* Intel FSP-S configuration Several Intel platforms require the execution of the Intel FSP (Firmware Support Package) for initialization. The FSP consists of multiple parts, one of which is the FSP-S (Silicon initialization phase). This binding applies to the FSP-S for the Intel Apollo Lake SoC. The FSP-S is available on Github [1]. For detailed information on the FSP-S parameters see the documentation in FSP/ApolloLakeFspBinPkg/Docs [2]. The properties of this binding are all optional. If no properties are set the values of the FSP-S are used. [1] https://github.com/IntelFsp/FSP [2] https://github.com/IntelFsp/FSP/tree/master/ApolloLakeFspBinPkg/Docs Optional properties: - fsps,active-processor-cores: ActiveProcessorCores - fsps,disable-core1: Disable Core1 - fsps,disable-core2: Disable Core2 - fsps,disable-core2: Disable Core3 - fsps,vmx-enable: VMX Enable - fsps,proc-trace-mem-size: Memory region allocation for Processor Trace 0xFF: Disable (default) - fsps,proc-trace-enable: Enable Processor Trace - fsps,eist: Eist - fsps,boot-p-state: Boot PState 0: HFM (default) 1: LFM - fsps,enable-cx: CPU power states (C-states) - fsps,c1e: Enhanced C-states - fsps,bi-proc-hot: Bi-Directional PROCHOT# - fsps,pkg-c-state-limit: Max Pkg Cstate 0: PkgC0C1 1: PkgC2 2: PkgC3 (default) 3: PkgC6 4: PkgC7 5: PkgC7s 6: PkgC8 7: PkgC9 8: PkgC10 9: PkgCMax 254: PkgCpuDefault 255: PkgAuto - fsps,c-state-auto-demotion: C-State auto-demotion 0: Disable C1 and C3 Auto-demotion (default) 1: Enable C3/C6/C7 Auto-demotion to C1 2: Enable C6/C7 Auto-demotion to C3 3: Enable C6/C7 Auto-demotion to C1 and C3 - fsps,c-state-un-demotion: C-State un-demotion 0: Disable C1 and C3 Un-demotion (default) 1: Enable C1 Un-demotion 2: Enable C3 Un-demotion 3: Enable C1 and C3 Un-demotion - fsps,max-core-c-state: Max Core C-State 0: Unlimited 1: C1 2: C3 3: C6 4: C7 5: C8 6: C9 7: C10 8: CCx (default) - fsps,pkg-c-state-demotion: Package C-State Demotion - fsps,pkg-c-state-un-demotion: Package C-State Un-demotion - fsps,turbo-mode: Turbo Mode - fsps,hda-verb-table-entry-num: SC HDA Verb Table Entry Number 0: (default) - fsps,hda-verb-table-ptr: SC HDA Verb Table Pointer 0x00000000: (default) - fsps,p2sb-unhide: Enable/Disable P2SB device hidden - fsps,ipu-en: IPU Enable/Disable - fsps,ipu-acpi-mode: IMGU ACPI mode selection 0: Auto 1: IGFX Child device (default) 2: ACPI device - fsps,force-wake: Enable ForceWake - fsps,gtt-mm-adr: GttMmAdr 0xbf000000: (default) - fsps,gm-adr: GmAdr 0xa0000000: (default) - fsps,pavp-lock: Enable PavpLock - fsps,graphics-freq-modify: Enable GraphicsFreqModify - fsps,graphics-freq-req: Enable GraphicsFreqReq - fsps,graphics-video-freq: Enable GraphicsVideoFreq - fsps,pm-lock: Enable PmLock - fsps,dop-clock-gating: Enable