/* SPDX-License-Identifier: GPL-2.0 */ /dts-v1/; #include /include/ "skeleton.dtsi" /include/ "keyboard.dtsi" /include/ "reset.dtsi" /include/ "rtc.dtsi" /include/ "tsc_timer.dtsi" #ifdef CONFIG_CHROMEOS #include "chromeos-x86.dtsi" #include "flashmap-x86-ro.dtsi" #include "flashmap-16mb-rw.dtsi" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include / { model = "Google Coral"; compatible = "google,coral", "intel,apollolake"; aliases { cros-ec0 = &cros_ec; fsp = &fsp_s; spi0 = &spi; i2c0 = &i2c_0; i2c1 = &i2c_1; i2c2 = &i2c_2; i2c3 = &i2c_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; mmc1 = &sdmmc; }; board: board { compatible = "google,coral"; recovery-gpios = <&gpio_nw (-1) GPIO_ACTIVE_LOW>; write-protect-gpios = <&gpio_nw GPIO_75 GPIO_ACTIVE_HIGH>; phase-enforce-gpios = <&gpio_n GPIO_10 GPIO_ACTIVE_HIGH>; }; config { silent_console = <0>; }; chosen { stdout-path = &serial; e820-entries = /bits/ 64 < IOMAP_P2SB_BAR IOMAP_P2SB_SIZE E820_RESERVED MCH_BASE_ADDRESS MCH_SIZE E820_RESERVED>; u-boot,acpi-ssdt-order = <&cpu_0 &cpu_1 &cpu_2 &cpu_3 &i2c_0 &i2c_1 &i2c_2 &i2c_3 &i2c_4 &i2c_5 &sdmmc &maxim_codec &wifi &da_codec &tpm &elan_touchscreen &raydium_touchscreen &elan_touchpad &synaptics_touchpad &wacom_digitizer>; u-boot,acpi-dsdt-order = <&board &lpc>; }; clk: clock { compatible = "intel,apl-clk"; #clock-cells = <1>; }; cpus { u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <0>; cpu_0: cpu@0 { u-boot,dm-pre-reloc; device_type = "cpu"; compatible = "intel,apl-cpu"; reg = <0>; intel,apic-id = <0>; }; cpu_1: cpu@1 { device_type = "cpu"; compatible = "intel,apl-cpu"; reg = <1>; intel,apic-id = <2>; }; cpu_2: cpu@2 { device_type = "cpu"; compatible = "intel,apl-cpu"; reg = <2>; intel,apic-id = <4>; }; cpu_3: cpu@3 { device_type = "cpu"; compatible = "intel,apl-cpu"; reg = <3>; intel,apic-id = <6>; }; }; acpi_gpe: general-purpose-events { reg = ; compatible = "intel,acpi-gpe"; interrupt-controller; #interrupt-cells = <2>; }; keyboard { intel,duplicate-por; }; pci { compatible = "pci-x86"; #address-cells = <3>; #size-cells = <2>; u-boot,dm-pre-reloc; ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000 0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000 0x01000000 0x0 0x1000 0x1000 0 0xefff>; u-boot,skip-auto-config-until-reloc; host_bridge: host-bridge@0,0 { u-boot,dm-pre-reloc; reg = <0x00000000 0 0 0 0>; compatible = "intel,apl-hostbridge"; pciex-region-size = <0x10000000>; fspm,training-delay = <21>; /* * Parameters used by the FSP-S binary blob. This is * really unfortunate since these parameters mostly * relate to drivers but we need them in one place. We * could put them in the driver nodes easily, but then * would have to scan each node to find them. So just * dump them here for now. */ fsp_s: fsp-s { }; nhlt { intel,dmic-channels = <4>; }; }; punit@0,1 { u-boot,dm-pre-reloc; reg = <0x00000800 0 0 0 0>; compatible = "intel,apl-punit"; }; gma@2,0 { reg = <0x00001000 0 0 0 0>; compatible = "fsp-fb"; }; p2sb: p2sb@d,0 { u-boot,dm-pre-reloc; reg = <0x02006810 0 0 0 0>; compatible = "intel,p2sb"; early-regs = ; pci,no-autoconfig; n { compatible = "intel,apl-pinctrl"; u-boot,dm-pre-reloc; intel,p2sb-port-id = ; acpi,path = "\\_SB.GPO0"; gpio_n: gpio-n { compatible = "intel,gpio"; u-boot,dm-pre-reloc; gpio-controller; #gpio-cells = <2>; linux-name = "INT3452:00"; }; }; nw { u-boot,dm-pre-reloc; compatible = "intel,apl-pinctrl"; intel,p2sb-port-id = ; #gpio-cells = <2>; acpi,path = "\\_SB.GPO1"; gpio_nw: gpio-nw { compatible = "intel,gpio"; u-boot,dm-pre-reloc; gpio-controller; #gpio-cells = <2>; linux-name = "INT3452:01"; }; }; w { u-boot,dm-pre-reloc; compatible = "intel,apl-pinctrl"; intel,p2sb-port-id = ; #gpio-cells = <2>; acpi,path = "\\_SB.GPO2"; gpio_w: gpio-w { compatible = "intel,gpio"; u-boot,dm-pre-reloc; gpio-controller; #gpio-cells = <2>; linux-name = "INT3452:02"; }; }; sw { u-boot,dm-pre-reloc; compatible = "intel,apl-pinctrl"; intel,p2sb-port-id = ; #gpio-cells = <2>; acpi,path = "\\_SB.GPO3"; gpio_sw: gpio-sw { compatible = "intel,gpio"; u-boot,dm-pre-reloc; gpio-controller; #gpio-cells = <2>; linux-name = "INT3452:03"; }; }; itss { u-boot,dm-pre-reloc; compatible = "intel,itss"; intel,p2sb-port-id = ; intel,pmc-routes = < PMC_GPE_SW_31_0 GPIO_GPE_SW_31_0 