/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2015 Freescale Semiconductor, Inc. * * Configuration settings for the SolidRun mx6 based boards */ #ifndef __MX6CUBOXI_CONFIG_H #define __MX6CUBOXI_CONFIG_H #include <linux/stringify.h> #include "mx6_common.h" #include "imx6_spl.h" #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR /* SATA Configuration */ #ifdef CONFIG_CMD_SATA #define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 #endif /* Framebuffer */ #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP /* USB */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) /* Command definition */ #define CONFIG_MXC_UART_BASE UART1_BASE #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "som_rev=undefined\0" \ "has_emmc=undefined\0" \ "fdtfile=undefined\0" \ "fdt_addr_r=0x18000000\0" \ "fdt_addr=0x18000000\0" \ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ "ramdisk_addr_r=0x13000000\0" \ "ramdiskaddr=0x13000000\0" \ "initrd_high=0xffffffff\0" \ "ip_dyn=yes\0" \ "console=ttymxc0\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "finduuid=part uuid mmc 1:1 uuid\0" \ "update_sd_firmware=" \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ "else " \ "setenv get_cmd tftp; " \ "fi; " \ "if mmc dev ${mmcdev}; then " \ "if ${get_cmd} ${update_sd_firmware_filename}; then " \ "setexpr fw_sz ${filesize} / 0x200; " \ "setexpr fw_sz ${fw_sz} + 1; " \ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ "fi; " \ "fi\0" \ "findfdt="\ "if test ${board_rev} = MX6Q; then " \ "setenv fdtprefix imx6q; fi; " \ "if test ${board_rev} = MX6DL; then " \ "setenv fdtprefix imx6dl; fi; " \ "if test ${som_rev} = V15; then " \ "setenv fdtsuffix -som-v15; fi; " \ "if test ${has_emmc} = yes; then " \ "setenv emmcsuffix -emmc; fi; " \ "if test ${board_name} = HUMMINGBOARD2 ; then " \ "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \ "if test ${board_name} = HUMMINGBOARD ; then " \ "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \ "if test ${board_name} = CUBOXI ; then " \ "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \ "if test ${fdtfile} = undefined; then " \ "echo WARNING: Could not determine dtb to use; fi; \0" \ BOOTENV #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ func(SATA, sata, 0) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> #else #define CONFIG_EXTRA_ENV_SETTINGS #endif /* CONFIG_SPL_BUILD */ /* Physical Memory Map */ #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Environment organization */ #endif /* __MX6CUBOXI_CONFIG_H */