/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2017, 2019-2021 NXP * Copyright 2015 Freescale Semiconductor */ #ifndef __LS2_QDS_H #define __LS2_QDS_H #include "ls2080a_common.h" #ifdef CONFIG_FSL_QSPI #define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_I2C_IFDR_DIV 0x7e #endif #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS3 0x53 #define SPD_EEPROM_ADDRESS4 0x54 #define SPD_EEPROM_ADDRESS5 0x55 #define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 #endif /* SATA */ #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 #define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) #define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) #define CONFIG_SYS_NOR0_CSPR \ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) #define CONFIG_SYS_NOR0_CSPR_EARLY \ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) #define CONFIG_SYS_NOR1_CSPR \ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) #define CONFIG_SYS_NOR1_CSPR_EARLY \ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12) #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ FTIM0_NOR_TEADC(0x5) | \ FTIM0_NOR_TEAHC(0x5)) #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ FTIM1_NOR_TRAD_NOR(0x1a) |\ FTIM1_NOR_TSEQRAD_NOR(0x13)) #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ FTIM2_NOR_TCH(0x4) | \ FTIM2_NOR_TWPH(0x0E) | \ FTIM2_NOR_TWP(0x1c)) #define CONFIG_SYS_NOR_FTIM3 0x04000000 #define CONFIG_SYS_IFC_CCR 0x01000000 #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ CONFIG_SYS_FLASH_BASE + 0x40000000} #endif #define CONFIG_SYS_NAND_MAX_ECCPOS 256 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 #define CONFIG_SYS_NAND_CSPR_EXT (0x0) #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | CSPR_MSEL_NAND /* MSEL = NAND */ \ | CSPR_V) #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ /* ONFI NAND Flash mode0 Timing Params */ #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ FTIM0_NAND_TWP(0x18) | \ FTIM0_NAND_TWCHT(0x07) | \ FTIM0_NAND_TWH(0x0a)) #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ FTIM1_NAND_TWBE(0x39) | \ FTIM1_NAND_TRR(0x0e) | \ FTIM1_NAND_TRP(0x18)) #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ FTIM2_NAND_TREH(0x0a) | \ FTIM2_NAND_TWHRE(0x1e)) #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f #define QIXIS_LBMAP_SHIFT 0 #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 #define QIXIS_LBMAP_NAND 0x09 #define QIXIS_LBMAP_SD 0x00 #define QIXIS_LBMAP_QSPI 0x0f #define QIXIS_RST_CTL_RESET 0x31 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 #define QIXIS_RCW_SRC_NAND 0x107 #define QIXIS_RCW_SRC_SD 0x40 #define QIXIS_RCW_SRC_QSPI 0x62 #define QIXIS_RST_FORCE_MEM 0x01 #define CONFIG_SYS_CSPR3_EXT (0x0) #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) #define CONFIG_SYS_CSPR3_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) #define CONFIG_SYS_CSOR3 CSOR_GPCM_ADM_SHIFT(12) /* QIXIS Timing parameters for IFC CS3 */ #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ FTIM2_GPCM_TCH(0xf) | \ FTIM2_GPCM_TWP(0x3E)) #define CONFIG_SYS_CS3_FTIM3 0x0 #if defined(CONFIG_SPL) #if defined(CONFIG_NAND_BOOT) #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR_EARLY #define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR0_CSPR #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR_EARLY #define CONFIG_SYS_CSPR2_FINAL CONFIG_SYS_NOR1_CSPR #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK_EARLY #define CONFIG_SYS_AMASK2_FINAL CONFIG_SYS_NOR_AMASK #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024) #endif #else #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY #define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY #define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK_EARLY #define CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_NOR_AMASK #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 /* * I2C */ #define I2C_MUX_PCA_ADDR 0x77 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ /* I2C bus multiplexer */ #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ /* * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure. * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0 * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1 */ #define FSL_QIXIS_BRDCFG9_QSPI 0x1 /* * MMC */ #ifdef CONFIG_MMC #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \ QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER) #endif /* * RTC configuration */ #define RTC #define CONFIG_RTC_DS3231 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_FSL_MEMAC #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW #endif /* Initial environment variables */ #undef CONFIG_EXTRA_ENV_SETTINGS #ifdef CONFIG_NXP_ESBC #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ "mcinitcmd=esbc_validate 0x580640000;" \ "esbc_validate 0x580680000;" \ "fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" #else #ifdef CONFIG_TFABOOT #define SD_MC_INIT_CMD \ "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ "mmc read 0x80e00000 0x7000 0x800;" \ "fsl_mc start mc 0x80a00000 0x80e00000\0" #define IFC_MC_INIT_CMD \ "fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "loadaddr_sd=0x90100000\0" \ "kernel_addr=0x581000000\0" \ "kernel_addr_sd=0x8000\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581000000\0" \ "kernel_start_sd=0x8000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "kernel_size_sd=0x14000\0" \ "load_addr=0xa0000000\0" \ "kernelheader_addr=0x580600000\0" \ "kernelheader_addr_r=0x80200000\0" \ "kernelheader_size=0x40000\0" \ "BOARD=ls2088aqds\0" \ "mcmemsize=0x70000000 \0" \ "scriptaddr=0x80000000\0" \ "scripthdraddr=0x80080000\0" \ IFC_MC_INIT_CMD \ BOOTENV \ "boot_scripts=ls2088aqds_boot.scr\0" \ "boot_script_hdr=hdr_ls2088aqds_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ "for distro_bootpart in ${devplist}; do " \ "if fstype ${devtype} " \ "${devnum}:${distro_bootpart} " \ "bootfstype; then " \ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ "boot_a_script=" \ "load ${devtype} ${devnum}:${distro_bootpart} " \ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ "${scripthdraddr} ${prefix}${boot_script_hdr} " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "nor_bootcmd=echo Trying load from nor..;" \ "cp.b $kernel_addr $load_addr " \ "$kernel_size ; env exists secureboot && " \ "cp.b $kernelheader_addr $kernelheader_addr_r " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ "bootm $load_addr#$BOARD\0" \ "sd_bootcmd=echo Trying load from SD ..;" \ "mmcinfo; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd && " \ "bootm $load_addr#$BOARD\0" #elif defined(CONFIG_SD_BOOT) #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x90100000\0" \ "kernel_addr=0x800\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x8000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x14000\0" \ "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ "mmc read 0x80e00000 0x7000 0x800;" \ "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" #endif /* CONFIG_TFABOOT */ #endif /* CONFIG_NXP_ESBC */ #ifdef CONFIG_TFABOOT #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 0) \ func(SCSI, scsi, 0) \ func(DHCP, dhcp, na) #include #define SD_BOOTCOMMAND \ "env exists mcinitcmd && env exists secureboot "\ "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \ "&& esbc_validate $load_addr; " \ "env exists mcinitcmd && run mcinitcmd " \ "&& mmc read 0x80d00000 0x6800 0x800 " \ "&& fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run sd_bootcmd; " \ "env exists secureboot && esbc_halt;" #define IFC_NOR_BOOTCOMMAND \ "env exists mcinitcmd && env exists secureboot "\ "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\ "&& fsl_mc lazyapply dpl 0x580d00000;" \ "run distro_bootcmd;run nor_bootcmd; " \ "env exists secureboot && esbc_halt;" #endif #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) #define CONFIG_FSL_MEMAC #define SGMII_CARD_PORT1_PHY_ADDR 0x1C #define SGMII_CARD_PORT2_PHY_ADDR 0x1d #define SGMII_CARD_PORT3_PHY_ADDR 0x1E #define SGMII_CARD_PORT4_PHY_ADDR 0x1F #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf #define CONFIG_ETHPRIME "DPMAC1@xgmii" #endif #include #endif /* __LS2_QDS_H */