DopClockGating - fsps,unsolicited-attack-override: Enable UnsolicitedAttackOverride - fsps,wopcm-support: Enable WOPCMSupport - fsps,wopcm-size: Enable WOPCMSize - fsps,power-gating: Enable PowerGating - fsps,unit-level-clock-gating: Enable UnitLevelClockGating - fsps,fast-boot: Enable FastBoot - fsps,dyn-sr: Enable DynSR - fsps,sa-ipu-enable: Enable SaIpuEnable - fsps,pm-support: GT PM Support - fsps,enable-render-standby: RC6(Render Standby) - fsps,logo-size: BMP Logo Data Size - fsps,logo-ptr: BMP Logo Data Pointer - fsps,graphics-config-ptr: Graphics Configuration Data Pointer - fsps,pavp-enable: PAVP Enable - fsps,pavp-pr3: PAVP PR3 - fsps,cd-clock: CdClock Frequency selection 0: 144MHz 1: 288MHz 2: 384MHz 3: 576MHz 4: 624MHz (default) - fsps,pei-graphics-peim-init: Enable/Disable PeiGraphicsPeimInit - fsps,write-protection-enable: Write Protection Support - fsps,read-protection-enable: Read Protection Support - fsps,protected-range-limit: Protected Range Limitation 0x0FFF: (default) - fsps,protected-range-base: Protected Range Base 0x0000: (default) - fsps,gmm: Enable SC Gaussian Mixture Models - fsps,clk-gating-pgcb-clk-trunk: GMM Clock Gating - PGCB Clock Trunk - fsps,clk-gating-sb: GMM Clock Gating - Sideband - fsps,clk-gating-sb-clk-trunk: GMM Clock Gating - Sideband - fsps,clk-gating-sb-clk-partition: GMM Clock Gating - Sideband Clock Partition - fsps,clk-gating-core: GMM Clock Gating - Core - fsps,clk-gating-dma: GMM Clock Gating - DMA - fsps,clk-gating-reg-access: GMM Clock Gating - Register Access - fsps,clk-gating-host: GMM Clock Gating - Host - fsps,clk-gating-partition: GMM Clock Gating - Partition - fsps,clk-gating-trunk: Clock Gating - Trunk - fsps,hda-enable: HD Audio Support - fsps,dsp-enable: HD Audio DSP Support - fsps,pme: Azalia wake-on-ring - fsps,hd-audio-io-buffer-ownership: HD-Audio I/O Buffer Ownership 0: HD-Audio link owns all the I/O buffers (default) 1: HD-Audio link owns 4 I/O buffers and I2S port owns 4 I/O buffers 3: I2S port owns all the I/O buffers - fsps,hd-audio-io-buffer-voltage: HD-Audio I/O Buffer Voltage 0: 3.3V (default) 1: 1.8V - fsps,hd-audio-vc-type: HD-Audio Virtual Channel Type 0: VC0 (default) 1: VC1 - fsps,hd-audio-link-frequency: HD-Audio Link Frequency 0: 6MHz (default) 1: 12MHz 2: 24MHz 3: 48MHz 4: 96MHz 5: Invalid - fsps,hd-audio-i-disp-link-frequency: HD-Audio iDisp-Link Frequency 0: 6MHz (default) 1: 12MHz 2: 24MHz 3: 48MHz 4: 96MHz 5: Invalid - fsps,hd-audio-i-disp-link-tmode: HD-Audio iDisp-Link T-Mode 0: 2T (default) 1: 1T - fsps,dsp-endpoint-dmic: HD-Audio Disp DMIC 0: disable, 1: 2ch array (default) 2: 4ch array - fsps,dsp-endpoint-bluetooth: HD-Audio Bluetooth - fsps,dsp-endpoint-i2s-skp: HD-Audio I2S SHK - fsps,dsp-endpoint-i2s-hp: HD-Audio I2S