if ARCH_MVEBU config HAVE_MVEBU_EFUSE bool config ARMADA_32BIT bool select ARCH_MISC_INIT select BOARD_EARLY_INIT_F select CPU_V7A select SPL_DM if SPL select SPL_DM_SEQ_ALIAS if SPL select SPL_OF_CONTROL if SPL select SPL_SKIP_LOWLEVEL_INIT if SPL select SPL_SIMPLE_BUS if SPL select SUPPORT_SPL select TRANSLATION_OFFSET config ARMADA_64BIT bool select ARM64 # ARMv7 SoCs... config ARMADA_375 bool select ARMADA_32BIT config ARMADA_38X bool select ARMADA_32BIT select HAVE_MVEBU_EFUSE config ARMADA_38X_HS_IMPEDANCE_THRESH hex "Armada 38x USB 2.0 High-Speed Impedance Threshold (0x0 - 0x7)" depends on ARMADA_38X default 0x6 range 0x0 0x7 config ARMADA_XP bool select ARMADA_32BIT # ARMv8 SoCs... config ARMADA_3700 bool select ARM64 select HAVE_MVEBU_EFUSE # Armada 7K and 8K are very similar - use only one Kconfig symbol for both config ARMADA_8K bool select ARM64 # Armada PLL frequency (used for NAND clock generation) config SYS_MVEBU_PLL_CLOCK int default "2000000000" if ARMADA_XP || ARMADA_3700 || ARMADA_8K || ARMADA_MSYS default "1000000000" if ARMADA_38X || ARMADA_375 # Armada XP/38x SoC types... config MV78230 bool select ARMADA_XP config MV78260 bool select ARMADA_XP imply CMD_SATA config MV78460 bool select ARMADA_XP config ARMADA_MSYS bool select ARMADA_32BIT config 98DX4251 bool select ARMADA_MSYS config 98DX3336 bool select ARMADA_MSYS config 98DX3236 bool select ARMADA_MSYS config 88F6820 bool select ARMADA_38X config CUSTOMER_BOARD_SUPPORT bool choice prompt "Armada XP/375/38x/3700/7K/8K board select" optional config TARGET_CLEARFOG bool "Support ClearFog" select 88F6820 select BOARD_LATE_INIT config TARGET_HELIOS4 bool "Support Helios4" select 88F6820 config TARGET_MVEBU_ARMADA_37XX bool "Support Armada 37xx platforms" select ARMADA_3700 imply SCSI config TARGET_DB_88F6720 bool "Support DB-88F6720 Armada 375" select ARMADA_375 config TARGET_DB_88F6820_GP bool "Support DB-88F6820-GP" select 88F6820 config TARGET_DB_88F6820_AMC bool "Support DB-88F6820-AMC" select 88F6820 config TARGET_TURRIS_OMNIA bool "Support Turris Omnia" select 88F6820 select BOARD_LATE_INIT select DM_I2C select I2C_MUX select I2C_MUX_PCA954x select SPL_DRIVERS_MISC select SPL_I2C_MUX select SPL_SYS_MALLOC_SIMPLE select SYS_I2C_MVTWSI select ATSHA204A config TARGET_TURRIS_MOX bool "Support Turris Mox" select ARMADA_3700 config TARGET_MVEBU_ARMADA_8K bool "Support Armada 7k/8k platforms" select ARMADA_8K select BOARD_LATE_INIT imply SCSI config TARGET_OCTEONTX2_CN913x bool "Support CN913x platforms" select ARMADA_8K imply BOARD_EARLY_INIT_R select BOARD_LATE_INIT imply SCSI config TARGET_DB_MV784MP_GP bool "Support db-mv784mp-gp" select BOARD_ECC_SUPPORT select MV78460 config TARGET_DS414 bool "Support Synology DS414" select MV78230 config TARGET_MAXBCM bool "Support maxbcm" select BOARD_ECC_SUPPORT select MV78460 config TARGET_THEADORABLE bool "Support theadorable Armada XP" select BOARD_LATE_INIT if USB select MV78260 imply CMD_SATA config TARGET_CONTROLCENTERDC bool "Support CONTROLCENTERDC" select 88F6820 select CUSTOMER_BOARD_SUPPORT config TARGET_X530 bool "Support Allied Telesis x530" select 88F6820 config TARGET_DB_XC3_24G4XG bool "Support DB-XC3-24G4XG" select 98DX3336 config TARGET_CRS3XX_98DX3236 bool "Support CRS3XX-98DX3236" select 98DX3236 endchoice choice prompt "DDR bus width" default DDR_64BIT depends on ARMADA_XP config DDR_64BIT bool "64bit bus width" config DDR_32BIT bool "32bit bus width" endchoice config DDR_LOG_LEVEL int "DDR training code log level" depends on ARMADA_XP default 0 range 0 3 help Amount of information provided on error while running the DDR training code. At level 0, provides an error code in a case of failure, RL, WL errors and other algorithm failure. At level 1, provides the D-Unit setup (SPD/Static configuration). At level 2, provides the windows margin as a results of DQS centeralization. At level 3, rovides the windows margin of each DQ as a results of DQS centeralization. config DDR_RESET_ON_TRAINING_FAILURE