PMC_GPE_SW_63_32 GPIO_GPE_SW_63_32 PMC_GPE_NW_31_0 GPIO_GPE_NW_31_0 PMC_GPE_NW_63_32 GPIO_GPE_NW_63_32 PMC_GPE_NW_95_64 GPIO_GPE_NW_95_64 PMC_GPE_N_31_0 GPIO_GPE_N_31_0 PMC_GPE_N_63_32 GPIO_GPE_N_63_32 PMC_GPE_W_31_0 GPIO_GPE_W_31_0>; }; }; pmc@d,1 { u-boot,dm-pre-reloc; reg = <0x6900 0 0 0 0>; /* * Values for BAR0, BAR2 and ACPI_BASE for when PCI * auto-configure is not available */ early-regs = <0xfe042000 0x2000 0xfe044000 0x2000 IOMAP_ACPI_BASE IOMAP_ACPI_SIZE>; compatible = "intel,apl-pmc"; gpe0-dwx-mask = <0xf>; gpe0-dwx-shift-base = <4>; /* * GPE configuration * Note that GPE events called out in ASL code rely on * this route, i.e., if this route changes then the * affected GPE * offset bits also need to be changed. * This sets the PMC register GPE_CFG fields. */ gpe0-dw = ; gpe0-sts = <0x20>; gpe0-en = <0x30>; }; audio@e,0 { reg = <0x7000 0 0 0 0>; compatible = "simple-bus"; acpi,name = "HDAS"; i2s { compatible = "fred"; }; maxim_codec: maxim-codec { compatible = "maxim,max98357a"; acpi,ddn = "Maxim Integrated 98357A Amplifier"; sdmode-gpios = <&gpio_n GPIO_76 GPIO_ACTIVE_HIGH>; sdmode-delay = <5>; acpi,name = "MAXM"; acpi,hid = "MX98357A"; acpi,audio-link = ; }; }; spi: fast-spi@d,2 { u-boot,dm-pre-reloc; reg = <0x02006a10 0 0 0 0>; #address-cells = <1>; #size-cells = <0>; compatible = "intel,fast-spi"; early-regs = ; intel,hardware-seq = <1>; fwstore_spi: spi-flash@0 { #size-cells = <1>; #address-cells = <1>; u-boot,dm-pre-reloc; reg = <0>; compatible = "winbond,w25q128fw", "jedec,spi-nor"; rw-mrc-cache { label = "rw-mrc-cache"; reg = <0x008e0000 0x00010000>; u-boot,dm-pre-reloc; }; rw-var-mrc-cache { label = "rw-mrc-cache"; reg = <0x008f0000 0x0001000>; u-boot,dm-pre-reloc; }; }; }; /* WiFi */ pcie-a0@14,0 { reg = <0x0000a000 0 0 0 0>; acpi,name = "RP01"; wifi: wifi { compatible = "intel,generic-wifi"; acpi,ddn = "Intel WiFi"; acpi,name = "WF00"; acpi,wake = ; interrupts-extended = <&acpi_gpe 0x3c 0>; }; }; i2c_0: i2c2@16,0 { compatible = "intel,apl-i2c"; reg = <0x0200b010 0 0 0 0>; clocks = <&clk CLK_I2C>; i2c-scl-rising-time-ns = <104>; i2c-scl-falling-time-ns = <52>; clock-frequency = <400000>; i2c,speeds = <100000 400000 1000000>; #address-cells = <1>; #size-cells = <0>; da_codec: da-codec { reg = <0x1a>; compatible = "dlg,da7219"; interrupts-extended = <&acpi_gpe GPIO_116_IRQ (IRQ_TYPE_LEVEL_LOW | X86_IRQ_TYPE_SHARED)>; acpi,name = "DLG7"; acpi,ddn = "Dialog Semiconductor DA7219 Audio Codec"; acpi,audio-link = ; dlg,micbias-lvl = <2600>; dlg,mic-amp-in-sel = "diff"; da7219_aad { dlg,btn-cfg = <50>; dlg,mic-det-thr = <500>; dlg,jack-ins-deb = <20>; dlg,jack-det-rate = "32ms_64ms"; dlg,jack-rem-deb = <1>; dlg,a-d-btn-thr = <0xa>; dlg,d-b-btn-thr = <0x16>; dlg,b-c-btn-thr = <0x21>; dlg,c-mic-btn-thr = <0x3e>; dlg,btn-avg = <4>; dlg,adc-1bit-rpt = <1>; }; }; }; i2c_1: i2c2@16,1 { compatible = "intel,apl-i2c"; reg = <0x0200b110 0 0 0 0>; clocks = <&clk CLK_I2C>; clock-frequency = <400000>; i2c,speeds = <100000 400000 1000000 3400000>; i2c-scl-rising-time-ns = <52>; i2c-scl-falling-time-ns = <52>; }; i2c_2: i2c2@16,2 { compatible = "intel,apl-i2c"; reg = <0x0200b210 0 0 0 0>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <400000>; i2c,speeds = <100000 400000 1000000>; clocks = <&clk CLK_I2C>; i2c-scl-rising-time-ns = <57>; i2c-scl-falling-time-ns = <28>; tpm: tpm@50 { reg = <0x50>; compatible = "google,cr50"; u-boot,i2c-offset-len = <0>; ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>; interrupts-extended = <&acpi_gpe GPIO_28_IRQ IRQ_TYPE_EDGE_FALLING>; acpi,hid = "GOOG0005"; acpi,ddn = "I2C TPM"; acpi,name = "TPMI"; }; }; i2c_3: i2c2@16,3 { compatible = "intel,apl-i2c"; reg = <0x0200b310 0 0 0 0>; #address-cells = <1>; #size-cells = <0>; clocks = <&clk CLK_I2C>; i2c-scl-rising-time-ns = <76>; i2c-scl-falling-time-ns = <164>; clock-frequency = <400000>; i2c,speeds = <100000 400000>; elan_touchscreen: elan-touchscreen@10 { compatible = "i2c-chip"; reg = <0x10>; acpi,hid = "ELAN0001"; acpi,ddn = "ELAN Touchscreen"; interrupts-extended = <&acpi_gpe GPIO_21_IRQ IRQ_TYPE_EDGE_FALLING>; linux,probed; reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>; reset-delay-ms = <20>; enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>; enable-delay-ms = <1>; acpi,has-power-resource; }; raydium_touchscreen: raydium-touchscreen@39 { compatible = "i2c-chip"; reg = <0x39>; acpi,hid = "RAYD0001"; acpi,ddn = "Raydium Touchscreen"; interrupts-extended = <&acpi_gpe GPIO_21_IRQ IRQ_TYPE_EDGE_FALLING>; linux,probed; reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>; reset-delay-ms = <1>; enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>; enable-delay-ms = <50>; acpi,has-power-resource; }; }; i2c_4: i2c2@17,0 { compatible = "intel,apl-i2c"; reg = <0x0200b810 0 0 0 0>; #address-cells = <1>; #size-cells = <0>; clocks = <&clk CLK_I2C>; i2c-sda-hold-time-ns = <350>; i2c-scl-rising-time-ns = <114>; i2c-scl-falling-time-ns = <164>; clock-frequency = <400000>; i2c,speeds = <100000 400000>; elan_touchpad: elan-touchpad@15 { compatible = "i2c-chip"; reg = <0x15>; u-boot,i2c-offset-len = <0>; acpi,hid = "ELAN0000"; acpi,ddn = "ELAN Touchpad"; interrupts-extended = <&acpi_gpe GPIO_18_IRQ IRQ_TYPE_EDGE_FALLING>; acpi,wake = ; linux,probed; }; synaptics_touchpad: synaptics-touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; acpi,hid = "PNP0C50"; acpi,ddn = "Synaptics Touchpad"; interrupts-extended = <&acpi_gpe GPIO_18_IRQ IRQ_TYPE_EDGE_FALLING>; acpi,wake = ; linux,probed; hid-descr-addr = <0x20>; }; }; i2c_5: i2c2@17,1 { compatible = "intel,apl-i2c"; reg = <0x0200b910 0 0 0 0>; #address-cells = <1>; #size-cells = <0>; clocks = <&clk CLK_I2C>; i2c-scl-rising-time-ns = <76>; i2c-scl-falling-time-ns = <164>; clock-frequency = <400000>; i2c,speeds = <100000 400000 1000000>; wacom_digitizer: wacom-digitizer@9 { compatible = "hid-over-i2c"; reg = <0x9>; acpi,hid = "WCOM50C1"; acpi,ddn = "WCOM Digitizer"; interrupts-extended = <&acpi_gpe GPIO_13_IRQ (IRQ_TYPE_LEVEL_LOW | X86_IRQ_TYPE_SHARED)>; hid-descr-addr = <0x1>; }; }; i2c_6: i2c2@17,2 { compatible = "intel,apl-i2c"; reg = <0x0200ba10 0 0 0 0>; clocks = <&clk CLK_I2C>; status = "disabled"; }; i2c_7: i2c2@17,3 { compatible = "intel,apl-i2c"; reg = <0x0200bb10 0 0 0 0>; clocks = <&clk CLK_I2C>; status = "disabled"; }; serial: serial@18,2 { reg = <0x0200c210 0 0 0 0>; u-boot,dm-pre-reloc; compatible = "intel,apl-ns16550"; early-regs = <0xde000000 0x20>; reg-shift = <2>; clock-frequency = <1843200>; current-speed = <115200>; acpi,name = "URT3"; pci,no-autoconfig; }; sdmmc: sdmmc@1b,0 { reg = <0x0000d800 0 0 0 0>; compatible = "intel,apl-sd"; cd-gpios = <&gpio_n GPIO_177 GPIO_ACTIVE_LOW>; acpi,name = "SDCD"; }; pch: pch@1f,0 { reg = <0x0000f800 0 0 0 0>; compatible = "intel,apl-pch"; u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; lpc: lpc { compatible = "intel,apl-lpc"; #address-cells = <1>; #size-cells = <0>; u-boot,dm-pre-reloc; cros_ec: cros-ec { u-boot,dm-pre-reloc; compatible = "google,cros-ec-lpc"; reg = <0x204 1 0x200 1 0x880 0x80>; /* * Describes the flash memory within * the EC */ #address-cells = <1>; #size-cells = <1>; flash@8000000 { reg = <0x08000000 0x20000>; erase-value = <0xff>; }; }; }; }; }; }; &host_bridge { /* * PL1 override 12000 mW: the energy calculation is wrong with the * current VR solution. Experiments show that SoC TDP max (6W) can be * reached when RAPL PL1 is set to 12W. Set RAPL PL2 to 15W. */ tdp-pl-override-mw = <12000 15000>; early-pads = < /* These two are for the debug UART */ GPIO_46 /* UART2 RX */ (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) (PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE) GPIO_47 /* UART2 TX */ (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) (PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE) GPIO_75 /* I2S1_BCLK -- PCH_WP */ (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP) (PAD_CFG1_PULL_UP_20K | PAD_CFG1_IOSSTATE_TXD_RXE) /* I2C2 - TPM */ GPIO_128 /* LPSS_I2C2_SDA */ (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) (PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE) GPIO_129 /* LPSS_I2C2_SCL */ (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP) (PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE) GPIO_28 /* TPM IRQ */ (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP | PAD_CFG0_TX_DISABLE | PAD_CFG0_ROUTE_IOAPIC | PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_INVERT) (PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TXD_RXE) /* * WLAN_PE_RST - default to