HP - fsps,audio-ctl-pwr-gate: HD-Audio Controller Power Gating (deprecated) - fsps,audio-dsp-pwr-gate: HD-Audio ADSP Power Gating (deprecated) - fsps,mmt: HD-Audio CSME Memory Transfers 0: VC0 (default) 1: VC2 - fsps,hmt: HD-Audio Host Memory Transfers 0: VC0 (default) 1: VC2 - fsps,hd-audio-pwr-gate: HD-Audio Power Gating - fsps,hd-audio-clk-gate: HD-Audio Clock Gating - fsps,dsp-feature-mask: Bitmask of DSP Feature 0x01: WoV 0x02: BT Sideband 0x04: Codec VAD 0x20: BT Intel HFP 0x40: BT Intel A2DP 0x80: DSP based speech pre-processing disabled - fsps,dsp-pp-module-mask: Bitmask of supported DSP Post-Processing Modules 0x01: WoV 0x02: BT Sideband 0x04: Codec VAD 0x20: BT Intel HFP 0x40: BT Intel A2DP 0x80: DSP based speech pre-processing disabled - fsps,bios-cfg-lock-down: HD-Audio BIOS Configuration Lock Down - fsps,hpet: Enable High Precision Timer - fsps,hpet-bdf-valid: Hpet Valid BDF Value - fsps,hpet-bus-number: Bus Number of Hpet 0xFA: (default) - fsps,hpet-device-number: Device Number of Hpet 0x1F: (default) - fsps,hpet-function-number: Function Number of Hpet 0x00: (default) - fsps,io-apic-bdf-valid: IoApic Valid BDF Value - fsps,io-apic-bus-number: Bus Number of IoApic 0xFA: (default) - fsps,io-apic-device-number: Device Number of IoApic 0x0F: (default) - fsps,io-apic-function-number: Function Number of IoApic 0x00: (default) - fsps,io-apic-entry24-119: IOAPIC Entry 24-119 - fsps,io-apic-id: IO APIC ID 0x01: (default) - fsps,io-apic-range-select: IoApic Range 0x00: (default) - fsps,ish-enable: ISH Controller - fsps,bios-interface: BIOS Interface Lock Down - fsps,bios-lock: Bios LockDown Enable - fsps,spi-eiss: SPI EISS Status - fsps,bios-lock-sw-smi-number: BiosLock SWSMI Number 0xA9: (default) - fsps,lpss-s0ix-enable: LPSS IOSF PMCTL S0ix Enable - fsps,i2c-clk-gate-cfg: LPSS I2C Clock Gating Configuration - fsps,hsuart-clk-gate-cfg: LPSS HSUART Clock Gating Configuration - fsps,spi-clk-gate-cfg: LPSS SPI Clock Gating Configuration - fsps,i2cX-enable: 2C Device X 0: Disabled 1: PCI Mode (default) 2: ACPI Mode - fsps,hsuartX-enable: UART Device X 0: Disabled 1: PCI Mode (default) 2: ACPI Mode - fsps,spiX-enable: SPI UART Device X 0: Disabled 1: PCI Mode (default) 2: ACPI Mode - fsps,os-dbg-enable: OS Debug Feature - fsps,dci-en: DCI Feature - fsps,uart2-kernel-debug-base-address: UART Debug Base Address 0x00000000: (default) - fsps,pcie-clock-gating-disabled: Enable PCIE Clock Gating - fsps,pcie-root-port8xh-decode: Enable PCIE Root Port 8xh Decode - fsps,pcie8xh-decode-port-index: PCIE 8xh Decode Port Index 0x00: (default) - fsps,pcie-root-port-peer-memory-write-enable: Enable PCIE Root Port Peer Memory Write - fsps,pcie-aspm-sw-smi-number: PCIE SWSMI Number 0xAA: (default) - fsps,pcie-root-port-en: