// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) ASPEED Technology Inc. */ #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; #define CLKIN_25M 25000000UL /* MAC Clock Delay settings */ #define MAC12_DEF_DELAY_1G 0x0028a410 #define MAC12_DEF_DELAY_100M 0x00410410 #define MAC12_DEF_DELAY_10M 0x00410410 #define MAC34_DEF_DELAY_1G 0x00104208 #define MAC34_DEF_DELAY_100M 0x00104208 #define MAC34_DEF_DELAY_10M 0x00104208 /* * 3-bit encode of CPU freqeucy * Some code is duplicated */ enum ast2600_cpu_freq { CPU_FREQ_1200M_1, CPU_FREQ_1600M_1, CPU_FREQ_1200M_2, CPU_FREQ_1600M_2, CPU_FREQ_800M_1, CPU_FREQ_800M_2, CPU_FREQ_800M_3, CPU_FREQ_800M_4, }; struct ast2600_clk_priv { struct ast2600_scu *scu; }; /* * Clock divider/multiplier configuration struct. * For H-PLL and M-PLL the formula is * (Output Frequency) = CLKIN * ((M + 1) / (N + 1)) / (P + 1) * M - Numerator * N - Denumerator * P - Post Divider * They have the same layout in their control register. * * D-PLL and D2-PLL have extra divider (OD + 1), which is not * yet needed and ignored by clock configurations. */ union ast2600_pll_reg { uint32_t w; struct { unsigned int m : 13; unsigned int n : 6; unsigned int p : 4; unsigned int off : 1; unsigned int bypass : 1; unsigned int reset : 1; unsigned int reserved : 6; } b; }; struct ast2600_pll_cfg { union ast2600_pll_reg reg; unsigned int ext_reg; }; struct ast2600_pll_desc { uint32_t in; uint32_t out; struct ast2600_pll_cfg cfg; }; static const struct ast2600_pll_desc ast2600_pll_lookup[] = { { .in = CLKIN_25M, .out = 400000000, .cfg.reg.b.m = 95, .cfg.reg.b.n = 2, .cfg.reg.b.p = 1, .cfg.ext_reg = 0x31, }, { .in = CLKIN_25M, .out = 200000000, .cfg.reg.b.m = 127, .cfg.reg.b.n = 0, .cfg.reg.b.p = 15, .cfg.ext_reg = 0x3f, }, { .in = CLKIN_25M, .out = 334000000, .cfg.reg.b.m = 667, .cfg.reg.b.n = 4, .cfg.reg.b.p = 9, .cfg.ext_reg = 0x14d, }, { .in = CLKIN_25M, .out = 1000000000, .cfg.reg.b.m = 119, .cfg.reg.b.n = 2, .cfg.reg.b.p = 0, .cfg.ext_reg = 0x3d, }, { .in = CLKIN_25M, .out = 50000000, .cfg.reg.b.m = 95, .cfg.reg.b.n = 2, .cfg.reg.b.p = 15, .cfg.ext_reg = 0x31, }, }; /* divisor tables */ static uint32_t axi_ahb_div0_table[] = { 3, 2, 3, 4, }; static uint32_t axi_ahb_div1_table[] = { 3, 4, 6, 8, }; static uint32_t axi_ahb_default_table[] = { 3, 4, 3, 4, 2, 2, 2, 2, }; extern uint32_t ast2600_get_pll_rate(struct ast2600_scu *scu, int pll_idx) { union ast2600_pll_reg pll_reg; uint32_t hwstrap1; uint32_t cpu_freq; uint32_t mul = 1, div = 1; switch (pll_idx) { case ASPEED_CLK_APLL: pll_reg.w = readl(&scu->apll); break; case ASPEED_CLK_DPLL: pll_reg.w = readl(&scu->dpll); break; case ASPEED_CLK_EPLL: pll_reg.w = readl(&scu->epll); break; case ASPEED_CLK_HPLL: pll_reg.w = readl(&scu->hpll); break; case ASPEED_CLK_MPLL: pll_reg.w = readl(&scu->mpll); break; } if (!pll_reg.b.bypass) { /* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1) * HPLL Numerator (M) = fix 0x5F when SCU500[10]=1 * Fixed 0xBF when SCU500[10]=0 and SCU500[8]=1 * SCU200[12:0] (default 0x8F) when SCU510[10]=0 and SCU510[8]=0 * HPLL Denumerator (N) = SCU200[18:13] (default 0x2) * HPLL Divider (P) = SCU200[22:19] (default 0x0) * HPLL Bandwidth Adj (NB) = fix 0x2F when SCU500[10]=1 * Fixed 0x5F when SCU500[10]=0 and SCU500[8]=1 * SCU204[11:0] (default 0x31) when SCU500[10]=0 and SCU500[8]=0 */ if (pll_idx == ASPEED_CLK_HPLL) { hwstrap1 = readl(&scu->hwstrap1); cpu_freq = (hwstrap1 & SCU_HWSTRAP1_CPU_FREQ_MASK) >> SCU_HWSTRAP1_CPU_FREQ_SHIFT; switch (cpu_freq) { case CPU_FREQ_800M_1: case CPU_FREQ_800M_2: case CPU_FREQ_800M_3: case CPU_FREQ_800M_4: pll_reg.b.m = 0x5f; break; case CPU_FREQ_1600M_1: case CPU_FREQ_1600M_2: pll_reg.b.m = 0xbf; break; default: pll_reg.b.m = 0x8f; break; } } mul = (pll_reg.b.m + 1) / (pll_reg.b.n + 1); div = (pll_reg.b.p + 1); } return ((CLKIN_25M * mul) / div); } static uint32_t ast2600_get_hclk_rate(struct ast2600_scu *scu) { uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL); uint32_t axi_div, ahb_div; uint32_t hwstrap1 = readl(&scu->hwstrap1); uint32_t cpu_freq = (hwstrap1 & SCU_HWSTRAP1_CPU_FREQ_MASK) >> SCU_HWSTRAP1_CPU_FREQ_SHIFT; uint32_t axi_ahb_ratio = (hwstrap1 & SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_MASK) >> SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_SHIFT; if (hwstrap1 & SCU_HWSTRAP1_CPU_AXI_CLK_RATIO) { axi_ahb_div1_table[0] = axi_ahb_default_table[cpu_freq] * 2; axi_div = 1; ahb_div = axi_ahb_div1_table[axi_ahb_ratio]; } else { axi_ahb_div0_table[0] = axi_ahb_default_table[cpu_freq]; axi_div = 2; ahb_div = axi_ahb_div0_table[axi_ahb_ratio]; } return (rate / axi_div / ahb_div); } static uint32_t ast2600_get_bclk_rate(struct ast2600_scu *scu) { uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL); uint32_t clksrc1 = readl(&scu->clksrc1); uint32_t bclk_div = (clksrc1 & SCU_CLKSRC1_BCLK_DIV_MASK) >> SCU_CLKSRC1_BCLK_DIV_SHIFT; return (rate / ((bclk_div + 1) * 4)); } static uint32_t ast2600_get_pclk1_rate(struct ast2600_scu *scu) { uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL); uint32_t clksrc1 = readl(&scu->clksrc1); uint32_t pclk_div = (clksrc1 & SCU_CLKSRC1_PCLK_DIV_MASK) >> SCU_CLKSRC1_PCLK_DIV_SHIFT; return (rate / ((pclk_div + 1) * 4)); } static uint32_t ast2600_get_pclk2_rate(struct ast2600_scu *scu) { uint32_t rate = ast2600_get_hclk_rate(scu); uint32_t clksrc4 = readl(&scu->clksrc4); uint32_t pclk_div = (clksrc4 & SCU_CLKSRC4_PCLK_DIV_MASK) >> SCU_CLKSRC4_PCLK_DIV_SHIFT; return (rate / ((pclk_div + 1) * 2)); } static uint32_t ast2600_get_uxclk_in_rate(struct ast2600_scu *scu) { uint32_t rate = 0; uint32_t clksrc5 = readl(&scu->clksrc5); uint32_t uxclk = (clksrc5 & SCU_CLKSRC5_UXCLK_MASK) >> SCU_CLKSRC5_UXCLK_SHIFT; switch (uxclk) { case 0: rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 4; break; case 1: rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 2; break; case 2: rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL); break; case 3: rate = ast2600_get_hclk_rate(scu); break; } return rate; } static uint32_t ast2600_get_huxclk_in_rate(struct ast2600_scu *scu) { uint32_t rate = 0; uint32_t clksrc5 = readl(&scu->clksrc5); uint32_t huxclk = (clksrc5 & SCU_CLKSRC5_HUXCLK_MASK) >> SCU_CLKSRC5_HUXCLK_SHIFT; switch (huxclk) { case 0: rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 4; break; case 1: rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 2; break; case 2: rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL); break; case 3: rate = ast2600_get_hclk_rate(scu); break; } return rate; } static uint32_t ast2600_get_uart_uxclk_rate(struct ast2600_scu *scu) { uint32_t rate = ast2600_get_uxclk_in_rate(scu); uint32_t uart_clkgen = readl(&scu->uart_clkgen); uint32_t n = (uart_clkgen & SCU_UART_CLKGEN_N_MASK) >> SCU_UART_CLKGEN_N_SHIFT; uint32_t r = (uart_clkgen & SCU_UART_CLKGEN_R_MASK) >> SCU_UART_CLKGEN_R_SHIFT; return ((rate * r) / (n * 