deasserted just in case FSP * misbehaves */ GPIO_122 /* SIO_SPI_2_RXD */ (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP | PAD_CFG0_RX_DISABLE | 0) (PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TX_LAST_RXE) /* LPC */ PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */ PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */ PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1) PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */ PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */ PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */ PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */ PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */ PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */ >; fspm,package = ; fspm,profile = ; fspm,memory-down = ; fspm,scrambler-support = <1>; fspm,interleaved-mode = ; fspm,channel-hash-mask = <0x36>; fspm,slice-hash-mask = <0x9>; fspm,dual-rank-support-enable = <1>; fspm,low-memory-max-value = <2048>; fspm,ch0-rank-enable = <1>; fspm,ch0-device-width = ; fspm,ch0-dram-density = ; fspm,ch0-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch0-odt-config = ; fspm,ch1-rank-enable = <1>; fspm,ch1-device-width = ; fspm,ch1-dram-density = ; fspm,ch1-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch1-odt-config = ; fspm,ch2-rank-enable = <1>; fspm,ch2-device-width = ; fspm,ch2-dram-density = ; fspm,ch2-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch2-odt-config = ; fspm,ch3-rank-enable = <1>; fspm,ch3-device-width = ; fspm,ch3-dram-density = ; fspm,ch3-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch3-odt-config = ; fspm,fspm,skip-cse-rbp = <1>; fspm,ch-bit-swizzling = /bits/ 8 < /* LP4_PHYS_CH0A */ /* DQA[0:7] pins of LPDDR4 module */ 6 7 5 4 3 1 0 2 /* DQA[8:15] pins of LPDDR4 module */ 12 10 11 13 14 8 9 15 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 16 22 23 20 18 17 19 21 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 30 28 29 25 24 26 27 31 /* LP4_PHYS_CH0B */ /* DQA[0:7] pins of LPDDR4 module */ 7 3 5 2 6 0 1 4 /* DQA[8:15] pins of LPDDR4 module */ 9 14 12 13 10 11 8 15 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 20 22 23 16 19 17 18 21 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 28 24 26 27 29 30 31 25 /* LP4_PHYS_CH1A */ /* DQA[0:7] pins of LPDDR4 module */ 2 1 6 7 5 4 3 0 /* DQA[8:15] pins of LPDDR4 module */ 11 10 8 9 12 15 13 14 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 17 23 19 16 21 22 20 18 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 31 29 26 25 28 27 24 30 /* LP4_PHYS_CH1B */ /* DQA[0:7] pins of LPDDR4 module */ 4 3 7 5 6 1 0 2 /* DQA[8:15] pins of LPDDR4 module */ 15 9 8 11 14 13 12 10 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 20 23 22 21 18 19 16 17 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 25 28 30 31 26 27 24 29>; fspm,dimm0-spd-address = <0>; fspm,dimm1-spd-address = <0>; fspm,skip-cse-rbp = <1>; fspm,enable-s3-heci2 = <0>; }; &fsp_s { u-boot,dm-pre-proper; fsps,ish-enable = <0>; fsps,enable-sata = <0>; fsps,i2c6-enable = ; fsps,i2c7-enable = ; fsps,hsuart3-enable = ; fsps,spi1-enable = ; fsps,spi2-enable = ; fsps,sdio-enabled = <0>; /* Disable unused clkreq of PCIe root ports */ fsps,pcie-rp-clk-req-number = /bits/ 8 <0 /* wifi/bt */ CLKREQ_DISABLED CLKREQ_DISABLED CLKREQ_DISABLED CLKREQ_DISABLED CLKREQ_DISABLED>; /* * GPIO for PERST_0 * If the Board has PERST_0 signal, assign the GPIO * If the Board does not have PERST_0, assign GPIO_PRT0_UDEF * * This are not used yet, so comment them out for now. * * prt0-gpio = ; * * GPIO for SD card detect * sdcard-cd-gpio = ; */ /* * Order is emmc-tx-data-cntl1, emmc-tx-data-cntl2, * emmc-rx-cmd-data-cntl1, emmc-rx-cmd-data-cntl2 * * EMMC TX DATA Delay 1 * Refer to EDS-Vol2-22.3 * [14:8] steps of delay for HS400, each 125ps * [6:0] steps of delay for SDR104/HS200, each 125ps /* * EMMC TX DATA Delay 2 * Refer to EDS-Vol2-22.3. * [30:24] steps of delay for SDR50, each 125ps * [22:16] steps of delay for DDR50, each 125ps * [14:8] steps of delay for SDR25/HS50, each 125ps * [6:0] steps of delay for SDR12, each 125ps */ /* * EMMC RX CMD/DATA Delay 1 * Refer to EDS-Vol2-22.3. * [30:24] steps of delay for SDR50, each 125ps * [22:16] steps of delay for