PCI Express Root Port - fsps,pcie-rp-hide: Hide PCIE Root Port Configuration Space - fsps,pcie-rp-slot-implemented: PCIE Root Port Slot Implement - fsps,pcie-rp-hot-plug: Hot Plug - fsps,pcie-rp-pm-sci: PCIE PM SCI - fsps,pcie-rp-ext-sync: PCIE Root Port Extended Sync - fsps,pcie-rp-transmitter-half-swing: Transmitter Half Swing - fsps,pcie-rp-acs: ACS - fsps,pcie-rp-clk-req-supported: Clock Request Support - fsps,pcie-rp-clk-req-number: Configure CLKREQ Number - fsps,pcie-rp-clk-req-detect: CLKREQ# Detection - fsps,advanced-error-reportingt: Advanced Error Reporting - fsps,pme-interrupt: PME Interrupt - fsps,unsupported-request-report: URR - fsps,fatal-error-report: FER - fsps,no-fatal-error-report: NFER - fsps,correctable-error-report: CER - fsps,system-error-on-fatal-error: SEFE - fsps,system-error-on-non-fatal-error: SENFE - fsps,system-error-on-correctable-error: SECE - fsps,pcie-rp-speed: PCIe Speed - fsps,physical-slot-number: Physical Slot Number 0: Auto (default) 1: Gen1 2: Gen2 3: Gen3 - fsps,pcie-rp-completion-timeout: CTO 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 (default) - fsps,enable-ptm: PTM Support - fsps,pcie-rp-aspm: ASPM - fsps,pcie-rp-l1-substates: L1 Substates - fsps,pcie-rp-ltr-enable: PCH PCIe LTR - fsps,pcie-rp-ltr-config-lock: PCIE LTR Lock - fsps,pme-b0-s5-di: PME_B0_S5 Disable bit - fsps,pci-clock-run: PCI Clock Run - fsps,timer8254-clk-setting: Enable/Disable Timer 8254 Clock Setting - fsps,enable-sata: Chipset SATA - fsps,sata-mode: SATA Mode Selection 0: AHCI (default) 1: RAID - fsps,sata-salp-support: Aggressive LPM Support - fsps,sata-pwr-opt-enable: SATA Power Optimization - fsps,e-sata-speed-limit: eSATA Speed Limit - fsps,speed-limit: SATA Speed Limit 0x1: 1.5Gb/s(Gen 1) 0x2: 3Gb/s(Gen 2) 0x3: 6Gb/s(Gen 3) - fsps,sata-ports-enable: SATA Port - fsps,sata-ports-dev-slp: SATA Port DevSlp - fsps,sata-ports-hot-plug: SATA Port HotPlug - fsps,sata-ports-interlock-sw: Mechanical Presence Switch - fsps,sata-ports-external: External SATA Ports - fsps,sata-ports-spin-up: Spin Up Device - fsps,sata-ports-solid-state-drive: SATA Solid State 0: Hard Disk Drive (default) 1: Solid State Drive - fsps,sata-ports-enable-dito-config: DITO Configuration - fsps,sata-ports-dm-val: DM Value 0x0F: Maximum (default) - fsps,sata-ports-dito-val: DITO Value 0x0271 (default) - fsps,sub-system-vendor-id: Subsystem Vendor ID 0x8086: (default) - fsps,sub-system-id: Subsystem ID 0x7270: (default) - fsps,crid-setting: CRIDSettings 0: Disable (default) 1: CRID_1 2: CRID_2 3: CRID_3 - fsps,reset-select: ResetSelect 0x6: warm reset (default) 0xE: cold reset - fsps,sdcard-enabled: SD Card Support (D27:F0) - fsps,emmc-enabled: SeMMC Support (D28:F0) - fsps,emmc-host-max-speed: eMMC Max Speed 0: HS400(default) 