2)); } static uint32_t ast2600_get_uart_huxclk_rate(struct ast2600_scu *scu) { uint32_t rate = ast2600_get_huxclk_in_rate(scu); uint32_t huart_clkgen = readl(&scu->huart_clkgen); uint32_t n = (huart_clkgen & SCU_HUART_CLKGEN_N_MASK) >> SCU_HUART_CLKGEN_N_SHIFT; uint32_t r = (huart_clkgen & SCU_HUART_CLKGEN_R_MASK) >> SCU_HUART_CLKGEN_R_SHIFT; return ((rate * r) / (n * 2)); } static uint32_t ast2600_get_sdio_clk_rate(struct ast2600_scu *scu) { uint32_t rate = 0; uint32_t clksrc4 = readl(&scu->clksrc4); uint32_t sdio_div = (clksrc4 & SCU_CLKSRC4_SDIO_DIV_MASK) >> SCU_CLKSRC4_SDIO_DIV_SHIFT; if (clksrc4 & SCU_CLKSRC4_SDIO) rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL); else rate = ast2600_get_hclk_rate(scu); return (rate / ((sdio_div + 1) * 2)); } static uint32_t ast2600_get_emmc_clk_rate(struct ast2600_scu *scu) { uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL); uint32_t clksrc1 = readl(&scu->clksrc1); uint32_t emmc_div = (clksrc1 & SCU_CLKSRC1_EMMC_DIV_MASK) >> SCU_CLKSRC1_EMMC_DIV_SHIFT; return (rate / ((emmc_div + 1) * 4)); } static uint32_t ast2600_get_uart_clk_rate(struct ast2600_scu *scu, int uart_idx) { uint32_t rate = 0; uint32_t uart5_clk = 0; uint32_t clksrc2 = readl(&scu->clksrc2); uint32_t clksrc4 = readl(&scu->clksrc4); uint32_t clksrc5 = readl(&scu->clksrc5); uint32_t misc_ctrl1 = readl(&scu->misc_ctrl1); switch (uart_idx) { case 1: case 2: case 3: case 4: case 6: if (clksrc4 & BIT(uart_idx - 1)) rate = ast2600_get_uart_huxclk_rate(scu); else rate = ast2600_get_uart_uxclk_rate(scu); break; case 5: /* * SCU0C[12] and SCU304[14] together decide * the UART5 clock generation */ if (misc_ctrl1 & SCU_MISC_CTRL1_UART5_DIV) uart5_clk = 0x1 << 1; if (clksrc2 & SCU_CLKSRC2_UART5) uart5_clk |= 0x1; switch (uart5_clk) { case 0: rate = 24000000; break; case 1: rate = 192000000; break; case 2: rate = 24000000 / 13; break; case 3: rate = 192000000 / 13; break; } break; case 7: case 8: case 9: case 10: case 11: case 12: case 13: if (clksrc5 & BIT(uart_idx - 1)) rate = ast2600_get_uart_huxclk_rate(scu); else rate = ast2600_get_uart_uxclk_rate(scu); break; } return rate; } static ulong ast2600_clk_get_rate(struct clk *clk) { struct ast2600_clk_priv *priv = dev_get_priv(clk->dev); ulong rate = 0; switch (clk->id) { case ASPEED_CLK_HPLL: case ASPEED_CLK_EPLL: case ASPEED_CLK_DPLL: case ASPEED_CLK_MPLL: case ASPEED_CLK_APLL: rate = ast2600_get_pll_rate(priv->scu, clk->id); break; case ASPEED_CLK_AHB: rate = ast2600_get_hclk_rate(priv->scu); break; case ASPEED_CLK_APB1: rate = ast2600_get_pclk1_rate(priv->scu); break; case ASPEED_CLK_APB2: rate = ast2600_get_pclk2_rate(priv->scu); break; case ASPEED_CLK_GATE_UART1CLK: rate = ast2600_get_uart_clk_rate(priv->scu, 1); break; case ASPEED_CLK_GATE_UART2CLK: rate = ast2600_get_uart_clk_rate(priv->scu, 2); break; case ASPEED_CLK_GATE_UART3CLK: rate = ast2600_get_uart_clk_rate(priv->scu, 3); break; case ASPEED_CLK_GATE_UART4CLK: rate = ast2600_get_uart_clk_rate(priv->scu, 4); break; case ASPEED_CLK_GATE_UART5CLK: rate = ast2600_get_uart_clk_rate(priv->scu, 5); break; case ASPEED_CLK_BCLK: rate = ast2600_get_bclk_rate(priv->scu); break; case ASPEED_CLK_SDIO: rate = ast2600_get_sdio_clk_rate(priv->scu); break; case ASPEED_CLK_EMMC: rate = ast2600_get_emmc_clk_rate(priv->scu); break; case ASPEED_CLK_UARTX: rate = ast2600_get_uart_uxclk_rate(priv->scu); break; case ASPEED_CLK_HUARTX: rate = ast2600_get_uart_huxclk_rate(priv->scu); break; default: debug("can't get clk rate\n"); return -ENOENT; } return rate; } /** * @brief lookup PLL divider config by input/output rate * @param[in] *pll - PLL descriptor * @return true - if PLL divider config is found, false - else * The function caller shall fill "pll->in" and "pll->out", * then this function will search the lookup table * to find a valid PLL divider configuration. */ static bool ast2600_search_clock_config(struct ast2600_pll_desc *pll) { uint32_t i; const struct ast2600_pll_desc *def_desc; bool is_found = false; for (i = 0; i < ARRAY_SIZE(ast2600_pll_lookup); i++) { def_desc = &ast2600_pll_lookup[i]; if (def_desc->in == pll->in && def_desc->out == pll->out) { is_found = true; pll->cfg.reg.w = def_desc->cfg.reg.w; pll->cfg.ext_reg = def_desc->cfg.ext_reg; break; } } return is_found; } static uint32_t ast2600_configure_pll(struct ast2600_scu *scu, struct ast2600_pll_cfg *p_cfg, int pll_idx) { uint32_t addr, addr_ext; uint32_t reg; switch (pll_idx) { case ASPEED_CLK_HPLL: addr = (uint32_t)(&scu->hpll); addr_ext = (uint32_t)(&scu->hpll_ext); break; case ASPEED_CLK_MPLL: addr = (uint32_t)(&scu->mpll); addr_ext = (uint32_t)(&scu->mpll_ext); break; case ASPEED_CLK_DPLL: addr = (uint32_t)(&scu->dpll); addr_ext = (uint32_t)(&scu->dpll_ext); break; case ASPEED_CLK_EPLL: addr = (uint32_t)(&scu->epll); addr_ext = (uint32_t)(&scu->epll_ext); break; case ASPEED_CLK_APLL: addr = (uint32_t)(&scu->apll); addr_ext = (uint32_t)(&scu->apll_ext); break; default: debug("unknown PLL index\n"); return 1; } p_cfg->reg.b.bypass = 0; p_cfg->reg.b.off = 1; p_cfg->reg.b.reset = 1; reg = readl(addr); reg &= ~GENMASK(25, 0); reg |= p_cfg->reg.w; writel(reg, addr); /* write extend parameter */ writel(p_cfg->ext_reg, addr_ext); udelay(100); p_cfg->reg.b.off = 0; p_cfg->reg.b.reset = 0; reg &= ~GENMASK(25, 0); reg |= p_cfg->reg.w; writel(reg, addr); while (!(readl(addr_ext) & BIT(31))) ; return 0; } static uint32_t ast2600_configure_ddr(struct ast2600_scu *scu, ulong rate) { struct ast2600_pll_desc mpll; mpll.in = CLKIN_25M; mpll.out = rate; if (ast2600_search_clock_config(&mpll) == false) { printf("error!! unable to find valid DDR clock setting\n"); return 0; } ast2600_configure_pll(scu, &mpll.cfg, ASPEED_CLK_MPLL); return ast2600_get_pll_rate(scu, ASPEED_CLK_MPLL); } static ulong ast2600_clk_set_rate(struct clk *clk, ulong rate) { struct ast2600_clk_priv *priv = dev_get_priv(clk->dev); ulong new_rate; switch (clk->id) { case ASPEED_CLK_MPLL: new_rate = ast2600_configure_ddr(priv->scu, rate); break; default: return -ENOENT; } return new_rate; } static uint32_t ast2600_configure_mac12_clk(struct ast2600_scu *scu) { /* scu340[25:0]: 1G default delay */ clrsetbits_le32(&scu->mac12_clk_delay, GENMASK(25, 0), MAC12_DEF_DELAY_1G); /* set 100M/10M default delay */ writel(MAC12_DEF_DELAY_100M, &scu->mac12_clk_delay_100M); writel(MAC12_DEF_DELAY_10M, &scu->mac12_clk_delay_10M); /* MAC AHB = HPLL / 6 */ clrsetbits_le32(&scu->clksrc1, SCU_CLKSRC1_MAC_DIV_MASK, (0x2 << SCU_CLKSRC1_MAC_DIV_SHIFT)); return 0; } static uint32_t ast2600_configure_mac34_clk(struct ast2600_scu *scu) { /* * scu350[31] RGMII 125M source: 0 = from IO pin * scu350[25:0] MAC 1G delay */ clrsetbits_le32(&scu->mac34_clk_delay, (BIT(31) | GENMASK(25, 0)), MAC34_DEF_DELAY_1G); writel(MAC34_DEF_DELAY_100M, &scu->mac34_clk_delay_100M); writel(MAC34_DEF_DELAY_10M, &scu->mac34_clk_delay_10M); /* * clock source