// SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (C) 2016 ARM Ltd. // Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de> /dts-v1/; #include "sun50i-h5.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Xunlong Orange Pi Zero Plus"; compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5"; reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; aliases { ethernet0 = &emac; ethernet1 = &rtl8189ftv; serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; }; leds { compatible = "gpio-leds"; led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ default-state = "on"; }; led-1 { label = "orangepi:red:status"; gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ }; }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <100000>; enable-active-high; gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ }; }; &ehci0 { status = "okay"; }; &ehci1 { status = "okay"; }; &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; status = "okay"; }; &external_mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; &mmc1 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; status = "okay"; /* * Explicitly define the sdio device, so that we can add an ethernet * alias for it (which e.g. makes u-boot set a mac-address). */ rtl8189ftv: sdio_wifi@1 { reg = <1>; }; }; &spi0 { status = "okay"; flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mxicy,mx25l1606e", "winbond,w25q128"; reg = <0>; spi-max-frequency = <40000000>; }; }; &ohci0 { status = "okay"; }; &ohci1 { status = "okay"; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; &usb_otg { dr_mode = "peripheral"; status = "okay"; }; &usbphy { /* USB Type-A ports' VBUS is always on */ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ status = "okay"; };