1: HS200 2: DDR50 - fsps,ufs-enabled: UFS Support (D29:F0) - fsps,sdio-enabled: SDIO Support (D30:F0) - fsps,gpp-lock: GPP Lock Feature - fsps,sirq-enable: Serial IRQ - fsps,sirq-mode: Serial IRQ Mode 0: Quiet mode (default) 1: Continuous mode - fsps,start-frame-pulse: Start Frame Pulse Width 0: ScSfpw4Clk (default) 1: ScSfpw6Clk 2: ScSfpw8Clk - fsps,smbus-enable: SMBus - fsps,arp-enable: SMBus ARP Support - fsps,num-rsvd-smbus-addresses: SMBus Table Elements 0x0080: (default) - fsps,rsvd-smbus-address-table: Reserved SMBus Address Table 0x00: (default) - fsps,disable-compliance-mode: XHCI Disable Compliance Mode - fsps,usb-per-port-ctl: USB Per-Port Control - fsps,usb30-mode: xHCI Mode 0: Disable 1: Enable 2: Auto (default) - fsps,port-usb20-enable: Enable USB2 ports - fsps,port-usb20-over-current-pin: USB20 Over Current Pin - fsps,usb-otg: XDCI Support 0: Disable 1: PCI_Mode (default) 2: ACPI_mode - fsps,hsic-support-enable: Enable XHCI HSIC Support - fsps,port-usb30-enable: Enable USB3 ports - fsps,port-usb30-over-current-pin: USB30 Over Current Pin - fsps,ssic-port-enable: Enable XHCI SSIC Support - fsps,dlane-pwr-gating: SSIC Dlane PowerGating - fsps,vtd-enable: VT-d - fsps,lock-down-global-smi: SMI Lock bit - fsps,reset-wait-timer: HDAudio Delay Timer 0x012C: (default) - fsps,rtc-lock: RTC Lock Bits - fsps,sata-test-mode: SATA Test Mode Selection - fsps,ssic-rate: XHCI SSIC RATE 1: A Series (default) 2: B Series - fsps,dynamic-power-gating: SMBus Dynamic Power Gating - fsps,pcie-rp-ltr-max-snoop-latency: Max Snoop Latency 0x0000: (default) - fsps,pcie-rp-snoop-latency-override-mode: Snoop Latency Override 0: Disable 1: Enable 2: Auto (default) - fsps,pcie-rp-snoop-latency-override-value: Snoop Latency Value 0x003C (default) - fsps,pcie-rp-snoop-latency-override-multiplier: Snoop Latency Multiplier 0: 1ns 1: 32ns 2: 1024ns (default) 3: 32768ns 4: 1048576ns 5: 33554432ns - fsps,skip-mp-init: Skip Multi-Processor Initialization - fsps,dci-auto-detect: DCI Auto Detect - fsps,pcie-rp-ltr-max-non-snoop-latency: Max Non-Snoop Latency 0x0000: (default) - fsps,pcie-rp-non-snoop-latency-override-mode: Non Snoop Latency Override - fsps,tco-timer-halt-lock: Halt and Lock TCO Timer - fsps,pwr-btn-override-period: Power Button Override Period 000: 4s (default) 001: 6s 010: 8s 011: 10s 100: 12s 101: 14s - fsps,pcie-rp-non-snoop-latency-override-value: 0x003C: (default) - fsps,pcie-rp-non-snoop-latency-override-multiplier: Non Snoop Latency Value 0: 1ns 1: 32ns 2: 1024ns (default) 3: 32768ns 4: 1048576ns 5: 33554432ns - fsps,pcie-rp-slot-power-limit-scale: PCIE Root Port Slot Power Limit Scale 0x00: (default) - fsps,pcie-rp-slot-power-limit-value: 0x00: (default) - fsps,disable-native-power-button: Power Button