seletion and divider * scu310[26:24] : MAC AHB bus clock = HCLK / 2 * scu310[18:16] : RMII 50M = HCLK_200M / 4 */ clrsetbits_le32(&scu->clksrc4, (SCU_CLKSRC4_MAC_DIV_MASK | SCU_CLKSRC4_RMII34_DIV_MASK), ((0x0 << SCU_CLKSRC4_MAC_DIV_SHIFT) | (0x3 << SCU_CLKSRC4_RMII34_DIV_SHIFT))); /* * set driving strength * scu458[3:2] : MAC4 driving strength * scu458[1:0] : MAC3 driving strength */ clrsetbits_le32(&scu->pinmux16, SCU_PINCTRL16_MAC4_DRIVING_MASK | SCU_PINCTRL16_MAC3_DRIVING_MASK, (0x3 << SCU_PINCTRL16_MAC4_DRIVING_SHIFT) | (0x3 << SCU_PINCTRL16_MAC3_DRIVING_SHIFT)); return 0; } /** * ast2600 RGMII clock source tree * 125M from external PAD -------->|\ * HPLL -->|\ | |---->RGMII 125M for MAC#1 & MAC#2 * | |---->| divider |---->|/ + * EPLL -->|/ | * | * +---------<-----------|RGMIICK PAD output enable|<-------------+ * | * +--------------------------->|\ * | |----> RGMII 125M for MAC#3 & MAC#4 * HCLK 200M ---->|divider|---->|/ * To simplify the control flow: * 1. RGMII 1/2 always use EPLL as the internal clock source * 2. RGMII 3/4 always use RGMIICK pad as the RGMII 125M source * 125M from external PAD -------->|\ * | |---->RGMII 125M for MAC#1 & MAC#2 * EPLL---->| divider |--->|/ + * | * +<--------------------|RGMIICK PAD output enable|<-------------+ * | * +--------------------------->RGMII 125M for MAC#3 & MAC#4 */ #define RGMIICK_SRC_PAD 0 #define RGMIICK_SRC_EPLL 1 /* recommended */ #define RGMIICK_SRC_HPLL 2 #define RGMIICK_DIV2 1 #define RGMIICK_DIV3 2 #define RGMIICK_DIV4 3 #define RGMIICK_DIV5 4 #define RGMIICK_DIV6 5 #define RGMIICK_DIV7 6 #define RGMIICK_DIV8 7 /* recommended */ #define RMIICK_DIV4 0 #define RMIICK_DIV8 1 #define RMIICK_DIV12 2 #define RMIICK_DIV16 3 #define RMIICK_DIV20 4 /* recommended */ #define RMIICK_DIV24 5 #define RMIICK_DIV28 6 #define RMIICK_DIV32 7 struct ast2600_mac_clk_div { uint32_t src; /* 0=external PAD, 1=internal PLL */ uint32_t fin; /* divider input speed */ uint32_t n; /* 0=div2, 1=div2, 2=div3, 3=div4,...,7=div8 */ uint32_t fout; /* fout = fin / n */ }; struct ast2600_mac_clk_div rgmii_clk_defconfig = { .src = ASPEED_CLK_EPLL, .fin = 1000000000, .n = RGMIICK_DIV8, .fout = 125000000, }; struct ast2600_mac_clk_div rmii_clk_defconfig = { .src = ASPEED_CLK_EPLL, .fin = 1000000000, .n = RMIICK_DIV20, .fout = 50000000, }; static void ast2600_init_mac_pll(struct ast2600_scu *p_scu, struct ast2600_mac_clk_div *p_cfg) { struct ast2600_pll_desc pll; pll.in = CLKIN_25M; pll.out = p_cfg->fin; if (ast2600_search_clock_config(&pll) == false) { pr_err("unable to find valid ETHNET MAC clock setting\n"); return; } ast2600_configure_pll(p_scu, &pll.cfg, p_cfg->src); } static void ast2600_init_rgmii_clk(struct ast2600_scu *p_scu, struct ast2600_mac_clk_div *p_cfg) { uint32_t reg_304 = readl(&p_scu->clksrc2); uint32_t reg_340 = readl(&p_scu->mac12_clk_delay); uint32_t reg_350 = readl(&p_scu->mac34_clk_delay); reg_340 &= ~GENMASK(31, 29); /* scu340[28]: RGMIICK PAD output enable (to MAC 3/4) */ reg_340 |= BIT(28); if (p_cfg->src == ASPEED_CLK_EPLL || p_cfg->src == ASPEED_CLK_HPLL) { /* * re-init PLL if the current PLL output frequency doesn't match * the divider setting */ if (p_cfg->fin != ast2600_get_pll_rate(p_scu, p_cfg->src)) ast2600_init_mac_pll(p_scu, p_cfg); /* scu340[31]: select RGMII 125M from internal source */ reg_340 |= BIT(31); } reg_304 &= ~GENMASK(23, 20); /* set clock divider */ reg_304 |= (p_cfg->n & 0x7) << 20; /* select internal