bool "Reset the board on DDR training failure instead of hanging" depends on ARMADA_38X || ARMADA_XP help If DDR training fails in SPL, reset the board instead of hanging. Some boards are known to fail DDR training occasionally and an immediate reset may be preferable to waiting until the board is reset by watchdog (if there even is one). Note that if booting via UART and the DDR training fails, the device will still hang - it doesn't make sense to reset the board in such a case. config BOARD_ECC_SUPPORT bool config SYS_BOARD default "clearfog" if TARGET_CLEARFOG default "helios4" if TARGET_HELIOS4 default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX default "db-88f6720" if TARGET_DB_88F6720 default "db-88f6820-gp" if TARGET_DB_88F6820_GP default "db-88f6820-amc" if TARGET_DB_88F6820_AMC default "turris_omnia" if TARGET_TURRIS_OMNIA default "turris_mox" if TARGET_TURRIS_MOX default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K default "octeontx2_cn913x" if TARGET_OCTEONTX2_CN913x default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM default "theadorable" if TARGET_THEADORABLE default "a38x" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG default "helios4" if TARGET_HELIOS4 default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX default "db-88f6720" if TARGET_DB_88F6720 default "db-88f6820-gp" if TARGET_DB_88F6820_GP default "db-88f6820-amc" if TARGET_DB_88F6820_AMC default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K default "mvebu_armada-8k" if TARGET_OCTEONTX2_CN913x default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM default "theadorable" if TARGET_THEADORABLE default "turris_omnia" if TARGET_TURRIS_OMNIA default "turris_mox" if TARGET_TURRIS_MOX default "controlcenterdc" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP default "Marvell" if TARGET_MVEBU_ARMADA_37XX default "Marvell" if TARGET_DB_88F6720 default "Marvell" if TARGET_DB_88F6820_GP default "Marvell" if TARGET_DB_88F6820_AMC default "Marvell" if TARGET_MVEBU_ARMADA_8K default "Marvell" if TARGET_OCTEONTX2_CN913x default "Marvell" if TARGET_DB_XC3_24G4XG default "Marvell" if TARGET_MVEBU_DB_88F7040 default "solidrun" if TARGET_CLEARFOG default "kobol" if TARGET_HELIOS4 default "Synology" if TARGET_DS414 default "CZ.NIC" if TARGET_TURRIS_OMNIA default "CZ.NIC" if TARGET_TURRIS_MOX default "gdsys" if TARGET_CONTROLCENTERDC default "alliedtelesis" if TARGET_X530 default "mikrotik" if TARGET_CRS3XX_98DX3236 config SYS_SOC default "mvebu" choice prompt "Boot method" depends on SPL config MVEBU_SPL_BOOT_DEVICE_SPI bool "SPI NOR flash" imply ENV_IS_IN_SPI_FLASH imply SPL_DM_SPI imply SPL_SPI_FLASH_SUPPORT imply SPL_SPI_LOAD imply SPL_SPI select SPL_BOOTROM_SUPPORT config MVEBU_SPL_BOOT_DEVICE_MMC bool "SDIO/MMC card" imply ENV_IS_IN_MMC # GPIO needed for eMMC/SD card presence detection imply SPL_DM_GPIO imply SPL_DM_MMC imply SPL_GPIO imply SPL_LIBDISK_SUPPORT imply SPL_MMC select SPL_BOOTROM_SUPPORT config MVEBU_SPL_BOOT_DEVICE_SATA bool "SATA" imply SPL_SATA imply SPL_LIBDISK_SUPPORT select SPL_BOOTROM_SUPPORT config MVEBU_SPL_BOOT_DEVICE_UART bool "UART" select SPL_BOOTROM_SUPPORT endchoice config MVEBU_EFUSE bool "Enable eFuse support" depends on HAVE_MVEBU_EFUSE help Enable support for reading and writing eFuses on mvebu SoCs. config MVEBU_EFUSE_FAKE bool "Fake eFuse access (dry run)" depends on MVEBU_EFUSE help This enables a "dry run" mode where eFuses are not really programmed. Instead the eFuse accesses are emulated by writing to and reading from a memory block. This is can be used for testing prog scripts. config SECURED_MODE_IMAGE bool "Build image for trusted boot" default false depends on 88F6820 help Build an image that employs the ARMADA SoC's trusted boot framework for securely booting images. config SECURED_MODE_CSK_INDEX int "Index of active CSK" default 0 depends on SECURED_MODE_IMAGE source "board/solidrun/clearfog/Kconfig" source "board/kobol/helios4/Kconfig" endif