Native Mode Disable - fsps,power-butter-debounce-mode: Power Button Debounce Mode - fsps,sdio-tx-cmd-cntl: SDIO_TX_CMD_DLL_CNTL 0x505: (default) - fsps,sdio-tx-data-cntl1: SDIO_TX_DATA_DLL_CNTL1 0xE: (default) - fsps,sdio-tx-data-cntl2: SDIO_TX_DATA_DLL_CNTL2 0x22272828: (default) - fsps,sdio-rx-cmd-data-cntl1: SDIO_RX_CMD_DATA_DLL_CNTL1 0x16161616: (default) - fsps,sdio-rx-cmd-data-cntl2: SDIO_RX_CMD_DATA_DLL_CNTL2 0x10000: (default) - fsps,sdcard-tx-cmd-cntl: SDCARD_TX_CMD_DLL_CNTL 0x505 (default) - fsps,sdcard-tx-data-cntl1: SDCARD_TX_DATA_DLL_CNTL1 0xA13: (default) - fsps,sdcard-tx-data-cntl2: SDCARD_TX_DATA_DLL_CNTL2 0x24242828: (default) - fsps,sdcard-rx-cmd-data-cntl1: SDCARD_RX_CMD_DATA_DLL_CNTL1 0x73A3637 (default) - fsps,sdcard-rx-strobe-cntl: SDCARD_RX_STROBE_DLL_CNTL 0x0: (default) - fsps,sdcard-rx-cmd-data-cntl2: SDCARD_RX_CMD_DATA_DLL_CNTL2 0x10000: (default) - fsps,emmc-tx-cmd-cntl: EMMC_TX_CMD_DLL_CNTL 0x505: (default) - fsps,emmc-tx-data-cntl1: EMMC_TX_DATA_DLL_CNTL1 0xC11: (default) - fsps,emmc-tx-data-cntl2: EMMC_TX_DATA_DLL_CNTL2 0x1C2A2927: (default) - fsps,emmc-rx-cmd-data-cntl1: EMMC_RX_CMD_DATA_DLL_CNTL1 0x000D162F: (default) - fsps,emmc-rx-strobe-cntl: EMMC_RX_STROBE_DLL_CNTL 0x0a0a: (default) - fsps,emmc-rx-cmd-data-cntl2: EMMC_RX_CMD_DATA_DLL_CNTL2 0x1003b: (default) - fsps,emmc-master-sw-cntl: EMMC_MASTER_DLL_CNTL 0x001: (default) - fsps,pcie-rp-selectable-deemphasis: PCIe Selectable De-emphasis 1: -3.5 dB (default) 0: -6 dB - fsps,monitor-mwait-enable: Monitor Mwait Enable - fsps,hd-audio-dsp-uaa-compliance: Universal Audio Architecture compliance for DSP enabled system - fsps,ipc: IRQ Interrupt Polarity Control - fsps,sata-ports-disable-dynamic-pg: Disable ModPHY dynamic power gate - fsps,init-s3-cpu: Init CPU during S3 resume - fsps,skip-punit-init: Skip P-unit Initialization - fsps,port-usb20-per-port-tx-pe-half: PerPort Half Bit Pre-emphasis - fsps,port-usb20-per-port-pe-txi-set: PerPort HS Pre-emphasis Bias - fsps,port-usb20-per-port-txi-set: PerPort HS Transmitter Bias - fsps,port-usb20-hs-skew-sel: Select the skew direction for HS transition - fsps,port-usb20-i-usb-tx-emphasis-en: PerPort HS Transmitter Emphasis - fsps,port-usb20-per-port-rxi-set: PerPort HS Receiver Bias - fsps,port-usb20-hs-npre-drv-sel: Delay/skew's strength control for HS driver - fsps,os-selection: OS Selection 0: Windows 1: Android 3: Linux - fsps,dptf-enabled: DPTF - fsps,pwm-enabled: PWM Enabled Example: &fsp_s { bootph-some-ram; fsps,ish-enable = <0>; fsps,enable-sata = <0>; fsps,pcie-root-port-en = [00 00 00 00 00 01]; fsps,pcie-rp-hot-plug = [00 00 00 00 00 01]; fsps,i2c6-enable = ; fsps,i2c7-enable = ; fsps,hsuart3-enable = ; fsps,spi1-enable = ; fsps,spi2-enable = ; fsps,sdio-enabled = <0>; ... };