DDR50, each 125ps * [14:8] steps of delay for SDR25/HS50, each 125ps * [6:0] steps of delay for SDR12, each 125ps */ /* * EMMC RX CMD/DATA Delay 2 * Refer to EDS-Vol2-22.3. * [17:16] stands for Rx Clock before Output Buffer * [14:8] steps of delay for Auto Tuning Mode, each 125ps * [6:0] steps of delay for HS200, each 125ps */ /* Enable DPTF */ fsps,dptf-enabled; fsps,emmc-tx-data-cntl1 = <0x0c16>; fsps,emmc-tx-data-cntl2 = <0x28162828>; fsps,emmc-rx-cmd-data-cntl1 = <0x00181717>; fsps,emmc-rx-cmd-data-cntl2 = <0x10008>; /* Enable Audio Clock and Power gating */ fsps,hd-audio-clk-gate = <1>; fsps,hd-audio-pwr-gate = <1>; fsps,bios-cfg-lock-down = <1>; /* Enable WiFi */ fsps,pcie-root-port-en = [01 00 00 00 00 00]; fsps,pcie-rp-hot-plug = [00 00 00 00 00 00]; fsps,skip-mp-init = <1>; fsps,spi-eiss = <0>; fsps,rtc-lock = <0>; fsps,port-usb20-per-port-pe-txi-set = [07 07 06 06 07 07 07 01]; fsps,port-usb20-per-port-txi-set = [00 02 00 00 00 00 00 03]; fsps,lpss-s0ix-enable = <1>; fsps,usb-otg = <0>; fsps,monitor-mwait-enable = <0>; /* * TODO(sjg@chromium.org): Move this to the I2C nodes * Intel Common SoC Config *+-------------------+---------------------------+ *| Field | Value | *+-------------------+---------------------------+ *| I2C0 | Audio | *| I2C2 | TPM | *| I2C3 | Touchscreen | *| I2C4 | Trackpad | *| I2C5 | Digitizer | *+-------------------+---------------------------+ * common_soc_config" = "{ .i2c[0] = { .speed = I2C_SPEED_FAST, .rise-time-ns = 104, .fall-time-ns = 52, }, .i2c[2] = { .early_init = 1, .speed = I2C_SPEED_FAST, .rise-time-ns = 57, .fall-time-ns = 28, }, .i2c[3] = { .speed = I2C_SPEED_FAST, .rise-time-ns = 76, .fall-time-ns = 164, }, .i2c[4] = { .speed = I2C_SPEED_FAST, .rise-time-ns = 114, .fall-time-ns = 164, .data_hold_time_ns = 350, }, .i2c[5] = { .speed = I2C_SPEED_FAST, .rise-time-ns = 152, .fall-time-ns = 30, }, }" */ /* Minimum SLP S3 assertion width 28ms */ slp-s3-assertion-width-usecs = <28000>; pads = < /* PCIE_WAKE[0:3]_N */ PAD_CFG_GPI_SCI_LOW(GPIO_205, UP_20K, DEEP, EDGE_SINGLE) /* WLAN */ PAD_CFG_GPI(GPIO_206, UP_20K, DEEP) /* Unused */ PAD_CFG_GPI(GPIO_207, UP_20K, DEEP) /* Unused */ PAD_CFG_GPI(GPIO_208, UP_20K, DEEP) /* Unused */ /* EMMC interface */ PAD_CFG_NF(GPIO_156, DN_20K, DEEP, NF1) /* EMMC_CLK */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_157, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D0 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_158, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D1 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_159, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D2 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_160, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D3 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_161, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D4 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_162, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D5 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_163, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D6 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_164, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D7 */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_165, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_CMD */ PAD_CFG_NF(GPIO_182, DN_20K, DEEP, NF1) /* EMMC_RCLK */ /* SDIO -- unused */ PAD_CFG_GPI(GPIO_166, UP_20K, DEEP) /* SDIO_CLK */ PAD_CFG_GPI(GPIO_167, UP_20K, DEEP) /* SDIO_D0 */ /* Configure SDIO to enable power gating */ PAD_CFG_NF(GPIO_168, UP_20K, DEEP, NF1) /* SDIO_D1 */ PAD_CFG_GPI(GPIO_169, UP_20K, DEEP) /* SDIO_D2 */ PAD_CFG_GPI(GPIO_170, UP_20K, DEEP) /* SDIO_D3 */ PAD_CFG_GPI(GPIO_171, UP_20K, DEEP) /* SDIO_CMD */ /* SDCARD */ /* Pull down clock by 20K */ PAD_CFG_NF(GPIO_172, DN_20K, DEEP, NF1) /* SDCARD_CLK */ PAD_CFG_NF(GPIO_173, UP_20K, DEEP, NF1) /* SDCARD_D0 */ PAD_CFG_NF(GPIO_174, UP_20K, DEEP, NF1) /* SDCARD_D1 */ PAD_CFG_NF(GPIO_175, UP_20K, DEEP, NF1) /* SDCARD_D2 */ PAD_CFG_NF(GPIO_176, UP_20K, DEEP, NF1) /* SDCARD_D3 */ /* Card detect is active LOW with external pull up */ PAD_CFG_NF(GPIO_177, NONE, DEEP, NF1) /* SDCARD_CD_N */ PAD_CFG_NF(GPIO_178, UP_20K, DEEP, NF1) /* SDCARD_CMD */ /* CLK feedback, internal signal, needs 