// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2020 Toradex */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; #define I2C_PMIC_BUS_ID 1 int spl_board_boot_device(enum boot_device boot_dev_spl) { switch (boot_dev_spl) { case MMC1_BOOT: return BOOT_DEVICE_MMC1; case SD2_BOOT: case MMC2_BOOT: return BOOT_DEVICE_MMC2; case SD3_BOOT: case MMC3_BOOT: return BOOT_DEVICE_MMC1; case USB_BOOT: return BOOT_DEVICE_BOARD; default: return BOOT_DEVICE_NONE; } } void spl_dram_init(void) { ddr_init(&dram_timing); } void spl_board_init(void) { /* Serial download mode */ if (is_usb_boot()) { puts("Back to ROM, SDP\n"); restore_boot_params(); } puts("Normal Boot\n"); } #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { /* Just empty function now - can't decide what to choose */ debug("%s: %s\n", __func__, name); return 0; } #endif __weak void board_early_init(void) { init_uart_clk(0); } int power_init_board(void) { struct udevice *dev; int ret; if (IS_ENABLED(CONFIG_SPL_DM_PMIC_PCA9450)) { ret = pmic_get("pmic", &dev); if (ret == -ENODEV) { puts("No pmic found\n"); return ret; } if (ret != 0) return ret; /* BUCKxOUT_DVS0/1 control BUCK123 output, clear PRESET_EN */ pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29); /* increase VDD_DRAM to 0.975v for 1.5Ghz DDR */ pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x1c); /* set WDOG_B_CFG to cold reset */ pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1); pmic_reg_write(dev, PCA9450_CONFIG2, 0x1); return 0; } return 0; } void board_init_f(ulong dummy) { struct udevice *dev; int ret; arch_cpu_init(); board_early_init(); timer_init(); /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); ret = spl_early_init(); if (ret) { debug("spl_early_init() failed: %d\n", ret); hang(); } ret = uclass_get_device_by_name(UCLASS_CLK, "clock-controller@30380000", &dev); if (ret < 0) { printf("Failed to find clock node. Check device tree\n"); hang(); } preloader_console_init(); enable_tzc380(); power_init_board(); /* DDR initialization */ spl_dram_init(); board_init_r(NULL, 0); }