clock source */ if (p_cfg->src == ASPEED_CLK_HPLL) reg_304 |= BIT(23); /* RGMII 3/4 clock source select */ reg_350 &= ~BIT(31); writel(reg_304, &p_scu->clksrc2); writel(reg_340, &p_scu->mac12_clk_delay); writel(reg_350, &p_scu->mac34_clk_delay); } /** * ast2600 RMII/NCSI clock source tree * HPLL -->|\ * | |---->| divider |----> RMII 50M for MAC#1 & MAC#2 * EPLL -->|/ * HCLK(SCLICLK)---->| divider |----> RMII 50M for MAC#3 & MAC#4 */ static void ast2600_init_rmii_clk(struct ast2600_scu *p_scu, struct ast2600_mac_clk_div *p_cfg) { uint32_t clksrc2 = readl(&p_scu->clksrc2); uint32_t clksrc4 = readl(&p_scu->clksrc4); if (p_cfg->src == ASPEED_CLK_EPLL || p_cfg->src == ASPEED_CLK_HPLL) { /* * re-init PLL if the current PLL output frequency doesn't match * the divider setting */ if (p_cfg->fin != ast2600_get_pll_rate(p_scu, p_cfg->src)) ast2600_init_mac_pll(p_scu, p_cfg); } clksrc2 &= ~(SCU_CLKSRC2_RMII12 | SCU_CLKSRC2_RMII12_DIV_MASK); /* set RMII 1/2 clock divider */ clksrc2 |= (p_cfg->n & 0x7) << 16; /* RMII clock source selection */ if (p_cfg->src == ASPEED_CLK_HPLL) clksrc2 |= SCU_CLKSRC2_RMII12; /* set RMII 3/4 clock divider */ clksrc4 &= ~SCU_CLKSRC4_RMII34_DIV_MASK; clksrc4 |= (0x3 << SCU_CLKSRC4_RMII34_DIV_SHIFT); writel(clksrc2, &p_scu->clksrc2); writel(clksrc4, &p_scu->clksrc4); } static uint32_t ast2600_configure_mac(struct ast2600_scu *scu, int index) { uint32_t reset_bit; uint32_t clkgate_bit; switch (index) { case 1: reset_bit = BIT(ASPEED_RESET_MAC1); clkgate_bit = SCU_CLKGATE1_MAC1; writel(reset_bit, &scu->modrst_ctrl1); udelay(100); writel(clkgate_bit, &scu->clkgate_clr1); mdelay(10); writel(reset_bit, &scu->modrst_clr1); break; case 2: reset_bit = BIT(ASPEED_RESET_MAC2); clkgate_bit = SCU_CLKGATE1_MAC2; writel(reset_bit, &scu->modrst_ctrl1); udelay(100); writel(clkgate_bit, &scu->clkgate_clr1); mdelay(10); writel(reset_bit, &scu->modrst_clr1); break; case 3: reset_bit = BIT(ASPEED_RESET_MAC3 - 32); clkgate_bit = SCU_CLKGATE2_MAC3; writel(reset_bit, &scu->modrst_ctrl2); udelay(100); writel(clkgate_bit, &scu->clkgate_clr2); mdelay(10); writel(reset_bit, &scu->modrst_clr2); break; case 4: reset_bit = BIT(ASPEED_RESET_MAC4 - 32); clkgate_bit = SCU_CLKGATE2_MAC4; writel(reset_bit, &scu->modrst_ctrl2); udelay(100); writel(clkgate_bit, &scu->clkgate_clr2); mdelay(10); writel(reset_bit, &scu->modrst_clr2); break; default: return -EINVAL; } return 0; } static void ast2600_configure_rsa_ecc_clk(struct ast2600_scu *scu) { uint32_t clksrc1 = readl(&scu->clksrc1); /* Configure RSA clock = HPLL/3 */ clksrc1 |= SCU_CLKSRC1_ECC_RSA; clksrc1 &= ~SCU_CLKSRC1_ECC_RSA_DIV_MASK; clksrc1 |= (2 << SCU_CLKSRC1_ECC_RSA_DIV_SHIFT); writel(clksrc1, &scu->clksrc1); } static ulong ast2600_enable_sdclk(struct ast2600_scu *scu) { uint32_t reset_bit; uint32_t clkgate_bit; reset_bit = BIT(ASPEED_RESET_SD - 32); clkgate_bit = SCU_CLKGATE2_SDIO; writel(reset_bit, &scu->modrst_ctrl2); udelay(100); writel(clkgate_bit, &scu->clkgate_clr2); mdelay(10); writel(reset_bit, &scu->modrst_clr2); return 0; } static ulong ast2600_enable_extsdclk(struct ast2600_scu *scu) { int i = 0; uint32_t div = 0; uint32_t rate = 0; uint32_t clksrc4 = readl(&scu->clksrc4); /* * ast2600 SD controller max clk is 200Mhz * use apll for clock source 800/4 = 200 * controller max is 200mhz */ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL); for (i = 0; i < 8; i++) { div = (i + 1) * 2; if ((rate / div) <= 