20K pull down */ PAD_CFG_NF(GPIO_179, DN_20K, DEEP, NF1) /* SDCARD_CLK_FB */ /* No h/w write proect for uSD cards, pull down by 20K */ PAD_CFG_NF(GPIO_186, DN_20K, DEEP, NF1) /* SDCARD_LVL_WP */ /* EN_SD_SOCKET_PWR_L for SD slot power control. Default on */ PAD_CFG_GPO(GPIO_183, 0, DEEP) /* SDIO_PWR_DOWN_N */ /* SMBus -- unused */ PAD_CFG_GPI(SMB_ALERTB, UP_20K, DEEP) /* SMB_ALERT _N */ PAD_CFG_GPI(SMB_CLK, UP_20K, DEEP) /* SMB_CLK */ PAD_CFG_GPI(SMB_DATA, UP_20K, DEEP) /* SMB_DATA */ /* LPC */ PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */ PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */ PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1) PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */ PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */ PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */ PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */ PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */ PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */ /* I2C0 - Audio */ PAD_CFG_NF(GPIO_124, UP_2K, DEEP, NF1) /* LPSS_I2C0_SDA */ PAD_CFG_NF(GPIO_125, UP_2K, DEEP, NF1) /* LPSS_I2C0_SCL */ /* I2C1 - NFC with external pulls */ PAD_CFG_NF(GPIO_126, NONE, DEEP, NF1) /* LPSS_I2C1_SDA */ PAD_CFG_NF(GPIO_127, NONE, DEEP, NF1) /* LPSS_I2C1_SCL */ /* I2C2 - TPM */ PAD_CFG_NF(GPIO_128, UP_2K, DEEP, NF1) /* LPSS_I2C2_SDA */ PAD_CFG_NF(GPIO_129, UP_2K, DEEP, NF1) /* LPSS_I2C2_SCL */ /* I2C3 - touch */ PAD_CFG_NF(GPIO_130, UP_2K, DEEP, NF1) /* LPSS_I2C3_SDA */ PAD_CFG_NF(GPIO_131, UP_2K, DEEP, NF1) /* LPSS_I2C3_SCL */ /* I2C4 - trackpad */ /* LPSS_I2C4_SDA */ PAD_CFG_NF_IOSSTATE(GPIO_132, UP_2K, DEEP, NF1, HIZCRX1) /* LPSS_I2C4_SCL */ PAD_CFG_NF_IOSSTATE(GPIO_133, UP_2K, DEEP, NF1, HIZCRX1) /* I2C5 -- pen with external pulls */ PAD_CFG_NF(GPIO_134, NONE, DEEP, NF1) /* LPSS_I2C5_SDA */ PAD_CFG_NF(GPIO_135, NONE, DEEP, NF1) /* LPSS_I2C5_SCL */ /* I2C6-7 -- unused */ PAD_CFG_GPI(GPIO_136, UP_20K, DEEP) /* LPSS_I2C6_SDA */ PAD_CFG_GPI(GPIO_137, UP_20K, DEEP) /* LPSS_I2C6_SCL */ PAD_CFG_GPI(GPIO_138, UP_20K, DEEP) /* LPSS_I2C7_SDA */ PAD_CFG_GPI(GPIO_139, UP_20K, DEEP) /* LPSS_I2C7_SCL */ /* Audio Amp - I2S6 */ PAD_CFG_NF(GPIO_146, NATIVE, DEEP, NF2) /* ISH_GPIO_0 - I2S6_BCLK */ PAD_CFG_NF(GPIO_147, NATIVE, DEEP, NF2) /* ISH_GPIO_1 - I2S6_WS_SYNC */ PAD_CFG_GPI(GPIO_148, UP_20K, DEEP) /* ISH_GPIO_2 - unused */ PAD_CFG_NF(GPIO_149, NATIVE, DEEP, NF2) /* ISH_GPIO_3 - I2S6_SDO */ /* NFC Reset */ PAD_CFG_GPO(GPIO_150, 1, DEEP) /* ISH_GPIO_4 */ PAD_CFG_GPI(GPIO_151, UP_20K, DEEP) /* ISH_GPIO_5 - unused */ /* Touch enable */ PAD_CFG_GPO(GPIO_152, 1, DEEP) /* ISH_GPIO_6 */ PAD_CFG_GPI(GPIO_153, UP_20K, DEEP) /* ISH_GPIO_7 - unused */ PAD_CFG_GPI(GPIO_154, UP_20K, DEEP) /* ISH_GPIO_8 - unused */ PAD_CFG_GPI(GPIO_155, UP_20K, DEEP) /* ISH_GPIO_9 - unused */ /* PCIE_CLKREQ[0:3]_N */ PAD_CFG_NF(GPIO_209, NONE, DEEP, NF1) /* WLAN with external pull */ PAD_CFG_GPI(GPIO_210, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_211, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_212, UP_20K, DEEP) /* unused */ /* OSC_CLK_OUT_[0:4] -- unused */ PAD_CFG_GPI(OSC_CLK_OUT_0, UP_20K, DEEP) PAD_CFG_GPI(OSC_CLK_OUT_1, UP_20K, DEEP) PAD_CFG_GPI(OSC_CLK_OUT_2, UP_20K, DEEP) PAD_CFG_GPI(OSC_CLK_OUT_3, UP_20K, DEEP) PAD_CFG_GPI(OSC_CLK_OUT_4, UP_20K, DEEP) /* PMU Signals */ PAD_CFG_GPI(PMU_AC_PRESENT, UP_20K, DEEP) /* PMU_AC_PRESENT - unused */ PAD_CFG_NF(PMU_BATLOW_B, UP_20K, DEEP, NF1) /* PMU_BATLOW_N */ PAD_CFG_NF(PMU_PLTRST_B, NONE, DEEP, NF1) /* PMU_PLTRST_N */ PAD_CFG_NF(PMU_PWRBTN_B, UP_20K, DEEP, NF1) /* PMU_PWRBTN_N */ PAD_CFG_NF(PMU_RESETBUTTON_B, NONE, DEEP, NF1) /* PMU_RSTBTN_N */ PAD_CFG_NF_IOSSTATE(PMU_SLP_S0_B, NONE, DEEP, NF1, IGNORE) /* PMU_SLP_S0_N */ PAD_CFG_NF(PMU_SLP_S3_B, NONE, DEEP, NF1) /* PMU_SLP_S3_N */ PAD_CFG_NF(PMU_SLP_S4_B, NONE, DEEP, NF1) /* PMU_SLP_S4_N */ PAD_CFG_NF(PMU_SUSCLK, NONE, DEEP, NF1) /* PMU_SUSCLK */ PAD_CFG_GPO(PMU_WAKE_B, 1, DEEP) /* EN_PP3300_EMMC */ PAD_CFG_NF(SUS_STAT_B, NONE, DEEP, NF1) /* SUS_STAT_N */ PAD_CFG_NF(SUSPWRDNACK, NONE, DEEP, NF1) /* SUSPWRDNACK */ /* DDI[0:1] SDA and SCL -- unused */ PAD_CFG_GPI(GPIO_187, UP_20K, DEEP) /* HV_DDI0_DDC_SDA */ PAD_CFG_GPI(GPIO_188, UP_20K, DEEP) /* HV_DDI0_DDC_SCL */ PAD_CFG_GPI(GPIO_189, UP_20K, DEEP) /* HV_DDI1_DDC_SDA */ PAD_CFG_GPI(GPIO_190, UP_20K, DEEP) /* HV_DDI1_DDC_SCL */ /* MIPI I2C -- unused */ PAD_CFG_GPI(GPIO_191, UP_20K, DEEP) /* MIPI_I2C_SDA */ PAD_CFG_GPI(GPIO_192, UP_20K, DEEP) /* MIPI_I2C_SCL */ /* Panel 0 control */ PAD_CFG_NF(GPIO_193, NATIVE, DEEP, NF1) /* PNL0_VDDEN */ PAD_CFG_NF(GPIO_194, NATIVE, DEEP, NF1) /* PNL0_BKLTEN */ PAD_CFG_NF(GPIO_195, NATIVE, DEEP, NF1) /* PNL0_BKLTCTL */ /* Panel 1 control -- unused */ PAD_CFG_NF(GPIO_196, NATIVE, DEEP, NF1) /* PNL1_VDDEN */ PAD_CFG_NF(GPIO_197, NATIVE, DEEP, NF1) /* PNL1_BKLTEN */ PAD_CFG_NF(GPIO_198, NATIVE, DEEP, NF1) /* PNL1_BKLTCTL */ /* Hot plug detect */ PAD_CFG_NF(GPIO_199, UP_20K, DEEP, NF2) /* HV_DDI1_HPD */ PAD_CFG_NF(GPIO_200, UP_20K, DEEP, NF2) /* HV_DDI0_HPD */ /* MDSI signals -- unused */ PAD_CFG_GPI(GPIO_201, UP_20K, DEEP) /* MDSI_A_TE */ PAD_CFG_GPI(GPIO_202, UP_20K, DEEP) /* MDSI_A_TE */ /* USB overcurrent pins */ PAD_CFG_NF(GPIO_203, UP_20K, DEEP, NF1) /* USB_OC0_N */ PAD_CFG_NF(GPIO_204, UP_20K, DEEP, NF1) /* USB_OC1_N */ /* PMC SPI -- almost entirely unused */ PAD_CFG_GPI(PMC_SPI_FS0, UP_20K, DEEP) PAD_CFG_NF(PMC_SPI_FS1, UP_20K, DEEP, NF2) /* HV_DDI2_HPD -- EDP HPD */ PAD_CFG_GPI(PMC_SPI_FS2, UP_20K, DEEP) PAD_CFG_GPI(PMC_SPI_RXD, UP_20K, DEEP) PAD_CFG_GPI(PMC_SPI_TXD, UP_20K, DEEP) PAD_CFG_GPI(PMC_SPI_CLK, UP_20K, DEEP) /* PMIC Signals Unused signals related to an old PMIC interface */ PAD_CFG_NF_IOSSTATE(PMIC_RESET_B, NATIVE, DEEP, NF1, IGNORE) /* PMIC_RESET_B */ PAD_CFG_GPI(GPIO_213, NONE, DEEP) /* unused external pull */ PAD_CFG_GPI(GPIO_214, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_215, UP_20K, DEEP) /* unused */ PAD_CFG_NF(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1) /* THERMTRIP_N */ PAD_CFG_GPI(PMIC_STDBY, UP_20K, DEEP) /* unused */ PAD_CFG_NF(PROCHOT_B, UP_20K, DEEP, NF1) /* PROCHOT_N */ PAD_CFG_NF(PMIC_I2C_SCL, UP_1K, DEEP, NF1) /* PMIC_I2C_SCL */ PAD_CFG_NF(PMIC_I2C_SDA, UP_1K, DEEP, NF1) /* PMIC_I2C_SDA */ /* I2S1 -- largely unused */ PAD_CFG_GPI(GPIO_74, UP_20K, DEEP) /* I2S1_MCLK */ PAD_CFG_GPI(GPIO_75, UP_20K, DEEP) /* I2S1_BCLK -- PCH_WP */ PAD_CFG_GPO(GPIO_76, 0, DEEP) /* I2S1_WS_SYNC -- SPK_PA_EN */ PAD_CFG_GPI(GPIO_77, UP_20K, DEEP) /* I2S1_SDI */ PAD_CFG_GPO(GPIO_78, 1, DEEP) /* I2S1_SDO -- EN_PP3300_DX_LTE_SOC */ /* DMIC or I2S4 */ /* AVS_DMIC_CLK_A1 */ PAD_CFG_NF_IOSSTATE(GPIO_79, NATIVE, DEEP, NF1, IGNORE) PAD_CFG_NF(GPIO_80, NATIVE, DEEP, NF1) /* AVS_DMIC_CLK_B1 */ PAD_CFG_NF(GPIO_81, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_1 */ PAD_CFG_GPI(GPIO_82, DN_20K, DEEP) /* unused -- strap */ PAD_CFG_NF(GPIO_83, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_2 */ /* I2S2 -- Headset amp */ PAD_CFG_NF(GPIO_84, NATIVE, DEEP, NF1) /* AVS_I2S2_MCLK */ PAD_CFG_NF(GPIO_85, NATIVE, DEEP, NF1) /* AVS_I2S2_BCLK */ PAD_CFG_NF(GPIO_86, NATIVE, DEEP, NF1) /* AVS_I2S2_SW_SYNC */ PAD_CFG_NF(GPIO_87, NATIVE, DEEP, NF1) /* AVS_I2S2_SDI */ PAD_CFG_NF(GPIO_88, NATIVE, DEEP, NF1) /* AVS_I2S2_SDO */ /* I2S3 -- largely unused */ PAD_CFG_GPI(GPIO_89, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_90, UP_20K, DEEP) /* GPS_HOST_WAKE */ PAD_CFG_GPO(GPIO_91, 1, DEEP) /* GPS_EN */ PAD_CFG_GPI(GPIO_92, DN_20K, DEEP) /* unused -- strap */ /* Fast SPI */ PAD_CFG_NF_IOSSTATE(GPIO_97, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CS0_B */ PAD_CFG_GPI(GPIO_98, UP_20K, DEEP) /* FST_SPI_CS1_B -- unused */ PAD_CFG_NF_IOSSTATE(GPIO_99, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MOSI_IO0 */ PAD_CFG_NF_IOSSTATE(GPIO_100, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MISO_IO1 */ PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */ PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */ PAD_CFG_NF_IOSSTATE(GPIO_103, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK */ PAD_CFG_NF_IOSSTATE(FST_SPI_CLK_FB, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK_FB */ PAD_CFG_NF_IOSSTATE(GPIO_106, NATIVE, DEEP, NF3, IGNORE) /* FST_SPI_CS2_N */ /* SIO_SPI_0 - Used for FP */ PAD_CFG_NF(GPIO_104, NATIVE, DEEP, NF1) /* SIO_SPI_0_CLK */ PAD_CFG_NF(GPIO_105, NATIVE, DEEP, NF1) /* SIO_SPI_0_FS0 */ PAD_CFG_NF(GPIO_109, NATIVE, DEEP, NF1) /* SIO_SPI_0_RXD */ PAD_CFG_NF(GPIO_110, NATIVE, DEEP, NF1) /* SIO_SPI_0_TXD */ /* SIO_SPI_1 -- largely