-ro { image-pos = <0xf000>; size = <0x1000>; used = <0x884>; compress = "lz4"; uncomp-size = <0xcf8>; hash { algo = "sha256"; value = [00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f]; }; }; rw { image-pos = <0x10000>; size = <0x10000>; }; }; cros_ec_pwm: cros-ec-pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; }; dsi_host: dsi_host { compatible = "sandbox,dsi-host"; }; a-test { reg = <0 1>; compatible = "denx,u-boot-fdt-test"; ping-expect = <0>; ping-add = <0>; bootph-all; test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 GPIO_ACTIVE_HIGH 3 2 1>, <0>, <&gpio_a 12>; test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 GPIO_ACTIVE_LOW 3 2 1>, <&gpio_b 7 GPIO_IN 3 2 1>, <&gpio_b 8 GPIO_OUT 3 2 1>, <&gpio_b 9 (GPIO_OUT|GPIO_OUT_ACTIVE) 3 2 1>; test3-gpios = <&gpio_c 0 (GPIO_OUT|GPIO_OPEN_DRAIN)>, <&gpio_c 1 (GPIO_OUT|GPIO_OPEN_SOURCE)>, <&gpio_c 2 GPIO_OUT>, <&gpio_c 3 (GPIO_IN|GPIO_PULL_UP)>, <&gpio_c 4 (GPIO_IN|GPIO_PULL_DOWN)>, <&gpio_c 5 GPIO_IN>, <&gpio_c 6 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_DRAIN)>, <&gpio_c 7 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_SOURCE)>; test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>; test5-gpios = <&gpio_a 19>; bool-value; int8-value = /bits/ 8 <0x12>; int16-value = /bits/ 16 <0x1234>; int-value = <1234>; uint-value = <(-1234)>; int64-value = /bits/ 64 <0x1111222233334444>; int-array = <5678 9123 4567>; int64-array = /bits/ 64 <0x1111222233334444 0x4444333322221111>; str-value = "test string"; interrupts-extended = <&irq 3 0>; acpi,name = "GHIJ"; phandle-value = <&gpio_c 10>, <0xFFFFFFFF 20>, <&gpio_a 30>; mux-controls = <&muxcontroller0 0>, <&muxcontroller0 1>, <&muxcontroller0 2>, <&muxcontroller0 3>, <&muxcontroller1>; mux-control-names = "mux0", "mux1", "mux2", "mux3", "mux4"; mux-syscon = <&syscon3>; display-timings { timing0: 240x320 { clock-frequency = <6500000>; hactive = <240>; vactive = <320>; hfront-porch = <6>; hback-porch = <7>; hsync-len = <1>; vback-porch = <5>; vfront-porch = <8>; vsync-len = <2>; hsync-active = <1>; vsync-active = <0>; de-active = <1>; pixelclk-active = <1>; interlaced; doublescan; doubleclk; }; timing1: 480x800 { clock-frequency = <9000000>; hactive = <480>; vactive = <800>; hfront-porch = <10>; hback-porch = <59>; hsync-len = <12>; vback-porch = <15>; vfront-porch = <17>; vsync-len = <16>; hsync-active = <0>; vsync-active = <1>; de-active = <0>; pixelclk-active = <0>; }; timing2: 800x480 { clock-frequency = <33500000>; hactive = <800>; vactive = <480>; hback-porch = <89>; hfront-porch = <164>; vback-porch = <23>; vfront-porch = <10>; hsync-len = <11>; vsync-len = <13>; }; }; panel-timing { clock-frequency = <6500000>; hactive = <240>; vactive = <320>; hfront-porch = <6>; hback-porch = <7>; hsync-len = <1>; vback-porch = <5>; vfront-porch = <8>; vsync-len = <2>; hsync-active = <1>; vsync-active = <0>; de-active = <1>; pixelclk-active = <1>; interlaced; doublescan; doubleclk; }; }; junk { reg = <1 1>; compatible = "not,compatible"; }; no-compatible { reg = <2 1>; }; backlight: backlight { compatible = "pwm-backlight"; enable-gpios = <&gpio_a 1>; power-supply = <&ldo_1>; pwms = <&pwm 0 1000>; default-brightness-level = <5>; brightness-levels = <0 16 32 64 128 170 202 234 255>; }; bind-test { compatible = "simple-bus"; bind-test-child1 { compatible = "sandbox,phy"; #phy-cells = <1>; }; bind-test-child2 { compatible = "simple-bus"; }; }; b-test { reg = <3 1>; compatible = "denx,u-boot-fdt-test"; ping-expect = <3>; ping-add = <3>; mux-controls = <&muxcontroller0 0>; mux-control-names = "mux0"; }; phy_provider0: gen_phy@0 { compatible = "sandbox,phy"; #phy-cells = <1>; }; phy_provider1: gen_phy@1 { compatible = "sandbox,phy"; #phy-cells = <0>; broken; }; phy_provider2: gen_phy@2 { compatible = "sandbox,phy"; #phy-cells = <0>; }; phy_provider3: gen_phy@3 { compatible = "sandbox,phy"; #phy-cells = <2>; }; gen_phy_user: gen_phy_user { compatible = "simple-bus"; phys = <&phy_provider0 0>, <&phy_provider0 1>, <&phy_provider1>; phy-names = "phy1", "phy2", "phy3"; }; gen_phy_user1: gen_phy_user1 { compatible = "simple-bus"; phys = <&phy_provider0 0>, <&phy_provider2>; phy-names = "phy1", "phy2"; }; gen_phy_user2: gen_phy_user2 { compatible = "simple-bus"; phys = <&phy_provider3 0 0>; phy-names = "phy1"; }; some-bus { #address-cells = <1>; #size-cells = <0>; compatible = "denx,u-boot-test-bus"; reg = <3 1>; ping-expect = <4>; ping-add = <4>; c-test@5 { compatible = "denx,u-boot-fdt-test"; reg = <5>; ping-expect = <5>; ping-add = <5>; }; c-test@0 { compatible = "denx,u-boot-fdt-test"; reg = <0>; ping-expect = <6>; ping-add = <6>; }; c-test@1 { compatible = "denx,u-boot-fdt-test"; reg = <1>; ping-expect = <7>; ping-add = <7>; }; }; d-test { reg = <3 1>; ping-expect = <6>; ping-add = <6>; compatible = "google,another-fdt-test"; }; e-test { reg = <3 1>; ping-expect = <6>; ping-add = <6>; compatible = "google,another-fdt-test"; }; f-test { compatible = "denx,u-boot-fdt-test"; }; g-test { compatible = "denx,u-boot-fdt-test"; }; h-test { compatible = "denx,u-boot-fdt-test1"; }; i-test { compatible = "mediatek,u-boot-fdt-test"; #address-cells = <1>; #size-cells = <0>; subnode@0 { reg = <0>; }; subnode@1 { reg = <1>; }; subnode@2 { reg = <2>; }; }; devres-test { compatible = "denx,u-boot-devres-test"; }; another-test { reg = <0 2>; compatible = "denx,u-boot-fdt-test"; test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>; test5-gpios = <&gpio_a 19>; }; mmio-bus@0 { #address-cells = <1>; #size-cells = <1>; compatible = "denx,u-boot-test-bus"; dma-ranges = <0x10000000 0x00000000 0x00040000>; subnode@0 { compatible = "denx,u-boot-fdt-test"; }; }; mmio-bus@1 { #address-cells = <1>; #size-cells = <1>; compatible = "denx,u-boot-test-bus"; subnode@0 { compatible = "denx,u-boot-fdt-test"; }; }; acpi_test1: acpi-test { compatible = "denx,u-boot-acpi-test"; acpi-ssdt-test-data = "ab"; acpi-dsdt-test-data = "hi"; child { compatible = "denx,u-boot-acpi-test"; }; }; acpi_test2: acpi-test2 { compatible = "denx,u-boot-acpi-test"; acpi-ssdt-test-data = "cd"; acpi-dsdt-test-data = "jk"; }; clocks { clk_fixed: clk-fixed { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1234>; }; clk_fixed_factor: clk-fixed-factor { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <3>; clock-mult = <2>; clocks = <&clk_fixed>; }; osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <20000000>; }; }; clk_sandbox: clk-sbox { compatible = "sandbox,clk"; #clock-cells = <1>; assigned-clocks = <&clk_sandbox 3>; assigned-clock-rates = <321>; }; clk-test { compatible = "sandbox,clk-test"; clocks = <&clk_fixed>, <&clk_sandbox 1>, <&clk_sandbox 0>, <&clk_sandbox 3>, <&clk_sandbox 2>; clock-names = "fixed", "i2c", "spi", "uart2", "uart1"; }; clk-test2 { compatible = "sandbox,clk-test"; assigned-clock-rates = <321>; }; clk-test3 { compatible = "sandbox,clk-test"; assigned-clocks = <&clk_sandbox 1>; }; clk-test4 { compatible = "sandbox,clk-test"; assigned-clock-rates = <654>, <321>; assigned-clocks = <&clk_sandbox 1>; }; ccf: clk-ccf { compatible = "sandbox,clk-ccf"; }; efi-media { compatible = "sandbox,efi-media"; }; eth@10002000 { compatible = "sandbox,eth"; reg = <0x10002000 0x1000>; }; eth_5: eth@10003000 { compatible = "sandbox,eth"; reg = <0x10003000 0x1000>; nvmem-cells = <ð5_addr>; nvmem-cell-names = "mac-address"; }; eth_3: sbe5 { compatible = "sandbox,eth"; reg = <0x10005000 0x1000>; nvmem-cells = <ð3_addr>; nvmem-cell-names = "mac-address"; }; eth@10004000 { compatible = "sandbox,eth"; reg = <0x10004000 0x1000>; }; phy_eth0: phy-test-eth { compatible = "sandbox,eth"; reg = <0x10007000 0x1000>; mac-address = [ 02 00 11 22 33 49 ]; phy-handle = <ðphy1>; phy-mode = "2500base-x"; }; dsa_eth0: dsa-test-eth { compatible = "sandbox,eth"; reg = <0x10006000 0x1000>; nvmem-cells = <ð4_addr>; nvmem-cell-names = "mac-address"; }; dsa-test { compatible = "sandbox,dsa"; ports { #address-cells = <1>; #size-cells = <0>; swp_0: port@0 { reg = <0>; label = "lan0"; phy-mode = "rgmii-rxid"; fixed-link { speed = <100>; full-duplex; }; }; swp_1: port@1 { reg = <1>; label = "lan1"; phy-mode = "rgmii-txid"; fixed-link = <0 1 100 0 0>; }; port@2 { reg = <2>; ethernet = <&dsa_eth0>; fixed-link { speed = <1000>; full-duplex; }; }; }; }; firmware { sandbox_firmware: sandbox-firmware { compatible = "sandbox,firmware"; }; scmi { compatible = "sandbox,scmi-agent"; #address-cells = <1>; #size-cells = <0>; clk_scmi: protocol@14 { reg = <0x14>; #clock-cells = <1>; linaro,sandbox-channel-id = <0x14>; }; reset_scmi: protocol@16 { reg = <0x16>; #reset-cells = <1>; }; protocol@17 { reg = <0x17>; regulators { #address-cells = <1>; #size-cells = <0>; regul0_scmi: reg@0 { reg = <0>; regulator-name = "sandbox-voltd0"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; regul1_scmi: reg@1 { reg = <0x1>; regulator-name = "sandbox-voltd1"; regulator-min-microvolt = <1800000>; }; }; }; }; }; fpga { compatible = "sandbox,fpga"; }; pinctrl-gpio { compatible = "sandbox,pinctrl-gpio"; gpio_a: base-gpios { compatible = "sandbox,gpio"; gpio-controller; #gpio-cells = <1>; gpio-bank-name = "a"; sandbox,gpio-count = <20>; hog_input_active_low { gpio-hog; input; gpios = <10 GPIO_ACTIVE_LOW>; }; hog_input_active_high { gpio-hog; input; gpios = <11 GPIO_ACTIVE_HIGH>; }; hog_output_low { gpio-hog; output-low; gpios = <12 GPIO_ACTIVE_HIGH>; }; hog_output_high { gpio-hog; output-high; gpios = <13 GPIO_ACTIVE_HIGH>; }; }; gpio_b: extra-gpios { compatible = "sandbox,gpio"; gpio-controller; #gpio-cells = <5>; gpio-bank-name = "b"; sandbox,gpio-count = <10>; }; gpio_c: pinmux-gpios { compatible = "sandbox,gpio"; gpio-controller; #gpio-cells = <2>; gpio-bank-name = "c"; sandbox,gpio-count = <10>; }; }; i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0 1>; compatible = "sandbox,i2c"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinmux_i2c0_pins>; eeprom@2c { #address-cells = <1>; #size-cells = <1>; reg = <0x2c>; compatible = "i2c-eeprom"; sandbox,emul = <&emul_eeprom>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; bootcount_i2c: bootcount@10 { reg = <10 2>; }; }; eth3_addr: mac-address@24 { reg = <24 6>; }; }; rtc_0: rtc@43 { #address-cells = <1>; #size-cells = <1>; reg = <0x43>; compatible = "sandbox-rtc"; sandbox,emul = <&emul0>; eth4_addr: mac-address@40 { reg = <0x40 6>; }; }; rtc_1: rtc@61 { reg = <0x61>; compatible = "sandbox-rtc"; sandbox,emul = <&emul1>; }; i2c_emul: emul { reg = <0xff>; compatible = "sandbox,i2c-emul-parent"; emul_eeprom: emul-eeprom { compatible = "sandbox,i2c-eeprom"; sandbox,filename = "i2c.bin"; sandbox,size = <256>; }; emul0: emul0 { compatible = "sandbox,i2c-rtc-emul"; }; emul1: emull { compatible = "sandbox,i2c-rtc-emul"; }; }; sandbox_pmic: sandbox_pmic { reg = <0x40>; sandbox,emul = <&emul_pmic0>; }; mc34708: pmic@41 { reg = <0x41>; sandbox,emul = <&emul_pmic1>; }; }; bootcount@0 { compatible = "u-boot,bootcount-rtc"; rtc = <&rtc_1>; offset = <0x13>; }; bootcount { compatible = "u-boot,bootcount-i2c-eeprom"; i2c-eeprom = <&bootcount_i2c>; }; bootcount_4@0 { compatible = "u-boot,bootcount-syscon"; syscon = <&syscon0>; reg = <0x0 0x04>, <0x0 0x04>; reg-names = "syscon_reg", "offset"; }; bootcount_2@0 { compatible = "u-boot,bootcount-syscon"; syscon = <&syscon0>; reg = <0x0 0x04>, <0x0 0x02> ; reg-names = "syscon_reg", "offset"; }; adc: adc@0 { compatible = "sandbox,adc"; #io-channel-cells = <1>; vdd-supply = <&buck2>; vss-microvolts = <0>; }; iommu: iommu@0 { compatible = "sandbox,iommu"; #iommu-cells = <0>; }; irq: irq { compatible = "sandbox,irq"; interrupt-controller; #interrupt-cells = <2>; }; lcd { bootph-all; compatible = "sandbox,lcd-sdl"; pinctrl-names = "default"; pinctrl-0 = <&pinmux_lcd_pins>; xres = <1366>; yres = <768>; }; leds { compatible = "gpio-leds"; iracibble { gpios = <&gpio_a 1 0>; label = "sandbox:red"; }; martinet { gpios = <&gpio_a 2 0>; label = "sandbox:green"; }; default_on { gpios = <&gpio_a 5 0>; label = "sandbox:default_on"; default-state = "on"; }; default_off { gpios = <&gpio_a 6 0>; /* label intentionally omitted */ default-state = "off"; }; }; wdt-gpio-toggle { gpios = <&gpio_a 7 0>; compatible = "linux,wdt-gpio"; hw_margin_ms = <100>; hw_algo = "toggle"; always-running; }; wdt-gpio-level { gpios = <&gpio_a 7 0>; compatible = "linux,wdt-gpio"; hw_margin_ms = <100>; hw_algo = "level"; always-running; }; mbox: mbox { compatible = "sandbox,mbox"; #mbox-cells = <1>; }; mbox-test { compatible = "sandbox,mbox-test"; mboxes = <&mbox 100>, <&mbox 1>; mbox-names = "other", "test"; }; cpus { #address-cells = <1>; #size-cells = <0>; timebase-frequency = <2000000>; cpu1: cpu@1 { device_type = "cpu"; reg = <0x1>; timebase-frequency = <3000000>; compatible = "sandbox,cpu_sandbox"; bootph-all; }; cpu2: cpu@2 { device_type = "cpu"; reg = <0x2>; compatible = "sandbox,cpu_sandbox"; bootph-all; }; cpu3: cpu@3 { device_type = "cpu"; reg = <0x3>; compatible = "sandbox,cpu_sandbox"; bootph-all; }; }; chipid: chipid { compatible = "sandbox,soc"; }; i2s: i2s { compatible = "sandbox,i2s"; #sound-dai-cells = <1>; sandbox,silent; /* Don't emit sounds while testing */ }; nop-test_0 { compatible = "sandbox,nop_sandbox1"; nop-test_1 { compatible = "sandbox,nop_sandbox2"; bind = "True"; }; nop-test_2 { compatible = "sandbox,nop_sandbox2"; bind = "False"; }; }; memory-controller { compatible = "sandbox,memory"; }; misc-test { #address-cells = <1>; #size-cells = <1>; compatible = "sandbox,misc_sandbox"; eth5_addr: mac-address@10 { reg = <0x10 6>; }; }; mmc2 { compatible = "sandbox,mmc"; non-removable; }; /* This is used for the bootdev tests */ mmc1 { compatible = "sandbox,mmc"; filename = "mmc1.img"; }; /* This is used for the fastboot tests */ mmc0: mmc0 { compatible = "sandbox,mmc"; }; /* This is used for VBE VPL tests */ mmc3 { status = "disabled"; compatible = "sandbox,mmc"; filename = "image.bin"; non-removable; }; /* This is used for bootstd bootmenu tests */ mmc4 { status = "disabled"; compatible = "sandbox,mmc"; filename = "mmc4.img"; }; /* This is used for ChromiumOS tests */ mmc5 { status = "disabled"; compatible = "sandbox,mmc"; filename = "mmc5.img"; }; pch { compatible = "sandbox,pch"; }; pci0: pci@0 { compatible = "sandbox,pci"; device_type = "pci"; bus-range = <0x00 0xff>; #address-cells = <3>; #size-cells = <2>; ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000000 0x01000000 0 0x20000000 0x20000000 0 0x2000>; iommu-map = <0x0010 &iommu 0 1>; iommu-map-mask = <0xfffffff8>; pci@0,0 { compatible = "pci-generic"; reg = <0x0000 0 0 0 0>; sandbox,emul = <&swap_case_emul0_0>; }; pci@1,0 { compatible = "pci-generic"; /* reg 0 is at 0x14, using FDT_PCI_SPACE_MEM32 */ reg = <0x02000814 0 0 0x80 0 0x01000810 0 0 0xc0 0>; sandbox,emul = <&swap_case_emul0_1>; }; p2sb-pci@2,0 { compatible = "sandbox,p2sb"; reg = <0x02001010 0 0 0 0>; sandbox,emul = <&p2sb_emul>; adder { intel,p2sb-port-id = <3>; compatible = "sandbox,adder"; }; }; pci@1e,0 { compatible = "sandbox,pmc"; reg = <0xf000 0 0 0 0>; sandbox,emul = <&pmc_emul1e>; acpi-base = <0x400>; gpe0-dwx-mask = <0xf>; gpe0-dwx-shift-base = <4>; gpe0-dw = <6 7 9>; gpe0-sts = <0x20>; gpe0-en = <0x30>; }; pci@1f,0 { compatible = "pci-generic"; /* reg 0 is at 0x10, using FDT_PCI_SPACE_IO */ reg = <0x0100f810 0 0 0x100 0>; sandbox,emul = <&swap_case_emul0_1f>; }; }; pci-emul0 { compatible = "sandbox,pci-emul-parent"; swap_case_emul0_0: emul0@0,0 { compatible = "sandbox,swap-case"; }; swap_case_emul0_1: emul0@1,0 { compatible = "sandbox,swap-case"; use-ea; }; swap_case_emul0_1f: emul0@1f,0 { compatible = "sandbox,swap-case"; }; p2sb_emul: emul@2,0 { compatible = "sandbox,p2sb-emul"; }; pmc_emul1e: emul@1e,0 { compatible = "sandbox,pmc-emul"; }; }; pci1: pci@1 { compatible = "sandbox,pci"; device_type = "pci"; bus-range = <0x00 0xff>; #address-cells = <3>; #size-cells = <2>; ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000 // MEM0 0x02000000 0 0x31000000 0x3e000000 0 0x2000 // MEM1 0x01000000 0 0x40000000 0x40000000 0 0x2000>; sandbox,dev-info = <0x08 0x00 0x1234 0x5678 0x0c 0x00 0x1234 0x5678 0x10 0x00 0x1234 0x5678>; pci@10,0 { reg = <0x8000 0 0 0 0>; }; }; pci2: pci@2 { compatible = "sandbox,pci"; device_type = "pci"; bus-range = <0x00 0xff>; #address-cells = <3>; #size-cells = <2>; ranges = <0x02000000 0 0x50000000 0x50000000 0 0x2000 0x01000000 0 0x60000000 0x60000000 0 0x2000>; sandbox,dev-info = <0x08 0x00 0x1234 0x5678>; pci@1f,0 { compatible = "pci-generic"; reg = <0xf800 0 0 0 0>; sandbox,emul = <&swap_case_emul2_1f>; }; }; pci-emul2 { compatible = "sandbox,pci-emul-parent"; swap_case_emul2_1f: emul2@1f,0 { compatible = "sandbox,swap-case"; }; }; pci_ep: pci_ep { compatible = "sandbox,pci_ep"; }; probing { compatible = "simple-bus"; test1 { compatible = "denx,u-boot-probe-test"; }; test2 { compatible = "denx,u-boot-probe-test"; }; test3 { compatible = "denx,u-boot-probe-test"; }; test4 { compatible = "denx,u-boot-probe-test"; first-syscon = <&syscon0>; second-sys-ctrl = <&another_system_controller>; third-syscon = <&syscon2>; }; }; pwrdom: power-domain { compatible = "sandbox,power-domain"; #power-domain-cells = <1>; }; power-domain-test { compatible = "sandbox,power-domain-test"; power-domains = <&pwrdom 2>; }; pwm: pwm { compatible = "sandbox,pwm"; #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinmux_pwm_pins>; }; pwm2 { compatible = "sandbox,pwm"; #pwm-cells = <2>; }; ram { compatible = "sandbox,ram"; }; reset@0 { compatible = "sandbox,warm-reset"; bootph-some-ram; }; reset@1 { compatible = "sandbox,reset"; bootph-some-ram; }; resetc: reset-ctl { compatible = "sandbox,reset-ctl"; #reset-cells = <1>; }; reset-ctl-test { compatible = "sandbox,reset-ctl-test"; resets = <&resetc 100>, <&resetc 2>, <&resetc 20>, <&resetc 40>; reset-names = "other", "test", "test2", "test3"; }; rng { compatible = "sandbox,sandbox-rng"; }; rproc_1: rproc@1 { compatible = "sandbox,test-processor"; remoteproc-name = "remoteproc-test-dev1"; }; rproc_2: rproc@2 { compatible = "sandbox,test-processor"; internal-memory-mapped; remoteproc-name = "remoteproc-test-dev2"; }; panel { compatible = "simple-panel"; backlight = <&backlight 0 100>; }; scsi { compatible = "sandbox,scsi"; sandbox,filepath = "scsi.img"; }; smem@0 { compatible = "sandbox,smem"; }; sound { compatible = "sandbox,sound"; cpu { sound-dai = <&i2s 0>; }; codec { sound-dai = <&audio 0>; }; }; spi@0 { #address-cells = <1>; #size-cells = <0>; reg = <0 1>; compatible = "sandbox,spi"; cs-gpios = <0>, <0>, <&gpio_a 0>; pinctrl-names = "default"; pinctrl-0 = <&pinmux_spi0_pins>; spi.bin@0 { reg = <0>; compatible = "spansion,m25p16", "jedec,spi-nor"; spi-max-frequency = <40000000>; sandbox,filename = "spi.bin"; }; spi.bin@1 { reg = <1>; compatible = "spansion,m25p16", "jedec,spi-nor"; spi-max-frequency = <50000000>; sandbox,filename = "spi.bin"; spi-cpol; spi-cpha; }; }; syscon0: syscon@0 { compatible = "sandbox,syscon0"; reg = <0x10 16>; }; another_system_controller: syscon@1 { compatible = "sandbox,syscon1"; reg = <0x20 5 0x28 6 0x30 7 0x38 8>; }; syscon2: syscon@2 { compatible = "simple-mfd", "syscon"; reg = <0x40 5 0x48 6 0x50 7 0x58 8>; }; syscon3: syscon@3 { compatible = "simple-mfd", "syscon"; reg = <0x000100 0x10>; muxcontroller0: a-mux-controller { compatible = "mmio-mux"; #mux-control-cells = <1>; mux-reg-masks = <0x0 0x30>, /* 0: reg 0x0, bits 5:4 */ <0xc 0x1E>, /* 1: reg 0xc, bits 4:1 */ <0x4 0xFF>; /* 2: reg 0x4, bits 7:0 */ idle-states = , <0x02>, <0x73>; u-boot,mux-autoprobe; }; }; muxcontroller1: emul-mux-controller { compatible = "mux-emul"; #mux-control-cells = <0>; u-boot,mux-autoprobe; idle-state = <0xabcd>; }; testfdtm0 { compatible = "denx,u-boot-fdtm-test"; }; testfdtm1: testfdtm1 { compatible = "denx,u-boot-fdtm-test"; }; testfdtm2 { compatible = "denx,u-boot-fdtm-test"; }; timer@0 { compatible = "sandbox,timer"; clock-frequency = <1000000>; }; timer@1 { compatible = "sandbox,timer"; sandbox,timebase-frequency-fallback; }; tpm2 { compatible = "sandbox,tpm2"; }; tpm { compatible = "google,sandbox-tpm"; }; uart0: serial { compatible = "sandbox,serial"; bootph-all; pinctrl-names = "default"; pinctrl-0 = <&pinmux_uart0_pins>; }; usb_0: usb@0 { compatible = "sandbox,usb"; status = "disabled"; hub { compatible = "sandbox,usb-hub"; #address-cells = <1>; #size-cells = <0>; flash-stick { reg = <0>; compatible = "sandbox,usb-flash"; }; }; }; usb_1: usb@1 { compatible = "sandbox,usb"; iommus = <&iommu>; hub { compatible = "usb-hub"; usb,device-class = <9>; #address-cells = <1>; #size-cells = <0>; hub-emul { compatible = "sandbox,usb-hub"; #address-cells = <1>; #size-cells = <0>; flash-stick@0 { reg = <0>; compatible = "sandbox,usb-flash"; sandbox,filepath = "testflash.bin"; }; flash-stick@1 { reg = <1>; compatible = "sandbox,usb-flash"; sandbox,filepath = "testflash1.bin"; }; flash-stick@2 { reg = <2>; compatible = "sandbox,usb-flash"; sandbox,filepath = "testflash2.bin"; }; keyb@3 { reg = <3>; compatible = "sandbox,usb-keyb"; }; }; usbstor@1 { reg = <1>; }; usbstor@3 { reg = <3>; }; }; }; usb_2: usb@2 { compatible = "sandbox,usb"; status = "disabled"; }; spmi: spmi@0 { compatible = "sandbox,spmi"; #address-cells = <0x1>; #size-cells = <0x1>; ranges; pm8916@0 { compatible = "qcom,spmi-pmic"; reg = <0x0 0x1>; #address-cells = <0x1>; #size-cells = <0x1>; ranges; spmi_gpios: gpios@c000 { compatible = "qcom,pm8916-gpio"; reg = <0xc000 0x400>; gpio-controller; gpio-count = <4>; #gpio-cells = <2>; gpio-bank-name="spmi"; }; }; }; wdt0: wdt@0 { compatible = "sandbox,wdt"; hw_margin_ms = <200>; }; axi: axi@0 { compatible = "sandbox,axi"; #address-cells = <0x1>; #size-cells = <0x1>; store@0 { compatible = "sandbox,sandbox_store"; reg = <0x0 0x400>; }; }; chosen { #address-cells = <1>; #size-cells = <1>; setting = "sunrise ohoka"; other-node = "/some-bus/c-test@5"; int-values = <0x1937 72993>; u-boot,acpi-ssdt-order = <&acpi_test2 &acpi_test1>; chosen-test { compatible = "denx,u-boot-fdt-test"; reg = <9 1>; }; }; translation-test@8000 { compatible = "simple-bus"; reg = <0x8000 0x4000>; #address-cells = <0x2>; #size-cells = <0x1>; ranges = <0 0x0 0x8000 0x1000 1 0x100 0x9000 0x1000 2 0x200 0xA000 0x1000 3 0x300 0xB000 0x1000 >; dma-ranges = <0 0x000 0x10000000 0x1000 1 0x100 0x20000000 0x1000 >; dev@0,0 { compatible = "denx,u-boot-fdt-dummy"; reg = <0 0x0 0x1000>; reg-names = "sandbox-dummy-0"; }; dev@1,100 { compatible = "denx,u-boot-fdt-dummy"; reg = <1 0x100 0x1000>; }; dev@2,200 { compatible = "denx,u-boot-fdt-dummy"; reg = <2 0x200 0x1000>; }; noxlatebus@3,300 { compatible = "simple-bus"; reg = <3 0x300 0x1000>; #address-cells = <0x1>; #size-cells = <0x0>; dev@42 { compatible = "denx,u-boot-fdt-dummy"; reg = <0x42>; }; }; }; ofnode-foreach { compatible = "foreach"; first { prop1 = <1>; prop2 = <2>; }; second { prop1 = <1>; prop2 = <2>; }; }; osd { compatible = "sandbox,sandbox_osd"; }; sandbox_tee { compatible = "sandbox,tee"; }; sandbox_virtio1 { compatible = "sandbox,virtio1"; virtio-type = <4>; /* rng */ }; sandbox_virtio2 { compatible = "sandbox,virtio2"; }; sandbox-virtio-blk { compatible = "sandbox,virtio1"; virtio-type = <2>; /* block */ }; sandbox_scmi { compatible = "sandbox,scmi-devices"; clocks = <&clk_scmi 2>, <&clk_scmi 0>; resets = <&reset_scmi 3>; regul0-supply = <®ul0_scmi>; regul1-supply = <®ul1_scmi>; }; pinctrl { compatible = "sandbox,pinctrl"; pinctrl-names = "default", "alternate"; pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_i2s>; pinctrl-1 = <&pinctrl_spi>, <&pinctrl_i2c>; pinctrl_gpios: gpios { gpio0 { pins = "P5"; function = "GPIO"; bias-pull-up; input-disable; }; gpio1 { pins = "P6"; function = "GPIO"; output-high; drive-open-drain; }; gpio2 { pinmux = ; bias-pull-down; input-enable; }; gpio3 { pinmux = ; bias-disable; }; }; pinctrl_i2c: i2c { groups { groups = "I2C_UART"; function = "I2C"; }; pins { pins = "P0", "P1"; drive-open-drain; }; }; pinctrl_i2s: i2s { groups = "SPI_I2S"; function = "I2S"; }; pinctrl_spi: spi { groups = "SPI_I2S"; function = "SPI"; cs { pinmux = , ; }; }; }; pinctrl-single-no-width { compatible = "pinctrl-single"; reg = <0x0000 0x238>; #pinctrl-cells = <1>; pinctrl-single,function-mask = <0x7f>; }; pinctrl-single-pins { compatible = "pinctrl-single"; reg = <0x0000 0x238>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; pinmux_pwm_pins: pinmux_pwm_pins { pinctrl-single,pins = < 0x48 0x06 >; }; pinmux_spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < 0x190 0x0c 0x194 0x0c 0x198 0x23 0x19c 0x0c >; }; pinmux_uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < 0x70 0x30 0x74 0x00 >; }; }; pinctrl-single-bits { compatible = "pinctrl-single"; reg = <0x0000 0x50>; #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; pinmux_i2c0_pins: pinmux_i2c0_pins { pinctrl-single,bits = < 0x10 0x00002200 0x0000ff00 >; }; pinmux_lcd_pins: pinmux_lcd_pins { pinctrl-single,bits = < 0x40 0x22222200 0xffffff00 0x44 0x22222222 0xffffffff 0x48 0x00000022 0x000000ff 0x48 0x02000000 0x0f000000 0x4c 0x02000022 0x0f0000ff >; }; }; hwspinlock@0 { compatible = "sandbox,hwspinlock"; }; dma: dma { compatible = "sandbox,dma"; #dma-cells = <1>; dmas = <&dma 0>, <&dma 1>, <&dma 2>; dma-names = "m2m", "tx0", "rx0"; }; /* * keep mdio-mux ahead of mdio so that the mux is removed first at the * end of the test. If parent mdio is removed first, clean-up of the * mux will trigger a 2nd probe of parent-mdio, leaving parent-mdio * active at the end of the test. That it turn doesn't allow the mdio * class to be destroyed, triggering an error. */ mdio-mux-test { compatible = "sandbox,mdio-mux"; #address-cells = <1>; #size-cells = <0>; mdio-parent-bus = <&mdio>; mdio-ch-test@0 { reg = <0>; }; mdio-ch-test@1 { reg = <1>; }; }; mdio: mdio-test { compatible = "sandbox,mdio"; #address-cells = <1>; #size-cells = <0>; ethphy1: ethernet-phy@1 { reg = <1>; }; }; pm-bus-test { compatible = "simple-pm-bus"; clocks = <&clk_sandbox 4>; power-domains = <&pwrdom 1>; }; resetc2: syscon-reset { compatible = "syscon-reset"; #reset-cells = <1>; regmap = <&syscon0>; offset = <1>; mask = <0x27FFFFFF>; assert-high = <0>; }; syscon-reset-test { compatible = "sandbox,misc_sandbox"; resets = <&resetc2 15>, <&resetc2 30>, <&resetc2 60>; reset-names = "valid", "no_mask", "out_of_range"; }; sysinfo { compatible = "sandbox,sysinfo-sandbox"; }; sysinfo-gpio { compatible = "gpio-sysinfo"; gpios = <&gpio_a 15>, <&gpio_a 16>, <&gpio_a 17>; revisions = <19>, <5>; names = "rev_a", "foo"; }; some_regmapped-bus { #address-cells = <0x1>; #size-cells = <0x1>; ranges = <0x0 0x0 0x10>; compatible = "simple-bus"; regmap-test_0 { reg = <0 0x10>; compatible = "sandbox,regmap_test"; }; }; thermal { compatible = "sandbox,thermal"; }; fwu-mdata { compatible = "u-boot,fwu-mdata-gpt"; fwu-mdata-store = <&mmc0>; }; nvmxip-qspi1@08000000 { compatible = "nvmxip,qspi"; reg = <0x08000000 0x00200000>; lba_shift = <9>; lba = <4096>; }; nvmxip-qspi2@08200000 { compatible = "nvmxip,qspi"; reg = <0x08200000 0x00100000>; lba_shift = <9>; lba = <2048>; }; extcon { compatible = "sandbox,extcon"; }; arm-ffa-emul { compatible = "sandbox,arm-ffa-emul"; sandbox-arm-ffa { compatible = "sandbox,arm-ffa"; }; }; }; #include "sandbox_pmic.dtsi" #include "cros-ec-keyboard.dtsi" #ifdef CONFIG_SANDBOX_VPL #include "sandbox_vpl.dtsi" #endif #include "cedit.dtsi"