200000000) break; } clksrc4 &= ~SCU_CLKSRC4_SDIO_DIV_MASK; clksrc4 |= (i << SCU_CLKSRC4_SDIO_DIV_SHIFT); clksrc4 |= SCU_CLKSRC4_SDIO; writel(clksrc4, &scu->clksrc4); setbits_le32(&scu->clksrc4, SCU_CLKSRC4_SDIO_EN); return 0; } static ulong ast2600_enable_emmcclk(struct ast2600_scu *scu) { uint32_t reset_bit; uint32_t clkgate_bit; reset_bit = BIT(ASPEED_RESET_EMMC); clkgate_bit = SCU_CLKGATE1_EMMC; writel(reset_bit, &scu->modrst_ctrl1); udelay(100); writel(clkgate_bit, &scu->clkgate_clr1); mdelay(10); writel(reset_bit, &scu->modrst_clr1); return 0; } static ulong ast2600_enable_extemmcclk(struct ast2600_scu *scu) { int i = 0; uint32_t div = 0; uint32_t rate = 0; uint32_t clksrc1 = readl(&scu->clksrc1); /* * ast2600 eMMC controller max clk is 200Mhz * HPll->1/2->|\ * |->SCU300[11]->SCU300[14:12][1/N] + * MPLL------>|/ | * +----------------------------------------------+ * | * +---------> EMMC12C[15:8][1/N]-> eMMC clk */ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_MPLL); for (i = 0; i < 8; i++) { div = (i + 1) * 2; if ((rate / div) <= 200000000) break; } clksrc1 &= ~SCU_CLKSRC1_EMMC_DIV_MASK; clksrc1 |= (i << SCU_CLKSRC1_EMMC_DIV_SHIFT); clksrc1 |= SCU_CLKSRC1_EMMC; writel(clksrc1, &scu->clksrc1); setbits_le32(&scu->clksrc1, SCU_CLKSRC1_EMMC_EN); return 0; } static ulong ast2600_enable_fsiclk(struct ast2600_scu *scu) { uint32_t reset_bit; uint32_t clkgate_bit; reset_bit = BIT(ASPEED_RESET_FSI % 32); clkgate_bit = SCU_CLKGATE2_FSI; /* The FSI clock is shared between masters. If it's already on * don't touch it, as that will reset the existing master. */ if (!(readl(&scu->clkgate_ctrl2) & clkgate_bit)) { debug("%s: already running, not touching it\n", __func__); return 0; } writel(reset_bit, &scu->modrst_ctrl2); udelay(100); writel(clkgate_bit, &scu->clkgate_clr2); mdelay(10); writel(reset_bit, &scu->modrst_clr2); return 0; } static ulong ast2600_enable_usbahclk(struct ast2600_scu *scu) { uint32_t reset_bit; uint32_t clkgate_bit; reset_bit = BIT(ASPEED_RESET_EHCI_P1); clkgate_bit = SCU_CLKGATE1_USB_HUB; writel(reset_bit, &scu->modrst_ctrl1); udelay(100); writel(clkgate_bit, &scu->clkgate_ctrl1); mdelay(20); writel(reset_bit, &scu->modrst_clr1); return 0; } static ulong ast2600_enable_usbbhclk(struct ast2600_scu *scu) { uint32_t reset_bit; uint32_t clkgate_bit; reset_bit = BIT(ASPEED_RESET_EHCI_P2); clkgate_bit = SCU_CLKGATE1_USB_HOST2; writel(reset_bit, &scu->modrst_ctrl1); udelay(100); writel(clkgate_bit, &scu->clkgate_clr1); mdelay(20); writel(reset_bit, &scu->modrst_clr1); return 0; } static ulong ast2600_enable_haceclk(struct ast2600_scu *scu) { uint32_t reset_bit; uint32_t clkgate_bit; /* share the same reset control bit with ACRY */ reset_bit = BIT(ASPEED_RESET_HACE); clkgate_bit = SCU_CLKGATE1_HACE; /* * we don't do reset assertion here as HACE * shares the same reset control with ACRY */ writel(clkgate_bit, &scu->clkgate_clr1); mdelay(20); writel(reset_bit, &scu->modrst_clr1); return 0; } static ulong ast2600_enable_rsaclk(struct ast2600_scu *scu) { uint32_t reset_bit; uint32_t clkgate_bit; /* same reset control bit with HACE */ reset_bit = BIT(ASPEED_RESET_HACE); clkgate_bit = SCU_CLKGATE1_ACRY; /* * we don't do reset assertion here as HACE * shares the same reset control with ACRY */ writel(clkgate_bit, &scu->clkgate_clr1); mdelay(20); writel(reset_bit, &scu->modrst_clr1); return 0; } static int ast2600_clk_enable(struct clk *clk) { struct ast2600_clk_priv *priv = dev_get_priv(clk->dev); switch (clk->id) { case ASPEED_CLK_GATE_MAC1CLK: ast2600_configure_mac(priv->scu, 1); break; case ASPEED_CLK_GATE_MAC2CLK: ast2600_configure_mac(priv->scu, 2); break; case ASPEED_CLK_GATE_MAC3CLK: ast2600_configure_mac(priv->scu, 3); break; case ASPEED_CLK_GATE_MAC4CLK: ast2600_configure_mac(priv->scu, 4); break; case ASPEED_CLK_GATE_SDCLK: ast2600_enable_sdclk(priv->scu); break; case ASPEED_CLK_GATE_SDEXTCLK: ast2600_enable_extsdclk(priv->scu); break; case ASPEED_CLK_GATE_EMMCCLK: ast2600_enable_emmcclk(priv->scu); break; case ASPEED_CLK_GATE_EMMCEXTCLK: ast2600_enable_extemmcclk(priv->scu); break; case ASPEED_CLK_GATE_FSICLK: ast2600_enable_fsiclk(priv->scu); break; case ASPEED_CLK_GATE_USBPORT1CLK: ast2600_enable_usbahclk(priv->scu); break; case ASPEED_CLK_GATE_USBPORT2CLK: ast2600_enable_usbbhclk(priv->scu); break; case ASPEED_CLK_GATE_YCLK: ast2600_enable_haceclk(priv->scu); break; case ASPEED_CLK_GATE_RSACLK: ast2600_enable_rsaclk(priv->scu); break; default: pr_err("can't enable clk\n"); return -ENOENT; } return 0; } struct clk_ops ast2600_clk_ops = { .get_rate = ast2600_clk_get_rate, .set_rate = ast2600_clk_set_rate, .enable = ast2600_clk_enable, }; static int ast2600_clk_probe(struct udevice *dev) { struct ast2600_clk_priv *priv = dev_get_priv(dev); priv->scu = devfdt_get_addr_ptr(dev); if (IS_ERR(priv->scu)) return PTR_ERR(priv->scu); ast2600_init_rgmii_clk(priv->scu, &rgmii_clk_defconfig); ast2600_init_rmii_clk(priv->scu, &rmii_clk_defconfig); ast2600_configure_mac12_clk(priv->scu); ast2600_configure_mac34_clk(priv->scu); ast2600_configure_rsa_ecc_clk(priv->scu); return 0; } static int ast2600_clk_bind(struct udevice *dev) { int ret; /* The reset driver does not have a device node, so bind it here */ ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev); if (ret) debug("Warning: No reset driver: ret=%d\n", ret); return 0; } struct aspeed_clks { ulong id; const char *name; }; static struct aspeed_clks aspeed_clk_names[] = { { ASPEED_CLK_HPLL, "hpll" }, { ASPEED_CLK_MPLL, "mpll" }, { ASPEED_CLK_APLL, "apll" }, { ASPEED_CLK_EPLL, "epll" }, { ASPEED_CLK_DPLL, "dpll" }, { ASPEED_CLK_AHB, "hclk" }, { ASPEED_CLK_APB1, "pclk1" }, { ASPEED_CLK_APB2, "pclk2" }, { ASPEED_CLK_BCLK, "bclk" }, { ASPEED_CLK_UARTX, "uxclk" }, { ASPEED_CLK_HUARTX, "huxclk" }, }; int soc_clk_dump(void) { struct udevice *dev; struct clk clk; unsigned long rate; int i, ret; ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(aspeed_scu), &dev); if (ret) return ret; printf("Clk\t\tHz\n"); for (i = 0; i < ARRAY_SIZE(aspeed_clk_names); i++) { clk.id = aspeed_clk_names[i].id; ret = clk_request(dev, &clk); if (ret < 0) { debug("%s clk_request() failed: %d\n", __func__, ret); continue; } ret = clk_get_rate(&clk); rate = ret; clk_free(&clk); if (ret == -EINVAL) { printf("clk ID %lu not supported yet\n", aspeed_clk_names[i].id); continue; } if (ret < 0) { printf("%s %lu: get_rate err: %d\n", __func__, aspeed_clk_names[i].id, ret); continue; } printf("%s(%3lu):\t%lu\n", aspeed_clk_names[i].name, aspeed_clk_names[i].id, rate); } return 0; } static const struct udevice_id ast2600_clk_ids[] = { { .compatible = "aspeed,ast2600-scu", }, { }, }; U_BOOT_DRIVER(aspeed_ast2600_scu) = { .name = "aspeed_ast2600_scu", .id = UCLASS_CLK, .of_match = ast2600_clk_ids, .priv_auto = sizeof(struct ast2600_clk_priv), .ops = &ast2600_clk_ops, .bind = ast2600_clk_bind, .probe = ast2600_clk_probe, };