unused */ PAD_CFG_GPI(GPIO_111, UP_20K, DEEP) /* SIO_SPI_1_CLK */ PAD_CFG_GPI(GPIO_112, UP_20K, DEEP) /* SIO_SPI_1_FS0 */ PAD_CFG_GPI(GPIO_113, UP_20K, DEEP) /* SIO_SPI_1_FS1 */ /* Headset interrupt */ PAD_CFG_GPI_APIC_LOW(GPIO_116, NONE, DEEP) /* SIO_SPI_1_RXD */ PAD_CFG_GPI(GPIO_117, UP_20K, DEEP) /* SIO_SPI_1_TXD */ /* SIO_SPI_2 -- unused */ PAD_CFG_GPI(GPIO_118, UP_20K, DEEP) /* SIO_SPI_2_CLK */ PAD_CFG_GPI(GPIO_119, UP_20K, DEEP) /* SIO_SPI_2_FS0 */ PAD_CFG_GPI(GPIO_120, UP_20K, DEEP) /* SIO_SPI_2_FS1 */ PAD_CFG_GPI(GPIO_121, UP_20K, DEEP) /* SIO_SPI_2_FS2 */ /* WLAN_PE_RST - default to deasserted */ PAD_CFG_GPO(GPIO_122, 0, DEEP) /* SIO_SPI_2_RXD */ PAD_CFG_GPI(GPIO_123, UP_20K, DEEP) /* SIO_SPI_2_TXD */ /* Debug tracing */ PAD_CFG_GPI(GPIO_0, UP_20K, DEEP) PAD_CFG_GPI(GPIO_1, UP_20K, DEEP) PAD_CFG_GPI(GPIO_2, UP_20K, DEEP) PAD_CFG_GPI_SCI_HIGH(GPIO_3, DN_20K, DEEP, LEVEL) /* FP_INT */ PAD_CFG_GPI(GPIO_4, UP_20K, DEEP) PAD_CFG_GPI(GPIO_5, UP_20K, DEEP) PAD_CFG_GPI(GPIO_6, UP_20K, DEEP) PAD_CFG_GPI(GPIO_7, UP_20K, DEEP) PAD_CFG_GPI(GPIO_8, UP_20K, DEEP) PAD_CFG_GPI_APIC_LOW(GPIO_9, NONE, DEEP) /* dTPM IRQ */ PAD_CFG_GPI(GPIO_10, DN_20K, DEEP) /* Board phase enforcement */ PAD_CFG_GPI_SCI_LOW(GPIO_11, NONE, DEEP, EDGE_SINGLE) /* EC SCI */ PAD_CFG_GPI(GPIO_12, UP_20K, DEEP) /* unused */ PAD_CFG_GPI_APIC_LOW(GPIO_13, NONE, DEEP) /* PEN_INT_ODL */ PAD_CFG_GPI_APIC_HIGH(GPIO_14, DN_20K, DEEP) /* FP_INT */ PAD_CFG_GPI_SCI_LOW(GPIO_15, NONE, DEEP, EDGE_SINGLE) /* TRACKPAD_INT_1V8_ODL */ PAD_CFG_GPI(GPIO_16, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_17, UP_20K, DEEP) /* 1 vs 4 DMIC config */ PAD_CFG_GPI_APIC_LOW(GPIO_18, NONE, DEEP) /* Trackpad IRQ */ PAD_CFG_GPI(GPIO_19, UP_20K, DEEP) /* unused */ PAD_CFG_GPI_APIC_LOW(GPIO_20, UP_20K, DEEP) /* NFC IRQ */ PAD_CFG_GPI_APIC_LOW(GPIO_21, NONE, DEEP) /* Touch IRQ */ PAD_CFG_GPI_SCI_LOW(GPIO_22, NONE, DEEP, EDGE_SINGLE) /* EC wake */ PAD_CFG_GPI(GPIO_23, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_24, NONE, DEEP) /* PEN_PDCT_ODL */ PAD_CFG_GPI(GPIO_25, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_26, UP_20K, DEEP) /* unused */ PAD_CFG_GPI(GPIO_27, UP_20K, DEEP) /* unused */ PAD_CFG_GPI_APIC_LOW(GPIO_28, NONE, DEEP) /* TPM IRQ */ PAD_CFG_GPO(GPIO_29, 1, DEEP) /* FP reset */ PAD_CFG_GPI_APIC_LOW(GPIO_30, NONE, DEEP) /* KB IRQ */ PAD_CFG_GPO(GPIO_31, 0, DEEP) /* NFC FW DL */ PAD_CFG_NF(GPIO_32, NONE, DEEP, NF5) /* SUS_CLK2 */ PAD_CFG_GPI_APIC_LOW(GPIO_33, NONE, DEEP) /* PMIC IRQ */ PAD_CFG_GPI(GPIO_34, UP_20K, DEEP) /* unused */ PAD_CFG_GPO(GPIO_35, 0, DEEP) /* PEN_RESET - active high */ PAD_CFG_GPO(GPIO_36, 0, DEEP) /* touch reset */ PAD_CFG_GPI(GPIO_37, UP_20K, DEEP) /* unused */ /* LPSS_UART[0:2] */ PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/ /* Next 2 are straps */ PAD_CFG_GPI(GPIO_39, DN_20K, DEEP) /* LPSS_UART0_TXD - unused */ PAD_CFG_GPI(GPIO_40, DN_20K, DEEP) /* LPSS_UART0_RTS - unused */ PAD_CFG_GPI(GPIO_41, NONE, DEEP) /* LPSS_UART0_CTS - EC_IN_RW */ PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1) /* LPSS_UART1_RXD */ PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1) /* LPSS_UART1_TXD */ PAD_CFG_GPO(GPIO_44, 1, DEEP) /* GPS_RST_ODL */ PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */ PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1) /* LPSS_UART2_RXD */ PAD_CFG_NF_IOSSTATE(GPIO_47, NATIVE, DEEP, NF1, TX1_RX_DCR_X0) /* UART2 TX */ PAD_CFG_GPI(GPIO_48, UP_20K, DEEP) /* LPSS_UART2_RTS - unused */ PAD_CFG_GPI_SMI_LOW(GPIO_49, NONE, DEEP, EDGE_SINGLE) /* LPSS_UART2_CTS - EC_SMI_L */ /* Camera interface -- completely unused */ PAD_CFG_GPI(GPIO_62, UP_20K, DEEP) /* GP_CAMERASB00 */ PAD_CFG_GPI(GPIO_63, UP_20K, DEEP) /* GP_CAMERASB01 */ PAD_CFG_GPI(GPIO_64, UP_20K, DEEP) /* GP_CAMERASB02 */ PAD_CFG_GPI(GPIO_65, UP_20K, DEEP) /* GP_CAMERASB03 */ PAD_CFG_GPI(GPIO_66, UP_20K, DEEP) /* GP_CAMERASB04 */ PAD_CFG_GPI(GPIO_67, UP_20K, DEEP) /* GP_CAMERASB05 */ PAD_CFG_GPI(GPIO_68, UP_20K, DEEP) /* GP_CAMERASB06 */ PAD_CFG_GPI(GPIO_69, UP_20K, DEEP) /* GP_CAMERASB07 */ PAD_CFG_GPI(GPIO_70, UP_20K, DEEP) /* GP_CAMERASB08 */ PAD_CFG_GPI(GPIO_71, UP_20K, DEEP) /* GP_CAMERASB09 */ PAD_CFG_GPI(GPIO_72, UP_20K, DEEP) /* GP_CAMERASB10 */ PAD_CFG_GPI(GPIO_73, UP_20K, DEEP) /* GP_CAMERASB11 */ >; };